To avoid these ads, REGISTER NOW!

Dannmar two post lift

MITCH OLIVEIRA

New member
Joined
Sep 4, 2018
Messages
1
Location
Home
Installed my lift about a year ago. It lifts evenly, but it doesn't lower evenly. The power/post side lowers a little faster. So by the time it reaches the ground the other side is about 4 inches higher. It does reach the ground but it takes a couple more seconds in holding in the release valve.
 
To avoid these ads, REGISTER NOW!

JSK

Well-known member
Joined
Nov 16, 2007
Messages
432
Location
Southern CA
First thing to try. Raise lift until mid-level making sure to park it on the same lock position(s). Then tighten both equalizer cables until each is a little less than guitar string tight. Best to have a load on the lift to make sure as you are tightening the cables it isn't just lifting the carriages off the locks.
 
To avoid these ads, REGISTER NOW!
Top Bottom