Clear Sealer

[Rix65]

Is there a clear coat that I can apply to the current condition of my garage floor with all of its flaws? There are spots and stains however I intend to acid wash the floor. After that I'd like to apply product for that glossy clear finish.

Thanks

 

[LegacyIndustrial]

We have several to look at:

http://www.legacyindustrial.net/products/concrete-sealers/

 

[Garage Flooring]

Is there a clear coat that I can apply to the current condition of my garage floor with all of its flaws? There are spots and stains however I intend to acid wash the floor. After that I'd like to apply product for that glossy clear finish.

Thanks

Acrylics won't hold up and most penetrating sealers won't give you the gloss you want. If you clean and etch your floor I would do two coats of Rust Bullet clear urethane.

 

[Rix65]

Also, would the surface be overly slick when wet?

 

[Garage Flooring]

Also, would the surface be overly slick when wet?

ANY coated surface can be slick when wet. We include antiskid at no charge.

 

[Garage Flooring]

here is the link I was looking for earlier. http://www.garagejournal.com/forum/showthread.php?t=298946&highlight=clear+rust+bullet

 

[LegacyIndustrial]

Also, would the surface be overly slick when wet?

Yes, any time you improve the surface with a coating there is more chance for "slippery when wet". Thinner coatings less so and thicker more.

When selecting an anti-skid, choose one that will not cut your feet or defeat your mop. Steer clear of aluminum oxide, silica sand. Even tabular alumina if not used correctly can screw up your floor.

http://www.legacyindustrial.net/products/concrete-sealers/hdgrip-soft-skid-media.html

 

[Rix65]

Yes, any time you improve the surface with a coating there is more chance for "slippery when wet". Thinner coatings less so and thicker more.

When selecting an anti-skid, choose one that will not cut your feet or defeat your mop. Steer clear of aluminum oxide, silica sand. Even tabular alumina if not used correctly can screw up your floor.

http://www.legacyindustrial.net/products/concrete-sealers/hdgrip-soft-skid-media.html

What would you suggest for a anti skid?

 

[LegacyIndustrial]

Our HDGrip-Soft-Skid is the best and available in (3) grades. Ultra-Fine, Fine and Coarse.
http://www.legacyindustrial.net/products/concrete-sealers/hdgrip-soft-skid-media.html

 

[Rix65]

We have several to look at:

http://www.legacyindustrial.net/products/concrete-sealers/

Can you tell me what product is used in image five of your photo gallery? That is the look I'm after.

Thanks