Craftsman wall clock

[bucksnort59]

Was $29.** now 9.47
http://www.sears.com/15-inch-vintag...I=/shc/s/15-inch-vintage-clock/p-00935242000P

 

[volpster31]

Thanks...just ordered the last one in my store...I was waiting for one of the saw blade ones to drop to $10 or $15 but I like this one better....thx

 

[71goldss]

Thanks OP! Just ordered for $8.98 otd with a few SYWR points. Will go great on the garage wall with the other metal signs I've been collecting lately!

 

[morgantm]

Thanks...just ordered the last one in my store...I was waiting for one of the saw blade ones to drop to $10 or $15 but I like this one better....thx

I picked up a saw blade one at the local store a few weeks back for $9 so keep watching yours.

 

[Shootingblanks]

Ordered and shipped.

 

[TAG326]

Got one thanks!

 

[dudley123]

woot! good catch, Ordered with my SYWR points as well..

 

[71goldss]

My "under construction" workbench with my new clock that I picked up on the way home from work today. That clock looks much better in person and built heavy and solid!


View attachment 422296

 

[Mr. Roboto]

Bought the 4.5" vise in the other thread, in-store pickup. What the hell....grabbed one of these as well! Since I'm going there anyways....

 

[Digital4n6]

Hands seem difficult to see being red against the red logo. Maybe I could paint the hands blue to stand out a bit.

 

[JohnKal]

In for one....thanks OP

 

[nic6paul]

I bought one for my Dad. Nice deal.

 

[riggs1117]

funny, even this is made in China. Still a good deal

 

[volpster31]

Hands seem difficult to see being red against the red logo. Maybe I could paint the hands blue to stand out a bit.

I was thinking the same thing

 

[kball]

Don't forget their pint glass/coaster sets and shot glass sets on sale for $4.97!

 

[loudog212]

My "under construction" workbench with my new clock that I picked up on the way home from work today. That clock looks much better in person and built heavy and solid!

Fantastic bench. Love what you did with the 4 lower cabinets. Top notch work!!

 

[EdJack]

They show in stock at my local store, might had to go over and take a look.

I like the fact that the clock face is made of metal, instead of plastic.

 

[ezriderga]

Just ordered one with surprise points I got in email today. Total $2.64

 

[4xdog]

I like it, and have one on the way. I have that same logo on my dad's old toolbox.

 

[bshusted]

Picked one up today. Thanks for posting.

 

[cagullett1]

My "under construction" workbench with my new clock that I picked up on the way home from work today. That clock looks much better in person and built heavy and solid!


View attachment 422296

Did you raise the lower cabinets up? I have the same lower cabinet and workbench but never considered taking the wheels off and raising the cabinet up.

 

[71goldss]

Did you raise the lower cabinets up? I have the same lower cabinet and workbench but never considered taking the wheels off and raising the cabinet up.

I used 1" square tubing from HD and ran it under the "front to rear" cross braces on the front of workbench. Used self tapping screws with my Nextec right angle impact to attach the tubing without having to move the workbenches. I used the rear workbench cross braces to hold up the rear of the cabinet. Then ran self tapping screws down through the bottom of the cabinet with the bottom drawer out into the tubing to fasten the cabinet to the tubing. Pretty simple and perfect clearance at the top of the cabinets.

 

[71goldss]

Fantastic bench. Love what you did with the 4 lower cabinets. Top notch work!!

Thanks! It's no "Steevo" workbench, but works great for me and fits the space I have well!

 

[David Paul]

Thanks OP. Picked one up yesterday and it is very nice.

 

[JohnKal]

Thanks OP. Ordered and shipped!

 

[bshusted]

I picked one up on Friday and am going to return it today. After a day, it was off by nearly 10 minutes. As wall art, it looks nice, but not so great as a clock.

 

[jetur]

Picked one up Saturday morning and hung it on the cabinet door tonight. Thanks for the heads up guys.

Sent from somewhere in Colorado

 

[reeseleblanc]

Ordered mine!

 

[reeseleblanc]

Did you raise the lower cabinets up? I have the same lower cabinet and workbench but never considered taking the wheels off and raising the cabinet up.

What workbench is that?

 

[71goldss]

What workbench is that?

Seville workbench from Sam's Club.

BTW, I like that clock so much that I picked up another one over the weekend. Don't really need, but thought it would be nice to have a backup in case I happened to damage the first one some day. Cheap insurance I guess!

 

[cagullett1]

What workbench is that?

Seville workbench from Sam's Club.

BTW, I like that clock so much that I picked up another one over the weekend. Don't really need, but thought it would be nice to have a backup in case I happened to damage the first one some day. Cheap insurance I guess!

It's a pretty nice workbench for the money too. They changed the material they used on the tops about a year and a half ago (used to be maple, not sure what it is now). I picked up the display for $100. I ended up bolting mine to the wall and it is a pretty stout bench now.

 

[nine4gmc]

I picked one up on Friday and am going to return it today. After a day, it was off by nearly 10 minutes. As wall art, it looks nice, but not so great as a clock.

Try a new battery? Mine is still clocking and it's running on a FREE hf battery

 

[CNGsaves]

Thanks OP . . . . ordered one with free shipping along with 4 1/2" professional vise. May even get another one with the free points from that transaction !

 

[bshusted]

Try a new battery? Mine is still clocking and it's running on a FREE hf battery

Yup. Tried a new battery. Same problem.

 

[Motown]

Odreed one for instore pick up. Got an email saying that the one left in stock was MIA. So they shipped one, free shipping. I received it today. The only issue so far, the minute hand was slightly bent and would catch on the othe hands. Had to bend it straight, to stop it from hitting.