evacovsky
Active member
Hi all I have been working on a Craftsman master =V= series collection and I just can’t seem to find a handful of items. Please PM me if you are willing to part with any of the following or maybe you can point me in the right direction! I’m only interested in the Post WWII until ‘68 era of Craftsman =V= that doesn’t have any part numbers on them... thanks for your help!
1 inch socket-end flex wrench (Saltus)
24MM Combination Wrench
3/4 Combination Speed Wrench (older style)
Battery Wrench (DBE 5/8-9/16 -V-)(ca. Late 40’s)
Whitworth Sockets (1/2in drive, set of 10 w/ case or individually)
-3/16W, 7/16W, 9/16W, 5/8W, 11/16W, 3/4W
•(1/4W, 5/16W, 3/8W, 1/2W FOUND thanks to d42jeep!)
Impact Sockets
-1/2 drive deep well: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8
-1/2 drive swivel: 3/4, 7/8, 15/16, 1
-3/8 drive shallow: 7/16, 1/2, 9/16, 5/8, 11/16
-3/8 drive deep well: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16
-1/2-3/8 impact reducer
Stop Light Switch Socket (does anyone have even just a pic of one of these?!?)
*I’ve never even seen one, but it’s listed as 1/2” drive with an inside height of 1 3/16in and a 6 point socket. It has a cat. num of 44052)
1/4 drive deep 12pt sockets
-3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16
I am open to trades, I have a fair amount of extra =V= stuff to trade, but either one buy or trade.
***FEW MORE ITEMS ADDED***
---These Craftsman sockets I need to complete sets are roughly a decade newer than the other stuff on my list. These are -V- series sockets not -VV- or -G-, and they need to have uppercase M/M's not lowercase mm's and need to have a top knurling. I'm going to try to attach a pic for an example. Anyway the only ones I believe I need are...
•3/8 drive deep 12pt: 18M/M
•3/8 drive shallow 6pt: 11M/M
•1/2 drive shallow 6pt: 11M/M & 22M/M
Example...
1 inch socket-end flex wrench (Saltus)
24MM Combination Wrench
3/4 Combination Speed Wrench (older style)
Battery Wrench (DBE 5/8-9/16 -V-)(ca. Late 40’s)
Whitworth Sockets (1/2in drive, set of 10 w/ case or individually)
-3/16W, 7/16W, 9/16W, 5/8W, 11/16W, 3/4W
•(1/4W, 5/16W, 3/8W, 1/2W FOUND thanks to d42jeep!)
Impact Sockets
-1/2 drive deep well: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8
-1/2 drive swivel: 3/4, 7/8, 15/16, 1
-3/8 drive shallow: 7/16, 1/2, 9/16, 5/8, 11/16
-3/8 drive deep well: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16
-1/2-3/8 impact reducer
Stop Light Switch Socket (does anyone have even just a pic of one of these?!?)
*I’ve never even seen one, but it’s listed as 1/2” drive with an inside height of 1 3/16in and a 6 point socket. It has a cat. num of 44052)
1/4 drive deep 12pt sockets
-3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16
I am open to trades, I have a fair amount of extra =V= stuff to trade, but either one buy or trade.
***FEW MORE ITEMS ADDED***
---These Craftsman sockets I need to complete sets are roughly a decade newer than the other stuff on my list. These are -V- series sockets not -VV- or -G-, and they need to have uppercase M/M's not lowercase mm's and need to have a top knurling. I'm going to try to attach a pic for an example. Anyway the only ones I believe I need are...
•3/8 drive deep 12pt: 18M/M
•3/8 drive shallow 6pt: 11M/M
•1/2 drive shallow 6pt: 11M/M & 22M/M
Example...
Last edited: