Craftsman Bolt Out 6PC and 5PC - $9.99 each

[EdJack]

Sears Craftsman Bolt Out sets, both the 6PC and the 5PC, $9.99 each.

Made in USA.

If you don't have these already, they are back on sale. They are also not Hot Deals, so you can get creative with coupon codes.

Given the latest rounds of Craftsman going to China, it might be a good idea to get these if you don't have them yet. I think eventually everything Craftsman will be made in China.

So get them while they are still made in the good ole' U. S. of A.

6 Piece Set:
http://www.sears.com/craftsman-bolt-out-6-pc-damaged-bolt-nut-remover/p-00952060000P?sellerId=SEARS

5 Piece add on Set:
http://www.sears.com/craftsman-bolt-out-5-pc-damaged-bolt-nut-remover/p-00952061000P?sellerId=SEARS

 

[Mastermind]

Is this online only or in-store too?

 

[panknuckshovel]

Is this online only or in-store too?

Should be both. If it isn't marked down on the shelf use one of the computers they have on the floor to show them the price.

 

[rednotch]

Is this online only or in-store too?

it shows up under deals at all my local stores when you search the local ads so I assume its good in store also.

 

[morgantm]

Sweet I've been wanting to complete my set of these. Thanks for posting!

 

[aroslv]

I used my points on the craftsman flare wrench deal few days ago.

Lately I only purchase from sears if I have points. However made an exception here, seems like a good deal for $20 and nice to know they are in the toolbox if ever needed.

 

[SweetD]

Picked up both sets, definitely one of those "right tool for the job" sets to have in the box. Thanks OP!



Dave

 

[LXCam]

My local only had the five piece, darn the bad luck

 

[olytdi]

THanks OP, picked up both.

 

[impactsocket]

Do these tools work?

 

[Buckgnarly]

Do these tools work?

Yes, hell yes! You just have to hammer them on before using.

 

[Marc Benjamin]

I've seen those but never really bothered because I figured I could just drive by Sears and get the set that day the vise grip method fails and I really needed one of these.

Till now, the lowest I've seen them was at $14.99 for the base set.

Picked up the two sets with some points. Thanks.

 

[whyNick?]

Picked up a set, thanks OP.

 

[Nessal]

Just picked up a set at stoneridge mall they got one of each left. Funny thing is that i never had a need for these....bought them anyways.

 

[xbeatles4x]

How does this compare to the shallow set in terms of usefulness? I currently have the shallow set and never really used them.

This is the shallow set.
http://www.sears.com/craftsman-10-pc-damaged-bolt-nut-remover-set-low/p-00952166000P

 

[bobbycos]

Gonna get me a set tomorrow morning.

 

[stage20]

Should be both. If it isn't marked down on the shelf use one of the computers they have on the floor to show them the price.

does not work in my local store. must purchase online and pick up in store if the online price is different that local store price.

sears and sears holdings. i have been told its 2 diff divisions by the manager.

pretty stupid. why sears is failing.

i picked up both sets. its convenient that one set comes with a case that the other stuff will fit in.
score.

 

[Nessal]

I bought mine in store and the price was the same as online prices.

 

[timmyisme22]

does not work in my local store. must purchase online and pick up in store if the online price is different that local store price.

sears and sears holdings. i have been told its 2 diff divisions by the manager.

pretty stupid. why sears is failing.

i picked up both sets. its convenient that one set comes with a case that the other stuff will fit in.
score.

Was it a hometown store? If so, they're the outlets... franchises really.

Otherwise, all main FLS (full line stores) are apart of Sears holding (aka: Sears). Manager was pulling your leg.

 

[skulldrinker]

Good deal but I already have my Irwins.

 

[JAKE-THE-TOOL-MAN]

does not work in my local store. must purchase online and pick up in store if the online price is different that local store price.

sears and sears holdings. i have been told its 2 diff divisions by the manager.

pretty stupid. why sears is failing.

i picked up both sets. its convenient that one set comes with a case that the other stuff will fit in.
score.

