Does anyone make anything like this?

[tommydog35]

Does anyone make anything like this in 15mm 6 point, with a square drive the other end. I stress I want 6 point and not 12 point.

Ideally the longer the better (around 20cm)



https://imgbb.com/

 

[bonneyman]

Nice looking torque multiplier in the pic. You might find one 20 cm long.

 

[Vvmvbb]

Yeah, torque adapters are usually 12pt. And they are not that long.

For those I buy the ones I need from Armstrong.

http://www.armstrongtools.com/catalogsearch/result/?q=torque+adapter

 

[larry_g]

Fairly simple to make. Find the proper box end/ring spanner in the size you want and weld on an old socket to the end to get your square drive.

lg
no neat sig line

 

[woody 73]

Yeah, torque adapters are usually 12pt. And they are not that long.

For those I buy the ones I need from Armstrong.

http://www.armstrongtools.com/catalogsearch/result/?q=torque+adapter

Good luck with that, I do believe Armstrong went the way of the Dodo Bird some time back...

 

[ryan20021982]

Only thing I could think of is using a piece from the cheap serpentine belt tool and adding a 15mm flare crows foot but it's 1/2" drive so that could be tough finding one.

Or use the longer handle from the kit that has 3/8" on it and don't use a ratchet.

Here is the piece
View media item 80770
It's from this kit
https://www.amazon.com/dp/B0014WDKQ4/?tag=atomicindus08-20