Cordless screwdriver for women

[Farmall450]

The other GJ way is to say I can buy 10 drills at the local pawn shop, take my cousin on a date and have money leftover for a used pair of boots for that kinda coin!

But seriously, she didn’t mention budget, so I gave my top three for the task and provided my reasons and preferences. And she did say this was for assembling cabinets (not hanging, which requires less finesse and more oomph). Even if it wasn’t in budget, it gives her another option to look at and compare against the other options.

If she's assembling them I'd assume also hanging? Maybe they're free standing...

Perhaps not, but that further moves the case that a $300, pro use tool is probably not the one. IK, it's not the GJ way, but we've gotta be realistic once in a while here

It generally doesn't make sense to suggest extreme woodworker brand tools for one specific job (that isn't building the cabinets from raw material or erecting a timber frame) similar to how I wouldn't recommend Snap-on to someone looking to do a tuneup on their lawnmower once a year.

 

[RKA]

It may not be an issue with a single task, she clearly articulated an issue with ergonomics that she’s trying to solve. To me that indicates she’s tired of the big honkin drill that is completely unnecessary for household tasks. We are just presenting options.

And I completely disagree with your snap on comparison. The ergonomics when using a tool for repetitive tasks matters to some people. If you’ve tried A and found it falls short, isn’t it time to explore other options? What difference does it make if the brand is marketed to pros or woodworkers. If it meets your needs within your budget, that’s all that matters.

 

[Davefr]

Not to fight the typical GJ way, but isn't a $300 recommendation a bit crazy for a DIYer hanging a set of cabinets

No crazier then buying a $100 SO ratchet when a $10 HF one will do the job.

The OP implied lightweight/ergonomic were important considerations and there is no better cordless drill candidate then the CXS for the discriminating user.

Like a lot of tools, it's probably overkill for the occasional DIY'er but for those that want to seek out the best performance with price as a secondary consideration, it's a great choice.

I use mine all the time but if it was only a couple times per year then the M12 would suffice.

I always try to seek out the most ergonomic tool for repetitive tasks. I only have one body and RMD/RSI can be a serious issue.

This is also GJ where "tool overkill reigns supreme!" I think the OP rec'd some great options from the GJ crowd. She can weigh the options and decide based on her own priorities.

 

[thooks]

Not to fight the typical GJ way, but isn't a $300 recommendation a bit crazy for a DIYer hanging a set of cabinets

Not if it works, makes her job easier and more productive.

 

[HondaCBMan]

Not to fight the typical GJ way, but isn't a $300 recommendation a bit crazy for a DIYer hanging a set of cabinets

I don't think $300 alone is the issue. It's recommending a power tool without an ecosystem. At least with the Milwaukee, Dewalts, Makitas, Bosch, etc the battery can be used in various devices in the line. You know in case she wants to get another tool down the road.

 

[Farmall450]

I don't think $300 alone is the issue. It's recommending a power tool without an ecosystem. At least with the Milwaukee, Dewalts, Makitas, Bosch, etc the battery can be used in various devices in the line. You know in case she wants to get another tool down the road.

Exactly. You aren't building onto Festool unless you want a really nice tracksaw

Typical lunacy.

 

[Farmall450]

No crazier then buying a $100 SO ratchet when a $10 HF one will do the job.

That's the exact analogy I also referenced as bizarre.

 

[PR1Gneon]

Craftsman 8V Max

Great power with impact and the battery last a lot.











Sent from my SM-J337A using Tapatalk

 

[RKA]

Foodie, I just got an email. Amazon put the flexiclick on sale today for $117. That’s a fantastic price and if you want it, get it early, it may not last through the day.

https://smile.amazon.com/Bosch-Power-Tools-Combo-GSR12V-140FCB22/dp/B074GYX6XG?ref=dotd_lm&ref_=pe_837390_437499180

 

[foodie]

Foodie, I just got an email. Amazon put the flexiclick on sale today for $117. That’s a fantastic price and if you want it, get it early, it may not last through the day.

https://smile.amazon.com/Bosch-Power-Tools-Combo-GSR12V-140FCB22/dp/B074GYX6XG?ref=dotd_lm&ref_=pe_837390_437499180

Thanks RKA!,...I am going to check that out at the store and see how it feels before I purchase it. That is a great deal! That is sweet, I just watched the video. Does that take normal hex bits for the screwdriver attachment?

 

[foodie]

RKA,...I just ordered it, could not pass up the deal. I will see how it fits my hand, if not I could always return it. Thanks again for thinking of me and the notification, have a great day!
I am still going to check out the Dewalt one at Lowes to see which one of the two I like better. But I love all the different attachments to this one!

 

[foodie]

To answer some of the questions of others. I won't be hanging the cabinets my friend will. I am just helping to assemble them. My budget would have to be under $300, I am a tool junky. But I also wanted this type of tool for other things also. I was just tired of lugging around the big Dewalt drill for simple tasks.

 

[trekgod3]

Dewalt dcf610

 

[foodie]

Dewalt dcf610

Thanks trek,...yes that was one of the ones recommended to me, I am going to Lowes today to check it out. Thank you.

 

[HondaCBMan]

Thanks trek,...yes that was one of the ones recommended to me, I am going to Lowes today to check it out. Thank you.

FYI The post you quoted is the old version. Not the newer brushless model mentioned earlier in the thread. It makes no sense to get the older model because at Lowes they are the same price.

 

[James-W]

Since you have already ordered the Bosch kit this won't mean too much to you. But I thought I would mention it anyway, just in case for whatever reasons the Bosch kit doesn't work out as well as you had hoped it would. Bosch makes very good tools, I have a Bosch finish nail gun and I love it, so I am fairly certain you will like the Bosch kit.

Anyway, I have this Ridgid tool and it is wonderful.

https://www.homedepot.com/p/RIDGID-...er-with-Belt-Clip-Tool-Only-R86037N/206947575

It isn't the most lightweight tool around, but it isn't all that heavy either. It feels good in my hand and it has more than enough power to drive any size screws you are using, to include 5 inch screws like I used on a deck one time.

 

[LeeG]

This just came (should be in stores today or soon thereafter). Milwaukee M12 Installation Driver 2505. It is basically a copy of the very good Festool CXS, and has attachments for drill chuck, offset driver, 90° driver, and standard bit holder. I played with it at a trade show last week and will be getting one as soon as I see it in the store.

 

[Spacey_G]

FYI The post you quoted is the old version. Not the newer brushless model mentioned earlier in the thread. It makes no sense to get the older model because at Lowes they are the same price.

Correct, they have similar model numbers.

DCF610 - older brushed
DCF601 - newer brushless

 

[foodie]

Correct, they have similar model numbers.

DCF610 - older brushed
DCF601 - newer brushless

Thanks for the information. I just purchased the brushless Dewalt. I will probably keep the Bosch and Dewalt . I like that the Bosch can get into tight spaces. The Dewalt has good balance, not too heavy and has a good grip for the size of my hand. Thanks also Spacey for the info on the Sunex kit from Amazon, I should be getting it in a day or two

Again many thanks to all that responded. You guys are the best and always come to my rescue

 

[Rhodius]

Exactly. You aren't building onto Festool unless you want a really nice tracksaw

Typical lunacy.

I've been reading this forum on and off for the last 2 years, just chiming in here. I found this thread because like OP, I was also looking for a good cordless screwdriver. I have a couple of those 3.6 or 4V brand name Skil or BD, but they just ain't cutting it. Frankly anything under $99 regular or sale price are all similar in terms of their usefulness. I'm looking for the "next" level. You guys/gals are the pros in terms of your experiences, obviously you'd know much more which tool to buy and hence why I'm here. I saw that this Festool comment triggered someone to post about the Milwaukee 2505-20. Isn't that what this forum is for? Not sure about the others, like OP, I don't mind spending necessary money ($200-300) if that's the best tool for the job and at that price (for a home DIYer or hobbyist) is not a single purpose tool. My last cordless drill/driver was about $200 plus range and it lasted me 15 years and it still works, just too heavy.

Back to the topic, that Bosch with the multi-head seemed to be the best screwdriver including the multi-head attachment (hence not single purpose) for the price range. The Milwaukee is nice, but at double the price, it doesn't seem to be worth it. I may still buy other Milwaukee tool, but I don't think it's wise to buy this tool just because I may buy into the system later.

Let me know what you think, thanks again.

 

[CGarage]

Bosch 12V is tops. The Festool is great and, for 12v, I think Bosch is second best. Very refined also. I got a deal at Lowe’s for the drill and impact driver combo. Zero regrets and the drill has huge torque. No issues putting Spax screws into Russian Birch 19mm ply and did it all day.

Edit: No complaints from wife or girlfriend, either.

 

[RKA]

I've been reading this forum on and off for the last 2 years, just chiming in here. I found this thread because like OP, I was also looking for a good cordless screwdriver. I have a couple of those 3.6 or 4V brand name Skil or BD, but they just ain't cutting it. Frankly anything under $99 regular or sale price are all similar in terms of their usefulness. I'm looking for the "next" level. You guys/gals are the pros in terms of your experiences, obviously you'd know much more which tool to buy and hence why I'm here. I saw that this Festool comment triggered someone to post about the Milwaukee 2505-20. Isn't that what this forum is for? Not sure about the others, like OP, I don't mind spending necessary money ($200-300) if that's the best tool for the job and at that price (for a home DIYer or hobbyist) is not a single purpose tool. My last cordless drill/driver was about $200 plus range and it lasted me 15 years and it still works, just too heavy.

Back to the topic, that Bosch with the multi-head seemed to be the best screwdriver including the multi-head attachment (hence not single purpose) for the price range. The Milwaukee is nice, but at double the price, it doesn't seem to be worth it. I may still buy other Milwaukee tool, but I don't think it's wise to buy this tool just because I may buy into the system later.

Let me know what you think, thanks again.

It's a perfectly reasoned and sound approach. And frankly, some Milwaukee tools have disappointed me upon initial release, so buying as soon as a new tool is released is a risk. It's no longer mechanical reliability, it's the buggy electronics you have to be concerned with. I would rather wait 6 months for honest feedback to surface. So a tried and true option may be better than the latest and greatest gadget.

 

[CGarage]

I agree totally with the above. Milwaukee seems to be the market leader for the 18V + LiIon high torque drills and drivers.