Concrete sealing.

[FreedomPenguin]

This isnt a garage floor, but my residential is having us replace our curbs. I paid 2k and its getting done this week, when its ready i'd like to pour concrete sealer on the curb and driveway.

What is the curing time before I can throw sealer and what would you guys recommend, can I just use a sprayer and spray it on? how often.
Looking for recommendations. I have a ryobi battery chemical sprayer id like to use.

 

[LegacyIndustrial]

Most breathable sealers can be applied as soon as you can walk on it. Densifiers, Silax-Seal, etc...


Sent from my iPhone using Tapatalk

 

[Garage Flooring]

This isnt a garage floor, but my residential is having us replace our curbs. I paid 2k and its getting done this week, when its ready i'd like to pour concrete sealer on the curb and driveway.

What is the curing time before I can throw sealer and what would you guys recommend, can I just use a sprayer and spray it on? how often.
Looking for recommendations. I have a ryobi battery chemical sprayer id like to use.

Basic protection TL39 https://www.garageflooringllc.com/concrete-densifier/ . Densifier & sealer in one.

Better Protection TL37 (same link) and TL021 https://www.garageflooringllc.com/tl021-penetrating-sealer-dust-proofing-concrete/ (note dilution instructions)

Best protection for Driveway would be TL37 followed by Ghostshield 8505 or 8510. Better at repelling oil https://www.garageflooringllc.com/siloxa-tek-8505-concrete-sealer/

 

[Mickk59]

In reference to the TL37 and TL21 following up with Ghostshield 8510.
How long does new concrete flooring have to cure before applying?

Also Ghostshield 8510 states it repels water as well.
Is the TL37 and TL21 needed?

 

[Garage Flooring]

In reference to the TL37 and TL21 following up with Ghostshield 8510.
How long does new concrete flooring have to cure before applying?

Also Ghostshield 8510 states it repels water as well.
Is the TL37 and TL21 needed?

You would not do the TL21 and the 8510. It would be one or the other. We suggest waiting 30 days prior to applying. We do not normally dilute densifier and it will say do not dilute, but for this application, we would dilute 50% (the TL37)