Craftsman Club April
- Thread starter r0meyrome
- Start date
Stuey
Well-known member
I saw it yesterday, or was it Saturday? Anyways, it looks like there are a few good deals, but nothing unexpected or out of the ordinary.
Fedwrench
ALLIANCE MEMBER
Thanks for sharing, The flare crowfoot set seems like a decent deal if you need them.
kythri
Well-known member
They finally post the flier, but there's nothing super-awesome in there this time... 
The Pro line wrenches are in there for $25/set, always a good deal.
The Pro line wrenches are in there for $25/set, always a good deal.
chappys4life
Well-known member
- Joined
- Apr 30, 2008
- Messages
- 421
link did not work for me
Vinko
Well-known member
I see the DieHard Portable Wheeled Battery Charger/Engine Charger for 6v/12v at $139.
I've been looking for a used one on CL but this might fill the ticket.
I've been looking for a used one on CL but this might fill the ticket.
mkdive
Well-known member
like a couple others said this flier was a let down, this is one of the first fliers that I actually don't even want anything that is on sale! Maybe that is a good thing for a change.
BigK600
Well-known member
I'd pick up one of those 1/2" Impact Wrenchs but my brand new compressor keeps tripping the breaker It ***** renting
It ***** renting kythri
Well-known member
BigK600: Do you have anything else on that circuit?
I'm re-wiring my shop this summer, but I was having the same issue, until I was able to move the compressor to an unused circuit on the other side of my shop.
It's only a 110V compressor, but it ***** just about everything out of that one breaker.
I'm re-wiring my shop this summer, but I was having the same issue, until I was able to move the compressor to an unused circuit on the other side of my shop.
It's only a 110V compressor, but it ***** just about everything out of that one breaker.
I will probably get the external torx sockets just because they are half off ($20). Just an fyi also those tamper proof torx socket drivers are made by SK. You can tell that the chrome is shinier and by the dot on the socket. Those are half off also.
Scooterfish
Well-known member
Looking at the external torx as well. Are there different dates for different items on sale?
Specking of the dots I bought the 4pc 3/8 wobble ext. during the sale then 1/2 off. $30 got them for $12.50. They have the dots and shiner chrome, are they SK as well?
Specking of the dots I bought the 4pc 3/8 wobble ext. during the sale then 1/2 off. $30 got them for $12.50. They have the dots and shiner chrome, are they SK as well?
sjt78
Well-known member
I also bought that set and they do not look like the rest of my CMan pieces, I'd guess they are SK. Can anyone confirm?
MAD
Well-known member
Yes, the current wobble extensions, polished pro flare nut wrenches, flare nut crow foot wrenches, security torx bit sockets, long ball end hex bit sockets, and thumb wheel ratchets are all made by SK. There may by others as well.
Last edited:
MAD
Well-known member
I forgot the 9/16 sparkplug socket is also SK.
http://www.sears.com/shc/s/p_10153_12605_00930610000P?vName=Tools&keyword=9/16+spark+plug+socket
http://www.sears.com/shc/s/p_10153_12605_00930610000P?vName=Tools&keyword=9/16+spark+plug+socket
Scooterfish
Well-known member
Thought so, thanks MAD
FuriousGeorge
Well-known member
The set of all sockets is on sale. That doesn't seem to be one they advertise too often. I seem to remember that the sale price was about what the regular price was last year, however.
Yeah, I bought that SK-made wobble ext kit for my BIL. Paid $15, while I paid $70 for my 6-pc SK set a while back. Oh well.
Anything with a dot is SK, and for stuff a few years older there is another designation but I forgot. "W" maybe? The main giveaway is the better looking chrome.
Anything with a dot is SK, and for stuff a few years older there is another designation but I forgot. "W" maybe? The main giveaway is the better looking chrome.
peter_x
Well-known member
Do those crow foot wrenches have surface drive? It doesn't look like it.
bowlofturtle
Well-known member
hows the price on the flare wrench? i might have to do brake lines this summer...
wantedabiggergarage
Member Emeritus
Stupid question, anyone know if any of the other yard (hand) tools are on sale, other then the three in the picture? I need a manual edger for a project, and mine broke a few years ago, and I haven't found any at garage sales.
