To avoid these ads, REGISTER NOW!

Cleaning concrete

ratdoggy

Well-known member
Joined
Mar 27, 2009
Messages
11,971
Location
Akron-Canton area OH
My concrete drive has some stains on it I want to remove oil and rust spots (from our Ohio winters) What's the best stuff to use for them?
 
To avoid these ads, REGISTER NOW!

Shea

Well-known member
Joined
Sep 19, 2012
Messages
2,864
Location
California
If they aren't too big, Pour-N-Restore works great. Another alternative which is low cost would be to scrub it with some powder laundry detergent. Use a clean wire brush on the concrete for the rust and it will usually come right up.
 

LG63

Well-known member
Joined
Sep 7, 2012
Messages
1,003
I've use muriatic acid on rust with some success. Obviously you need to be very careful with the stuff.....gloves, goggles, etc.
 
To avoid these ads, REGISTER NOW!

Garage Flooring

ALLIANCE MEMBER
Joined
May 21, 2011
Messages
5,288
Location
Grand Junction, CO
Cleaning and removing oil stains are two different functions. As Shea stated Pour N Restore is best for removing oil spots.


The same manufacturer makes a rust stain remover as well. I have never tried it so I do not sell it. I would be happy to try and get a bottle for you as a sample, if you would provide some feedback and get the Oil Stain remover from us

http://www.pour-n-restore.com/CA-Rust-Remover-Flyer.pdf
 

noweare

Active member
Joined
Jan 4, 2010
Messages
28
Location
Northeast
Use a black stripping pad on a buffer and a degreaser. Rinse the driveway with water
well after cleaning.
 
To avoid these ads, REGISTER NOW!
Top Bottom