Cornwell Har-501

[Rezeppa]

I am in need of verification on a 3/4 Cornwell ratchet. My 3/4 Har-501 I have a repair kit I am not 100% sure if you need a spanner wrench or if there is supposed to be a two Screw on the bottom to take it apart. some clarification would be nice thank you.

 

[redwrench60]

I have one of those and yes it to does take a spanner on the cover plate.

 

[wrenchr]

You might be able to use a small punch and smack it with a hammer.

 

[Rezeppa]

It is a spanner. I welded two 4 1/2" grinder spanner wrenches together to get the right size. I put the ratchet in a vise toughest rebuild kit I've ever installed felt like an idiot. I had every spanner but the right one

 

[bobcatdan]

Huh, I had to lock tite mine because it kept loosening up and even then, I have been able to remove the back pretty easy. Cornwell's are kinda a pain in the **** to rebuild. I had a dealer I normally don't deal with rebuild my long 1/4" and it took him over a half an hour.