Coating the garage in sections

[bsmiddleton]

This is my first post and I know fairly little about concrete, epoxies etc so take it easy on me. I've got a 30 x 50 garage and I can't sit all my the stuff in it out on the driveway for days or weeks. I know that you are supposed to epoxy to a wet edge but can I do my garage in sections if I coat up to the stress relief cuts?
thanks
Scott

 

[Shea]

Yes you can. You wouldn't be the first person here who has done that.

 

[srode]

This is my first post and I know fairly little about concrete, epoxies etc so take it easy on me. I've got a 30 x 50 garage and I can't sit all my the stuff in it out on the driveway for days or weeks. I know that you are supposed to epoxy to a wet edge but can I do my garage in sections if I coat up to the stress relief cuts?
thanks
Scott

thats what I did - worked fine. Mask the areas you aren't going to do and have already done and when you are ready for the next area go over the edge where you had masking tape with acetone to make sure any adhesive residue is removed first.

 

[Baada]

Check out my basement overhaul to see how I did it and the end results. If you have cuts in the floor it would be even easier.

 

[bsmiddleton]

Good stuff. Thanks guys.

 

[pauloman]

years ago we did massive post office floors in sections for obvious reasons.

PM me for additional info