DeVillbiss 3HP Compressor questions

[BuddyC01]

Hello,
I just picked up this DeVilbiss compressor. Seems to run very well. I didn't expect it to be so hard to find information on it. Or a manual maybe. If anyone can help along those lines that would be great.

In general, I don't see an adjustment on the air pressure. Any ideas on what pressure it should automatically cut off? I stopped it at 120 on first test. I'm used to the noisy oil less compressors so I'm moving kind of cautiously.

'preciate it!
BC

 

[dchawk81]

Air pressure adjustment for kickoff and kickon are in the switch box. Take the cover off and there should be two screws. One for each setting.

 

[dchawk81]

It might be set to 135psi right now, to answer your actual direct question.

 

[The Cobbler]

a lot of the switches have 1 screw & the differential is preset. the adjustment is going to be in the centre- ish of the switch . either a screw deiver or a nut to adjust it . snap a picture with the cover off
you don't have a regulator to adjust the line pressure

 

[BuddyC01]

Thanks for the replies. I found some instructional videos that also helped. Just being careful since this feels like a lot more than my trusty Bostitch. I wanted something like this for a couple of reasons. More flow and less complaining about noise from my wife and the dogs when I run my current compressor.
This one does have the single screw and I have a regulator to use on the line side.

Thanks!

 

[The Cobbler]

good news!