Connectors for ABS Harness

[u118224]

I'm going to replace a bad ABS harness. It's on the left front of a Buick and the ABS harness hard wires into a larger harness. What kind of wire connectors do the auto techs on here recommend be used?

 

[theoldwizard1]

LMGTFY

 

[Jeeper]

What year and model? There was a tsb that I did for an 04 Grand Prix that makes me wonder if yours has the same issue but need more info.

 

[u118224]

I have to replace the hub and the harness, the harness and connector were somehow ripped off. 2001 Century.

 

[Fireball027]

I usually use heat shrink **** connectors (pink ones). Cut the wire part way up the harness, cut the new one to length and crimp and seal.

 

[Jeeper]

Is this what you need?

http://www.amazon.com/dp/B002XYT2HI/?tag=atomicindus08-20

 

[Fireball027]

I figured by his question he already had the harness and just wanted opinion's on how to connect the 2.. But like normal, I could be wrong.

 

[YupIllFixItLater]

I would use Deutsch, Weather-pack, Metri-pack or similar to keep the connection from corroding. One of those with die-electric grease should be good.

 

[u118224]

Thanks for the responses, I appreciate it. To confirm, I have the harness but am looking for weatherproof connectors. I'll check out the Deutch's and the heat shrink **** connectors.

 

[thegroundpounder99]

I use a non insulated barrel crimp w/ a solder sleeve and heat shrink

 

[aussiek2000]

I use a non insulated barrel crimp w/ a solder sleeve and heat shrink

+1 to barrel crimp, solder, heat shrink, tape, split loom, tape.

 

[dave89iroc]

Use good heat shrink, the kind with glue in it

 

[u118224]

Thanks again for all the responses, here's what I'm going to get. I thought I'd share since I assumed something like this existed but could never find it.

http://www.amazon.com/gp/product/B00CPSY9OI/?tag=atomicindus08-20

 

[454ragtop]

Thanks again for all the responses, here's what I'm going to get. I thought I'd share since I assumed something like this existed but could never find it.

http://www.amazon.com/gp/product/B00CPSY9OI/?tag=atomicindus08-20

Could be wrong, but I don't think that's what you want. Those are to repair a connector, not to splice wires together. I'd use something like this http://www.amazon.com/dp/B000NI5C52/?tag=atomicindus08-20 if you are splicing wires.
HTH, Jim

 

[devoncoolman]

Dorman makes the harness kit. I normally use uninsulated bare **** connectors and heat shrink.

 

[u118224]

Thanks 454Ragtop, that is a better solution. Thanks again to all who helped.