Concrete imperfections

[macguy787]

http://picpaste.com/IMG00037-20100906-1231.jpg

Hi all, I looked at my garage in my new home and there's some spots of imperfection where the slab meets the footing or sidewalls such as the one shown above.

Should I use liquid level to fix this? What other products are recommended? The concrete imperfections vary in size. Could I just epoxy over this?

As well, what would be the best way to smooth out the sidewalls, if I were to epoxy them as well? Should I rent a grinder and do it by hand?

Thanks in advance,

 

[LegacyIndustrial]

You can use a viscous epoxy paste to smooth it over.
Anything cementitious will likely crack or pop out.

 

[macguy787]

Thanks for the reply. Couldn't I just use something like this?

http://www.homedepot.ca/webapp/wcs/...artial&Ntx=mode+matchall&N=0&Ntk=P_PartNumber

 

[LegacyIndustrial]

Mac, you can use what you want (sounds like something John Wayne would say).
We provide materials that are used in industrial settings.

If it's foot traffic, go for it. If it's heavier traffic or a joint/transitional area that material will eventually pop.

Our products will flex if the area moves or if heavy traffic is applied.