You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
CNC Router Recommendations
- Thread starter duc916
- Start date
dr_clyde
Well-known member
What’s your budget? Hobby or are you wanting to make money with it?
meathooker
Well-known member
Got a laguna swift 4x8 for home hobby use and some side job stuff back in May. It seems like a decent unit. Wish I’d gotten a tool changer.
If this makes enough $$ to justify a new machine with tool changer the next one will be a laguna.
If this makes enough $$ to justify a new machine with tool changer the next one will be a laguna.
Gogo300
Well-known member
biesse skill 1536 g ft
Great machine. Good support. You can get an auto loader and an unloading table as options
Good operator interface. Can program at the machine without knowing gcode.
Runs plywood, mdf, particle board, 3form,
Vacuum table has zones so your not trying to pull a vacuum across the whole table. Vacuum zone can be small as 24” x 24”. Spoilboard bolts down with nylon bolts so the spoilboard won’t warp overnight.
Great machine. Good support. You can get an auto loader and an unloading table as options
Good operator interface. Can program at the machine without knowing gcode.
Runs plywood, mdf, particle board, 3form,
Vacuum table has zones so your not trying to pull a vacuum across the whole table. Vacuum zone can be small as 24” x 24”. Spoilboard bolts down with nylon bolts so the spoilboard won’t warp overnight.
Last edited: