Compact 90* Air Drills?

[JDon99]

I will be doing a job soon that will require a very compact 90 degree drill, I know my 18v dewalt will not fin so I am going to look at the pneumatic drills. Who makes a very compact drill that doesn't cost a fortune?

 

[Buckgnarly]

IR. I have used a 3" hole saw on mine to do a Jeep intake, works great!

http://www.amazon.com/dp/B0002SRMZG/?tag=atomicindus08-20

 

[Zeke]

 

[Cope]

I will be doing a job soon that will require a very compact 90 degree drill, I know my 18v dewalt will not fin so I am going to look at the pneumatic drills. Who makes a very compact drill that doesn't cost a fortune?

Look at CP or IR.

 

[bdunn]

Depends on what a fortune is to you, but we use Florida pneumatic butterfly and 90 degree drills at work and they hold up really well!

 

[firebox40dash5]

Got a 1/4" air ratchet?

http://www.cornwelltools.com/webcat/products.php?product=AJM431C-%2d-Drill-Chuck-Adaptor-Kit#

We use a kit like this at work... not the fastest, but when it's all that fits, it's a lot faster than spinning a bit in your fingers.

 

[Charles (in GA)]

What type or size bit will you be using. Lots of aircraft air drills out there. They take a ¼-28 threaded bit or adapters. Sioux, Dotco, IR, Several clones of older models. lots of new and used stuff on the market.

Charles

http://www.ustool.com/air-tools/angle-air-drills.html?osCsid=f5eq2ml5ir5heitmm7aiaraq26

http://www.browntool.com/Default.aspx?tabid=344&CategoryID=335&Level=a

http://www.yardstore.com/browse.cfm/2,274.html

 

[jmglastetter]

Smallest one I've ever seen. Just bought this 90 degree adapter for myself. Goes onto your regular impact driver and only costs 18 bucks. It's made for hex bits and made for impacts. The whole top section only measures a little over an inch across.

www.homedepot.com/p/DEWALT-Right-Angle-Drill-Adapter/203867866/