Dewalt Mag ToughCases

[Stuey]

I'm giving away 5 Dewalt ToughCases over at ToolGuyd. All you've got to do to enter to win is tell me why you want one.

Entries must be made via TG, and you must leave a valid email address so that I can contact you if you win.

Edit: ToughCases come with a 15-pc fasterning bit set.

 

[Teken]

Left you a message as to why I should get a sample box. Much appreciated for the opportunity as well there Sir!

 

[Stuey]

Left you a message as to why I should get a sample box. Much appreciated for the opportunity as well there Sir!

I saw your entry. =)

It's in the wrong Dewalt post, but I'll make a note to count it anyways.

Dewalt's previous ToughCases are pretty good, but the new magnetic ones are styled after Dewalt's tool cases, which are pretty darned indestructable.

 

[lwlobo]

Here's my entry:

I’d love to have a new Dewalt Magnetic ToughCase to hold my screwdiver bits, adapters, and 1/4″ drive sockets. I’m planning to make a custom foam insert to hold the bits and sockets and my new Wera BitRatchet. This case will be perfect for that, and will make an awesome set to keep under the seat on my motorcycle!

Hope I win!

 

[Stuey]

Lot of good responses thus far. Keep 'em coming!

 

[bchee]

Is it my imagination, or was the bit set not originally included?

I thought the original post said it was only the case, and no bits.

Anyway, are you giving away the same one like in the stores (the one you took a picture of)?

 

[Stuey]

Nope, not your imagination. The post was updated a little after it went live, and again just now (a new pic was added).

The prizes will be shipped directly from Dewalt. After the post went life, I asked for clarification, and was told that the prizes would in fact be the 15-pc fastener set with a Dewalt magnetic ToughCase.

I received a standalone ToughCase this afternoon for review, and it's built even better than I thought it would be! When they said it's magnetic, they weren't kidding! I have a few magnetic tool trays and accessories, and this ToughCases holds strong on surfaces the others slide down on.

The attached photo is what the 5 winners will each receive.

 

[Lawson4450]

Left one on there for you I could use one of the these for my hopefully new house im looking at. it needs a major facelift and i need to keep my tools organized and this could helpl

 

[Flathead Youngin']

Professional Entry: Thie kids here in the woodshop are always losing the bits and can't find them! I'm tired of searching high and low for bits that should be "in their place." This box would be great in helping with that......

(see how I used "do it for the kids in there?)

Personal Entry: I would use one to store all of my bits in. I would probably take it to school and let the kids use it because I could use it there, more than here at the house.

(notice how I worked in "do it for the kids" in this one too)



edit: hahahah, you're all srewed, i played the "kid" card.....

 

[Stuey]

Good evening bump!

 

[lbgradwell]

Nope, not your imagination. The post was updated a little after it went live, and again just now (a new pic was added).

I noticed the update now says the case must be shipped to a US address too. Boo.

Luckily, however, I have a US address for such matters, so feel free to select me after all!

 

[GT89mustang]

Posted my entry . Either way im going to have to check them out in the store, I guess home depot would have them?

 

[Stuey]

I noticed the update now says the case must be shipped to a US address too. Boo.

Luckily, however, I have a US address for such matters, so feel free to select me after all!

Sorry about that, but it's sort of a necessity. Some of my self-sponsored giveaways don't have such a clause, it depends on a number of things. Since you have a US address, it's a moot point anyways if you win.

Posted my entry . Either way im going to have to check them out in the store, I guess home depot would have them?

I know that Lowes has already started carrying the 15pc ToughCase combo sets, but I haven't seen the case by itself yet.

 

[never enuf time]

Thanks for the chance to win such a cool organizer . I'll get one if I can ever get a good job, the work I've been doing is only enough to get by. John Austin

 

[DaMaN]

Thanks for the opportunity Stuey!

 

[Stuey]

Thanks for the opportunity Stuey!

You're very welcome. But, bear in mind that the prizes will be provided by Dewalt.

How could I ever say no to the opportunity to share goodies with random readers and friends?!!

(There have been times where I turned down sponsored giveaway offers and will probably have to do so in the future as well.)

 

[Stuey]

There are still a few more days left to enter. Plus, there's also the $50 Woodpeckers Tools gift card giveaway ending tomorrow night.

 

[Stuey]

*bump*

last day for the giveaway!

 

[Teken]

*bump*

last day for the giveaway!

Tell me I won . . .

 

[Stuey]

Tell me I won . . .

Good luck! The odds are pretty good, I think about 1 in 6 right now.

There's a little over 3 hours left to enter!

 

[Flathead Youngin']

I'll PM you a mailing address for me right now....that way you'll have it on your desk first thing!

