Does anyone make a 16mm deep socket in 1/4" drive?

[tommydog35]

Snapon makes a 1/4" drive 16mm socket, but it's not a deep socket. Does anyone know if any company makes a 16mm deep socket in 1/4" drive?

 

[mike93lx]

https://www.grainger.com/product/WESTWARD-Socket-1-4-in-Drive-Size-10E874

 

[wafrederick]

SK does in shallow

 

[tommydog35]

https://www.grainger.com/product/WESTWARD-Socket-1-4-in-Drive-Size-10E874

Thanks for that. Any European makes?

 

[mike93lx]

Thanks for that. Any European makes?

No idea. I just googled it

 

[KnurledNut]

@tommydog35
Snap-on does have a 16mm deep.
It just happens to say 5/8".


STM20A
https://shop.snapon.com/product/Dee...Point-SAE-5/8"-Flank-Drive-Deep-Socket/STM20A

Bluepoint BLPLS1458
https://shop.snapon.com/product/Dee...t-SAE-5/8"-Deep-Socket-(Blue-Point)/BLPLS1458

 

[DAustin]

I have a Wright 3430 ratchet, it's a 3/8" drive on a 1/4" drive body. If you get one of these, you don't have to look for larger 1/4" drive sockets.

 

[Zewnten]

Proto also makes a 5/8 deep 1/4 drive socket

 

[nbpt100]

Proto also makes a 5/8 deep 1/4 drive socket

I believe it is also an impact. Just for some variety. European brand? I doubt it. They are all use metric but get the 16mm if that is important to you.

https://www.mscdirect.com/product/details/84983659

I frequently use the 5/8 for 16mm and vice versa out of laziness. I do not want to walk to the shed or go down to the basement to get the other one I do not have handy. About a .005 difference. Close enough in most cases.

 

[m6z]

I have a Wright 3430 ratchet, it's a 3/8" drive on a 1/4" drive body. If you get one of these, you don't have to look for larger 1/4" drive sockets.

I've got a couple similar ratchets. Very handy and often the first tool I grab if I'm working on something low torque like a bicycle.

 

[Mhyde52]

Just curious, is the purpose of this socket for a Specific use?