I bought the 5 piece online for the sale price and picked the 6 piece up in store today. It was marked 19.99 on the shelf and rang up for the sale price. Sounds like your store has bad management

 

[stage20]

Was it a hometown store? If so, they're the outlets... franchises really.

Otherwise, all main FLS (full line stores) are apart of Sears holding (aka: Sears). Manager was pulling your leg.

Full store in mall with auto center. This has happened several times. The latest was a special on an oil filter wrench. Guy sid he could not change the price and even offered to let me use his phone to order it online since I gave him a bogus excuse I didn't have internet. Told him if he couldn't match it I wasn't going to buy it online just to prove a point. Stubborn me and my ways. I order everything online and pick up in store now.

 

[SweetD]

Funny thing is that i never had a need for these....bought them anyways.

Like I said, it's one of those things that the one time you need it, now you'll have it!



Dave

 

[MattVette89]

Picked them up tonight. Was not marked on the shelf as the sale price, but rang up correctly. Had to go to the store a little farther away because my nearest store did not have them in stock (used the internet inventory checker).

 

[XxToolAholicxX]

Got them to complete my set. It was the last one at my local Sears.
--------------------------------------------------------------------------------------------------------------
I am a ToolAholic,Sometimes I regret it,Especially when the Toolman wont give me no credit

 

[mikeselky85]

not on sale anymore...just got back from sears

 

[bobbycos]

not on sale anymore...just got back from sears

my Sears was the same but said they will price match if i can bring it up

my F****** phone decided to freak out and try and download Facebook, I do not do facebook and never have. I must learn to control my temper, my ZTE Flash smartphone is now in about 20 pieces

 

[SweetD]

Got my set today, ordered both. Look really nice. Glad to have them in the tool box!

Dave

 

[Certified Drunk]

Must be online only, cause they have nothing in the store anymore.

 

[stage20]

my Sears was the same but said they will price match if i can bring it up

my F****** phone decided to freak out and try and download Facebook, I do not do facebook and never have. I must learn to control my temper, my ZTE Flash smartphone is now in about 20 pieces

Would have been easier just to finish the download..

 

[Markapuu]

Stopped by Kmart (or as my 3 year old calls it... "K-Wal-Mart") to kill some time. Got the last one. Of course it's not something that I imminently need, but I'm sure I'll be glad to have it when the time comes.

 

[bobbycos]

Stopped by Kmart (or as my 3 year old calls it... "K-Wal-Mart") to kill some time. Got the last one. Of course it's not something that I imminently need, but I'm sure I'll be glad to have it when the time comes.

is it back on sale ????

 

[Markapuu]

is it back on sale ????

When I go to the website, it comes up as "on sale" for $19.98 (regular price.... $19.99...). Might try some other locations tomorrow to see what they're going for.

 

[Markapuu]

Picked up Model # 52061 for $14 to complete the set, same store as above. Online it's priced at $19.99.

 

[azzido]

Deal is back #52060 and #52061 are $9.99 each.

 

[Nessal]

I got these a while ago from this deal thinking that I will never use them. Come to find out it saved my *** a few months ago when I was doing a supercharger install. One of the Phillips screw was stripped out. I hammered these on and it came out perfectly. Already paid for itself.

 

[Toolfool]

Just ordered both sets from Sears , $9.99 and $9.49. Money left on my $25 gift card.

 

[mister_two]

I have these bolt outs, what is the purpose of the round/cylinder rod? it doesn't/can't attach to any of the bolt out sockets. What's the purpose??

 

[LB-1911]

I have these bolt outs, what is the purpose of the round/cylinder rod? it doesn't/can't attach to any of the bolt out sockets. What's the purpose??

Use it to knock the bolt out of the socket.

 

[mister_two]

Thanks, of course !! The one time I tried to use them it didn't work for me so I never made it to that step where I needed to knock out the offending bolt. It was a stripped 10mm at an awkward spot. I tried these bolt out but it didn't/couldn't grab tight enough to work. As I recall what finally worked was moving to a smaller SAE size and bang the socket in to "bite".