Updated Price $150 pickup or shipped withing the continental US. Outside of that buyer to pay actual shipping.
Hey Folks,
This may be my first post on this site but I am an active member over on the HAMB.
Way back when I was a Fleet Diesel Tech for a beverage distributor and have a 3/4 drive ratchet and socket set that I have not touched in probably 10-15 years. The tools are just taking up space and I could use a couple bucks for my Model A project.
If the pic looks familiar, yes I did have it up on "that" auction site but it didnt sell. I shoulda posted here first but didnt even think about it.
This lot includes 3/4" drive Ratchet, 16 sockets ranging from 7/8 thru 2 inch, 5 and 8 inch 3/4" extensions.
Everything is in good shape but as you can imagine there is some scuffing, couple nicks here or there, some chipped up chrome plating there on the sockets. It looks like a couple were used on an impact gun but still fit nice and snug on the ratchet. I gave them a quick wipe down but one or two still have some grease in them, nothing that wouldnt clean up if you wanted to. The Ratchet is missing the little thumb level to change direction of the ratchet. This just screws one so it's not a big deal you just need to run down to your local SEARS tools to pick one up, you can use a pair of pliers in the meantime to switch it.
All sockets are 12pt and of the Deep variety except were noted. Sizes of the sockets are as follows.
7/8, 15/16 These are the shallow style
1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-15/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-3/4, 1-13/16, 1-7/8, 2
Thanks for looking and if you have any questions or offers please PM me. I preferr Paypal for payment but will also take a Money Order.
Thanks
TBone
Hey Folks,
This may be my first post on this site but I am an active member over on the HAMB.
Way back when I was a Fleet Diesel Tech for a beverage distributor and have a 3/4 drive ratchet and socket set that I have not touched in probably 10-15 years. The tools are just taking up space and I could use a couple bucks for my Model A project.
If the pic looks familiar, yes I did have it up on "that" auction site but it didnt sell. I shoulda posted here first but didnt even think about it.
This lot includes 3/4" drive Ratchet, 16 sockets ranging from 7/8 thru 2 inch, 5 and 8 inch 3/4" extensions.
Everything is in good shape but as you can imagine there is some scuffing, couple nicks here or there, some chipped up chrome plating there on the sockets. It looks like a couple were used on an impact gun but still fit nice and snug on the ratchet. I gave them a quick wipe down but one or two still have some grease in them, nothing that wouldnt clean up if you wanted to. The Ratchet is missing the little thumb level to change direction of the ratchet. This just screws one so it's not a big deal you just need to run down to your local SEARS tools to pick one up, you can use a pair of pliers in the meantime to switch it.
All sockets are 12pt and of the Deep variety except were noted. Sizes of the sockets are as follows.
7/8, 15/16 These are the shallow style
1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-15/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-3/4, 1-13/16, 1-7/8, 2
Thanks for looking and if you have any questions or offers please PM me. I preferr Paypal for payment but will also take a Money Order.
Thanks
TBone
Attachments
Last edited: