burgie
Well-known member
Good evening...
Well...my compressor is mobile
!!!
Tonight I milled some Poplar rails and attached four 6" Colson casters; 2 fixed and 2 swivel with locks. With the help of my daughter's boyfriend we tilted the tank to one side, then the other, and bolted the rails to the feet on each side.
I also installed the Swagelok 3/8" stainless steel tank drain system. It is comprised of an elbow, tubing and 1/4 turn valve which are then connected to stainless steel braided hose. I used a simple conduit wall clip as a holder...
Nice to get it off my lift for a while!!!
Well...my compressor is mobile
!!!Tonight I milled some Poplar rails and attached four 6" Colson casters; 2 fixed and 2 swivel with locks. With the help of my daughter's boyfriend we tilted the tank to one side, then the other, and bolted the rails to the feet on each side.
I also installed the Swagelok 3/8" stainless steel tank drain system. It is comprised of an elbow, tubing and 1/4 turn valve which are then connected to stainless steel braided hose. I used a simple conduit wall clip as a holder...
Nice to get it off my lift for a while!!!