Thanks
Thanks
66HertzClone
ALLIANCE MEMBER
That link brings me to a blank page. When I log in at the web site the flyer that shows up is from March. 
Bustawrench
Well-known member
loubapache
Well-known member
Is there a picture to show this "dot"? Thanks.
MAD
Well-known member
The flare nut wrenches have a small "K" mark stamped on them. The old SK made polished Craftsman combination wrenches had the same mark. I believe the mark is right after the word "Professional" (if I remember correctly).
Scooterfish
Well-known member
On the female end of the wobble extensions it is has a dot in front of 3/8
bostonae22
Active member
- Joined
- Dec 1, 2008
- Messages
- 32
chappys4life
Well-known member
- Joined
- Apr 30, 2008
- Messages
- 421
**** just bought that torx set and now its half off.
Scooterfish
Well-known member
chappy, what did you pay for the tamper torx? The Club add shows full price at $40 and my last years catalog shows full price at $30 club sale is $20
price protection policy, thirty days
Vinko
Well-known member
What specs for the manual edger? Hand held? If so, Harry Epstein has some Bahco on sale. I have a cheap that works okay, else I'd have gotten one. Got some Bahco rose pruners though
Yes, I looked last night. It almost looks like an "X" but it is "K". I got the crowfoot flare nut wrenches finally delivered to Sears yesterday after I bought them last month half off (no way I'd pay $80 for those). They also have the K. I would think it would be a dot.
On a side note I had to exchange the set right away. There was a huge chip of chrome lost on the 18mm. Pretty disappointing, luckily they had another set to give me.
Titus
Well-known member
Bump for the beginning of Craftsman Club week.
duke5572
Well-known member
My scores:
6 pc. 1/2" metric deep-well socket set, $49.99, CClub $29.99
Reasonable deal. Needed to fill up the Hansen tray, and these are the most commonly used sizes.
5 pc. Chisel set, $34.99, CClub $19.99
Waited for these to come down for a while. Needed a decent set at a decent price. Disappointed to see 6 pc. set in new Sears catalog for $29.99---with tool pouch.
Total savings ~$35.
Not bad. As stated before, another Craftsman Club flyer with not a whole lot to get excited about.
Best of luck to others.
6 pc. 1/2" metric deep-well socket set, $49.99, CClub $29.99
Reasonable deal. Needed to fill up the Hansen tray, and these are the most commonly used sizes.
5 pc. Chisel set, $34.99, CClub $19.99
Waited for these to come down for a while. Needed a decent set at a decent price. Disappointed to see 6 pc. set in new Sears catalog for $29.99---with tool pouch.
Total savings ~$35.
Not bad. As stated before, another Craftsman Club flyer with not a whole lot to get excited about.
Best of luck to others.
BDBLK2K3
Well-known member
I'm new to the CC Club , registered and have my number .
Where do I put my CC Club number in to get the discount ?
Where do I put my CC Club number in to get the discount ?
Fedwrench
ALLIANCE MEMBER
Update your user profile at Sears.com
wantedabiggergarage
Member Emeritus
Getting ready to leave for work. Yesterday morning, I did an errand for my dad (still fighting some of the hospital aquired junk), came back and saw a CL post. My work schedule, means I almost never get to what I want (gone before I am off work). I called the guy in the afternoon, was going to give him my number, since I am off Tuesday, and he asked where I was. He brought me the compressor for $10 extra.
Now instead of the cheap Craftsman one I was looking at (club sale), I ended up with a Quincy for $225, that does close to what my big one does (want to move the big one to my brothers farm).
Still have to get one item while the club has it on sale though.
Now instead of the cheap Craftsman one I was looking at (club sale), I ended up with a Quincy for $225, that does close to what my big one does (want to move the big one to my brothers farm).
Still have to get one item while the club has it on sale though.
BigK600
Well-known member
I got my compressor working better now and picked up that IR impact yesterday cant wait to try it out.
mkdive
Well-known member
After getting a new "toy" or tool home, waiting is always the toughest part!
Scooterfish
Well-known member
If anyone knows of a stackable coupon code during Cman days, please post. Thanks
Yea I`m cheap
Yea I`m cheap