Craftsman 1/4" impact sets

[77Ford]

Just waiting on payment from two more users. The rest have been boxed up, labels printed and will go out tomorrow morning before work.

For those still interested at the $14.99 price, the earliest I can get them is Wednesday. That's my next off day from work. If someone else can them at the $12.99 price before Wednesday, snag yourself a set. Otherwise I'll make the trip again and get sets for those interested.

Thanks for the fast shipping ..... Already have a tracking #........ And again thanks for picking these up [emoji39]


Sent from my iPhone using Tapatalk

 

[Spn1025]

Thanks for the fast shipping ..... Already have a tracking #........ And again thanks for picking these up [emoji39]


Sent from my iPhone using Tapatalk

Same here. Thank you!

 

[Ericgst]

I have found many of these sets in Tampa and Brooksville, FL if anyone is looking for them. Tampa had maybe 30-40 various socket sets left on Saturday but Brooksville probably had a couple hundred.

I picked up the 1/4 metric impacts and 1/2 deep chrome.

 

[tjpavlov]

Is there any appetite for more of these? My local store had a few sets that I could try to snag and ship out.

 

[Kaervak]

77Ford
In The Doghouse
Spn1025
az45
jeffyhog
JohnKal
bigboost

Your sets have shipped, they should arrive within a couple days.

 

[kawittwer]

I'm still looking for both sets.

 

[kneeman]

So far anyone that is buying these and shipping them for folks, you can mail the SAE and Metric set in one small padded envelope for 3.44. The ones we have are about 10"x8", but they could go in even smaller ones.

Both sets together weigh 12 ounces when packed in the envelope. These envelopes cost about .25-.30 a piece.

Not a free flat rate box and maybe more work for the nice person selling if they can't find cheap mailers, but if you have access to some small envelopes you could save about 1.50 per order.

 

[BrianJ]

For those still interested at the $14.99 price, the earliest I can get them is Wednesday. That's my next off day from work. If someone else can them at the $12.99 price before Wednesday, snag yourself a set. Otherwise I'll make the trip again and get sets for those interested.

Is there any appetite for more of these? My local store had a few sets that I could try to snag and ship out.

I'd be interested in a both sets.

 

[jeffyhog]

77Ford
In The Doghouse
Spn1025
az45
jeffyhog
JohnKal
bigboost

Your sets have shipped, they should arrive within a couple days.

Thank you very much! I'll keep an eye out for them.

 

[tfedullo]

I'd be okay with the increased price Kaervak, I'm still interested in both sets.

 

[tomd]

I am interested in both sets.
PM me if you have both available.
tom
zip: 53703

 

[tjpavlov]

I just snagged four sets (SAE and Metric) at the Sears outlet with me. The price had been $12.99 but was $14.99 today. Including MA sales tax, shipping and paypal fees, these come to just about $40.

I'm thinking $42 for a complete set just to keep the numbers safe for me (in case paypal or shipping is more costly).

UPDATED: SOLD OUT

 

[MPOWERD]

I managed to get nine sets. The other outlet store has them at $14.99 and won't price match. If no one else can get them at the $12.99 price I'll head back and get the rest that still want them covered.

I got your PM... payment will be sent to you later today and thanks again!

***UPDATE: Payment sent.

 

[skyfli]

I would take a set of each if anyone has some to spare. Let me know! THanks guys!

 

[tjpavlov]

I would take a set of each if anyone has some to spare. Let me know! THanks guys!

PM me your email and shipping address and I can send you a paypal invoice. I'm looking for $42 for both sets.

UPDATE: SOLD OUT

 

[Richard Cranium]

Received my sets yesterday, thanks

 

[ER70S-2]

Does anyone else's 8mm not fit properly on their socket rail? The square hole isn't deep enough on mine, so the socket sits up higher than all the rest. It doesn't really matter, just curious.

 

[stage20]

Does anyone else's 8mm not fit properly on their socket rail? The square hole isn't deep enough on mine, so the socket sits up higher than all the rest. It doesn't really matter, just curious.

i have all drives of craftsman and non of them are like this. i do not have these specific sockets.

some other brand sockets dont fit right side up, so i flip them and have the drive side sticking up. i need to take a drill bit to some sockets or just run a dremel around the plastic peg on the trays.

 

[tjpavlov]

2 of 4 sets sold. Invoices sent out.

I have two more sets (SAE and Metric). $42 for both shipped. As noted above, they were slightly more expensive at my local Sears Outlet.

UPDATE: SOLD OUT

 

[kawittwer]

2 of 4 sets sold. Invoices sent out.

I have two more sets (SAE and Metric). $42 for both shipped. As noted above, they were slightly more expensive at my local Sears Outlet.

TWO SETS LEFT
PM me if you want a set.

Money sent. Thanks a million.

 

[dakotart1984]

Interested in one! Sent PM.

 

[pauls_workshop]

If anyone has any of the metric or sae left they would sell, please send me a pm! thanks - Paul

 

[LB-1911]

If anyone has any of the metric or sae left they would sell, please send me a pm! thanks - Paul

You may want to send a PM...

2 of 4 sets sold. Invoices sent out.

I have two more sets (SAE and Metric). $42 for both shipped. As noted above, they were slightly more expensive at my local Sears Outlet.

TWO SETS LEFT
PM me if you want a set.

Interested in one! Sent PM.

 

[ER70S-2]

i have all drives of craftsman and non of them are like this. i do not have these specific sockets.

Thanks, but the problem would be specific to this set. If anyone else noticed that their 8mm doesn't fit all the way down on their socket rail, please let me know.

 

[tjpavlov]

Well that was fast. Sold all four sets. Payment received on two already. Once I get the last two, I will drop off all at the post office. Going out Priority Mail.

UPDATE: All sets sold and paid for. Everything is going out priority mail in the morning. Paypal should be sending you tracking information.

 

[Richard Cranium]

thank you to every one whom went out and purchased extra sets to sell to Garage Journal Members. This is what it is suppose to be like. Helping each other out...Rich

 

[Sky Chief]

Thanks, but the problem would be specific to this set. If anyone else noticed that their 8mm doesn't fit all the way down on their socket rail, please let me know.

My 8mm fit on one of the plastic Craftsman rails with no problem.

 

[Spn1025]

Got the sockets. Thanks man ~

 

[Kaervak]

The last two people I got sets for, they'll be shipped out tomorrow evening. Gotta love long shifts at work.

 

[JohnKal]

Got mine today.

Thank you Kaervak, we all appreciate the effort.

 

[In The Doghouse]

Received mine today. Thank you Kaervak!

 

[dakotart1984]

Its karma! I helped out a bunch of Gj'ers last year when Menards was cleaning out their gearwrench inventory. Its nice that there's others here as well! .. Is it too early to be thinking about the secret Santa??

 

[Loscaldazar]

I'm going to check my local sears outlet tomorrow if others are still interested getting some of these? No guarantee they are there though.

 

[stage20]

i went in to my local sears service center to look for these sockets only to find they are closing at the end of the year. all the tools are pretty much gone except some dewalt ratcheting wrenches. nowhere to buy lawn and garden or appliance parts local now.
bleh.

 

[BrianJ]

thank you to every one whom went out and purchased extra sets to sell to Garage Journal Members. This is what it is suppose to be like. Helping each other out...Rich

Ditto. Great community!

 

[MPOWERD]

The last two people I got sets for, they'll be shipped out tomorrow evening. Gotta love long shifts at work.

Thanks for the update! Don't sweat it if you need to take a day or two extra to catch up on your Zzzz'ss!

 

[MPOWERD]

thank you to every one whom went out and purchased extra sets to sell to Garage Journal Members. This is what it is suppose to be like. Helping each other out...Rich

Absolutely awesome community here!

 

[jeffyhog]

Received my sets today as well. Thank you Kaervak for your effort- it is much appreciated!

 

[77Ford]

Received my sets today as well. Thank you Kaervak for your effort- it is much appreciated!

Yes Thank you again......Kaervak. Got mine today

 

[Loscaldazar]

Local outlet does have them. They are more expensive than the $12.99 elsewhere. I can do $26 shipped for one, or $42 shipped for both. Anyone interested? I'll make a run tomorrow (or tonight) if so.