Craftsman Tools I'm Looking For

[wildman1]

Craftsman Tools I'm Looking For - REVISED 9/18/09

Hello

After raising four sons, my tool box is missing some items, as many of you will understand

I have compiled a list of the missing items - please see below:

TOOLS I AM LOOKING FOR:

Craftsman Quick Wrench
SAE: 11/32, 1" & Larger
Metric: 9mm, 18mm, 20mm & Larger

Craftsman Double Open End Wrench
Metric: 10mm & 11mm

Craftsman Open End / Socket End
SAE: 11/16

Craftsman 1/4 Drive Sockets
SAE: 6PT Deep 5/32

Metric: 6PT Standard 14mm, 15mm

Craftsman 3/8 Drive Sockets
SAE: 6PT Deep 1/4, 5/16, 15/16, 1
Metric: 6PT Deep 8mm, 11mm, 20mm, 21mm

SAE: 6PT Standard 15/16, 1
Metric: 6PT Standard 19mm, 20mm, 21mm

Ratchet: 3/8 Breaker Bar

Craftsman 1/2 Drive Sockets
SAE: 6PT Deep 7/16, 19/32
Metric: 6PT Deep 9mm, 10mm, 11mm, 20mm

Metric: 6PT Standard 12mm, 13mm, 20mm, 21mm

If you can help me out, please drop me an PM with your shipped price to 44412 (please keep in mind that the four are now in college - my funds are limited!).

By the way, I have LOCKING tool chests now!


Thanks!

George

 

[Bull]

I will see if I have any of the items you need. I will also be PMing you my list of needed sockets once I update it to reflect what I purchased this week.

 

[independentrider]

wow! did they not lose any?

 

[wadd1]

One of my boys lost a ratchet "once" and once only
like my dad taught me if you use another mans tools
you replace it exactly where you found it (wiped clean)
never had a problem since

 

[wildman1]

Hey Guys

This is a classified "want to buy" post, not a commentary

I have recently bought some partial sets and am looking to fill those - my sons did not loose all of the items that I'm looking for. They are not entirely blameless though ......

 

[Bull]

I do have a few of the tools you need, although not as many "spares" as I had hoped. Some I can't part with.

Here is what I have duplicates of:

SAE 13/16 and 7/8 combo wrenches. These are the raised panel design and very nice.

I was not sure of your open end sizing needs...I do have a raised panel double open-end wrench, sizes 11/16x13/16

I have Craftsman nut drivers in 3/16 and 1/2, both excellent condition

And that's all I could find. I can take pics if you are interested.

 

[wildman1]

Bull

Thanks - PM sent

 

[wildman1]

Still looking!

List updated 8/29/09 - Thanks Dave, chrislehr & Rick !

 

[wrenchr]

Commentary is good because it bumps your want list to the top every time.

 

[Rickster]

I have the following available from your list. Can ship it to you for $25. Let me know, Thanks, Rick

Conb Wrenches: 11 mm 12pt, 16 mm 6pt
Dbl open end: 11/16 x 19/32, 17 x 19
Socket heat: 3/8
Nut Driver: 5/16
1/4 dr sockets: 8 mm 6pt deep, 1/4 dr breaker bar
1/2 dr socket: 1 in 6pt shallow

 

[Nealcrenshaw]

Also check on EBAy, you can get craftsmans tools real cheap.

 

[wildman1]

Rick

PM sent - please PM payment details ....

Thanks!

George

 

[wildman1]

Still looking for some Craftsman tools ....

Thanks!

 

[vartz04]

i could hear my dad now

"damn you kids, damn you kids where is my ____"

Ill ask my buddy, he is phasing out his craftsman stuff.

 

[wildman1]

Still looking - Thanks!

 

[wildman1]

Back to page 1 with an updated list

Please let me know if you can help out

Thanks!

 

[Fedwrench]

Craftsman does not make or never has made a 1/4 inch drive shallow or deep 15mm socket or a 5.5mm deep socket.

 

[wildman1]

Craftsman does not make or never has made a 1/4 inch drive shallow or deep 15mm socket or a 5.5mm deep socket.

Thanks for the information - I was unaware of this

 

[franzdom]

I don't believe they made 14mm 1/4" drive sockets, and my 8mm 3/8 drive are different brands too...

 

[nate379]

Yup, and 99.9% of the time it was him that put it somewhere. Famous for working on something, putting all teh tools in a 5 gal pail and then it'd end up in a corner of the garage, basement, shed, etc.

i could hear my dad now

"damn you kids, damn you kids where is my ____"

Ill ask my buddy, he is phasing out his craftsman stuff.

 

[wildman1]

Still Looking!

 

[BackTracker]

I have a 7/16 -3/8 double open end and a 7/16 combo wrench both raised panel c-mans. Although it looks like I can't read and you didn't need those LOL o well.... I also have a 22 23 and 24 and 1-1/8 1/2 in drive if you need any of those.

 

[wildman1]

I REALLY need a 11/16" open end - socket head (Saltus?) wrench, & larger size Quick Wrenches

Since Craftsman apparently did not make them, I am also looking for a Snap-on 1/2" drive 3/8" Deep & 7/16" Deep Sockets

Thanks!

 

[SpiderGearsMan]

clean tools hahahaha
waxed tool box funny
commenting to bttt - priceless