To avoid these ads, REGISTER NOW!

Converting a crawlspace into a basement

rtz

Well-known member
Joined
May 27, 2018
Messages
342
Location
Oklahoma City
Just now starting to look into this. Appears to have been done before from what I have seen online. Converting it from 2' to 8'(or more).

Not concerned about digging it out or the floor. Interested in the walls and supports for the house foundation.

Anyone ever done it before or looked into it?
 
To avoid these ads, REGISTER NOW!

willymakeit

Well-known member
Joined
Apr 27, 2009
Messages
1,254
Location
Springfield Mo.
Years ago. We did it by hand. Typically a certain amount of distance from existing to new horizontal is needed to avoid undermining. Normal footings and a filled block wall.
A lot depends on your soil conditions and types.
Your question is general without many details.
 

StreetGLi

Well-known member
Joined
Jun 29, 2017
Messages
138
Just now starting to look into this. Appears to have been done before from what I have seen online. Converting it from 2' to 8'(or more).

Not concerned about digging it out or the floor. Interested in the walls and supports for the house foundation.

Anyone ever done it before or looked into it?
Its done often where I live. They dig under the foundation and support it with steel I-beams, jack it up, pour footings and typically build block walls. For the house to sit on.

Sent from my LG-H873 using Tapatalk
 

Dagny

Well-known member
Joined
Jul 25, 2014
Messages
3,071
Location
Northern Wi.
My father was a block layer we did two of them as I remember we used cribs made from basswood 8x8s
 

ozyborn

Well-known member
Joined
Apr 26, 2011
Messages
689
Tons of digging. Hope you love moving buckets upon buckets of dirt. Enough that I tossed the idea of a deeper basement into the wind.
 
To avoid these ads, REGISTER NOW!

58Yeoman

Well-known member
Joined
Oct 1, 2010
Messages
8,998
Location
Central IL
In my previous life, my 'across-the-alley' neighbor did it to his house. Small ranch with a crawl space. He dug it out by hand in clay soil, with a conveyor belt going out one crawl space window. I offered to help him, but he wanted to do it himself. He left a couple feet all around his 'foundation' and covered the ledge in concrete, then the floor. Seemed like an awful lot of work for a little space.
 

MTY

Active member
Joined
Oct 10, 2017
Messages
31
I have seen this done several ways.

Lift the house and frame between the old foundation and house.

Dig a hole using a conveyor or bucket to remove the dirt. Lift house and pour.

Lift the house and remove the foundation.

As i type, my house is in the air 10'. New 9' walls are poured. One side was daylighted and a skid steer and mini ex were used to excavate.

The house was free and will be remodeled to the studs once I set it down. At set down I will be at $14 per square foot. Then the money drain begins. I expect to finish below $70 per square foot.
 
To avoid these ads, REGISTER NOW!
Top Bottom