Double Box End Wrenches - Made in U.S.A.

[gatlibs]

I'm interested in buying american made double ended box wrenches with one end that is ratcheting and another end that is not; both ends are for the same sized fastener. Will you please share any brand names preferably with links of wrenches meeting these criteria? I prefer 6 points only, but 12 points would be fine. That is the same for with or without an offset or changeable ratcheting mechanism.

I was really excited when I learned about Craftsman Industrial's new ones, but as far as I can tell Craftsman Industrial is dead. I haven't yet researched tool truck brands and am hoping that there is an alternative, but I would buy from a tool truck. The closest things that I have found are open ended like SK, Proto, and old Craftsman Industrial which can still be found on-line.

I am aware that these ratcheting wrenches have a fair amount of strength in their ratcheting ends. I have the SK ratcheting wrenches now, but I still prefer to break the nuts or bolts loose prior to using the ratcheting mechanism. I use a flex handle breaker bar before a ratchet, too. I am also aware that fair tools are made outside of the U.S.A., but I'm disinterested in them.

 

[Tallpilot]

https://store.snapon.com/Flank-Drive-174-High-Performance-Ratcheting-Box-C800690.aspx

 

[Wamsutta]

The Snap-on version is made in Elizabethton Tennessee and about as U.S. as you can get. The've been making wrenches in America since 1920. And with off corner engagement 12-point, you're not going to round off any corners.

 

[Fedwrench]

Sadly, the original manufacturer of those style wrenches, Armstrong is no longer in business. You might be able to find old stock or used Matco Proswing versions. The standard length model is my favorite wrench. Current Matco versions have been upgraded to 90 teeth and spline ends but, are Kabo made in Taiwan.
when it comes to modern fine tooth ratcheting wrenches, there are few US made options.

 

[gatlibs]

I thank you, two. I paid about $20 per wrench for SK's ratcheting ones. I'm not sure that I can find it in myself to pay ~$50 per wrench so that I don't have to walk two wrenches to the nut or bolt.

I'm hoping that the new SK tools to be released sometime soon will be this style. Once the technological idea and process for SK's ratcheting wrench was made, then I'd imagine that it should be pretty easy to use the same broaches et cetera on wrench blanks of other types. I think that it would make sense to expand it's production of lowest arc swing with different types. (I could just be justifying my own desire.)

If I do extend my Snap-On collection past the BJP-1, then I will wait till after this announcement.

Edit. I'll search for Armstrong some more. I had tried to look for this brand before posting on eBay. I didn't have success, but now that I know for sure that Armstrong manufactured them I'll try again.

 

[Eldogg]

I have the Gearwrench sets and love them.

 

[PFSard]

I'm hoping that the new SK tools to be released sometime soon will be this style.

I would contact SK and ask.

 

[Fedwrench]

I'm hoping that the new SK tools to be released sometime soon will be this style.

Many people here have been waiting quite awhile for SK to release new versions of the X Frame ratcheting wrenches, 90 tooth ratchets, or anything else for that matter with no luck.

 

[gatlibs]

I have the Gearwrench sets and love them.

It was my understanding that those sets Gearwrench aren't made in U.S.A. Are they or are old stock available somewhere?

 

[Finky198]

Those snap on xdhrm wrenches are the best wrenches I own and use by a long shot...

 

[Fedwrench]

It was my understanding that those sets Gearwrench aren't made in U.S.A. Are they or are old stock available somewhere?

Gearwrench never offered US Made ratcheting wrenches.

When it comes to modern fine tooth ratcheting wrenches, your best choice will most likely be made in Taiwan.

There are few US made options like SK, some Proto, and some offerings from Snap on but, the wide variety of lengths, shapes, sizes, flex head, etc mostly come from Taiwan. Being from Taiwan doesn't make them a lesser tool in fact, i haven't been disappointed by one yet. The Kabo and infar made wrenches are pretty great.