Good luck! The odds are pretty good, I think about 1 in 6 right now.

There's a little over 3 hours left to enter!

 

[Craftman]

I would love to have this magnetic case from Dewalt It would go very well with my new 14.4 volt Xrp cordles-drill that came with a circular saw and a nice radio!

And also my dad would stop loosing my bits! lol me to but mosly him!

 

[Stuey]

The giveaway is over, and the five winners have been selected and contacted.

I cannot match up emails and names with GJ aliases. Is anyone from here one of the winners?

 

[Teken]

Didn't get a e-mail so gather I wasn't selected . . . Many thanks for the opportunity regardless there Stuey!

 

[Stuey]

Didn't get a e-mail so gather I wasn't selected . . . Many thanks for the opportunity regardless there Stuey!

Sorry about that, and thank you.

In upcoming months there will be more giveaways with more chances to win!

 

[Mickey O]

I won

.

Funny thing, I don't win stuff often, usually because I don't enter or play (lottery, etc.), I entered because I thought it was ironic that my GF recently ran over my regular DeWalt case, while it was open on the floor. Now for even more irony, that last thing I can remember winning was a DeWalt hat and coolie at a hardware show years ago, you had to use DeWalt tools to sink so many screws in an allotted time and cut off pieces of a 2 x 4 to a certain size (without a tape measure).

Thanks Stuey!

 

[Teken]

Congrats, and well done . . .

 

[mooman]

I won

.

Funny thing, I don't win stuff often, usually because I don't enter or play (lottery, etc.), I entered because I thought it was ironic that my GF recently ran over my regular DeWalt case, while it was open on the floor. Now for even more irony, that last thing I can remember winning was a DeWalt hat and coolie at a hardware show years ago, you had to use DeWalt tools to sink so many screws in an allotted time and cut off pieces of a 2 x 4 to a certain size (without a tape measure).

Thanks Stuey!

Ya know it's made in China.......

 

[Teken]

Ya know it's made in China.......

Good, than he can send them my way, COO doesn't bother me!

 

[Stuey]

I won

.

Funny thing, I don't win stuff often, usually because I don't enter or play (lottery, etc.), I entered because I thought it was ironic that my GF recently ran over my regular DeWalt case, while it was open on the floor. Now for even more irony, that last thing I can remember winning was a DeWalt hat and coolie at a hardware show years ago, you had to use DeWalt tools to sink so many screws in an allotted time and cut off pieces of a 2 x 4 to a certain size (without a tape measure).

Thanks Stuey!

You're welcome! Yours was one of the two entries that were not chosen at random, b/c it was a bit amusing. The magnetic ToughCase is build much differently than the original ToughCase/compartmentalized bit case, but it's still great for loose bits and whatnot. I hope you get some good use out of it!

When closed, the new ToughCase feels like it could handle being run over with a car without any sort of damage.

Ya know it's made in China.......

I actually couldn't find COO info for the review sample case I received. It did come with a neat flat refrigerator/toolbox magnet that's made in the USA.

In any case, made in China/Malaysia/etc or not, the new ToughCase is rock solid.

I picked up a new set of Dewalt pilot-point drill bits the other day. They're not made in the USA either, but they're great bits nonetheless.

 

[never enuf time]

Wooohooo I also won, thanks Stuey I will put mine to work as soon as I get it John Austin

 

[Stuey]

Wooohooo I also won, thanks Stuey I will put mine to work as soon as I get it John Austin

Congrats! I hope you enjoy it!

 

[Flathead Youngin']

Checking my work email......wait......wait.....slooooow, i'm uploading some files......oh, dang it! i think i used my work email....let me check my other one.......not in the inbox.......maybe in the spam.........well ****!

i guess i'll break the bad news to the kids that we didn't win and that the world won't help them.......

haha, JK good stuff and good advertising for your blog!

 

[Stuey]

Pst... here's your second chance!

http://www.dewalt.com/promotions/magnetictoughcasesweepstakes.aspx

 

[never enuf time]

Got my toughcase in the mail today, looks like it will work out great carrying small bits & screws into the job.

The magnets are really strong , I thought of a new idea that I could put screws on them when taking locksets or what ever I am taking apart.

It came with 14 bits , 2 drill bits , 3 nut drivers , & a bit holder.

It's black, not yellow like the picture, which is ok with me as it will match my drill cases.

I think 1 reason I am so excited is, the last tools I bought were a set of Cornwell Metric flares from here back in March & before that I don't even know, work is pretty slow in Michigan.

Thanks again Stuey & DeWalt its really nice to have a new tool.

 

[Stuey]

Glad you like it!