Do I need 23mm and 25mm sockets?

[visionguru]

20, 23 and 25 are like bigfoot. You hear about them, see pictures of them, but are not likely to encounter tone on a Tuesday

Yesterday, when I was replacing the lower ball joint of my Honda, I needed a socket for the thread rod of the C-clamp ball joint press I borrowed from AutoZone. It's supposed to be 22mm. However, being a loaner tool, the rod was beaten slightly out of shape: I could fit the box end (12pt) of 22mm wrench, but there was no way to put on a 22mm 6pt socket. 23mm socket saved the day, a little loose but worked great.

Never say never. You don't encounter a bigfoot until you meet one.

 

[Robinson1]

For no more than they cost they are worth having. I've got a complete Granco 1/2 drive set from 10mm-32mm with no skips. Honestly havent used 1/3 of them but I'm not getting rid of the ones I dont use.

Another odd ball size. I've got a finish mower that has 33mm spindle nuts on the blades.