 

[BFHtime]

I have these wrenches in metric from Snap-On. They came in 2 sets which seem awkward in sizes the way they are mixed up.

I really liked using my friend’s double box end wrenches. So when these came out with the ratcheting end on the other side, I jumped on them. My driver gave me a deal on both sets or they were they already discounted by Snap-On as a promo.

These are great wrenches, they get better bite than some other wrenches, including regular Snap-On combination wrench box ends. Thank the off set is really nice for certain situations. Most times it does not make a difference, but when it does it helps.

You may consider some flex box end wrenches that have reversible ratcheting box ends. I do not have these but would like some that could lock the angle on flex end, and be reversible on one end. And have the strong box end for breaking free on the other end, like a breaker bar with a socket. Many times it is easier to break fasteners free with the box end because of the light weight and one piece vs grabbing the breaker bar and socket and putting them together. Not a big difference in time but it is quicker. I only break out the 2 foot ratchet for big stuff. I think the bulkiness and lack of manueverability of the bigger bars makes these box ratcheting wrenches more of a joy to use.

 

[gatlibs]

That is disappointing that the sets of Gearwrench aren't made in U.S.A. I was a bit excited by that posting. I imagined saving hundreds of dollars.

 

[potato]

not us made but nice

https://www.amazon.com/dp/B01N3LSGO1/?tag=atomicindus08-20

 

[Fedwrench]

Yes, those are outstanding wrenches

I had an original US made 15 mm proswing wrench that after many years of faithful service, cracked ratcheting wrench portion and received one of the updated versions with 90 teeth and spline ends on since mine was no longer made. I liked it so much, i found a set on ebay.

 

[Jaysreal]

Here ya go, even though Armstrong is shut down you can pick up the full set (as far as non military) on eBay for $150. It just ***** that if you ever have to warranty them, you will be offered a Gearwrench replacement. https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/223183315019

I have the same set but I'm missing the 1/2"
Sent from my Nexus 6 using Tapatalk

 

[Tallpilot]

Yes, those are outstanding wrenches

I had an original US made 15 mm proswing wrench that after many years of faithful service, cracked ratcheting wrench portion and received one of the updated versions with 90 teeth and spline ends on since mine was no longer made. I liked it so much, i found a set on ebay.

Are you a fan of spline? I guess I’m old school because all of my wrenches are still 6 or 12 points.

 

[Fedwrench]

Are you a fan of spline? I guess I’m old school because all of my wrenches are still 6 or 12 points.

not really a fan but, if it's the only option available, it's ok. Spline can be harsh and you definitely want to use the correct size wrench to avoid fastener damage.

 

[gatlibs]

Did Armstrong make a metric version as well as the standard version?

 

[Fedwrench]

Did Armstrong make a metric version as well as the standard version?

yes, armstrong had a set that ranged from 10-19 mm. they also offered 8 mm, and larger sizes 20-25 mm.

 

[Snap_cap]

Those snap on xdhrm wrenches are the best wrenches I own and use by a long shot...

I still need to complete my Metric set (need the 8 & 9), but they are easily my favorite wrenches to use.

 

[Jaysreal]

Did Armstrong make a metric version as well as the standard version?

Yes , but due to the popularity of metric these days you may struggle finding a complete set like the one I linked. The metric versions are numbered 54-508 for 8 mm and continue upwards (54-509,54-510, etc for 9 mm and 10 mm) you may have luck searching for the individual wrenches you need on eBay. I tried but can't find the product numbers for the full sets.

Sent from my Nexus 6 using Tapatalk

 

[jsmeece]

Yes , but due to the popularity of metric these days you may struggle finding a complete set like the one I linked. The metric versions are numbered 54-508 for 8 mm and continue upwards (54-509,54-510, etc for 9 mm and 10 mm) you may have luck searching for the individual wrenches you need on eBay. I tried but can't find the product numbers for the full sets.

Sent from my Nexus 6 using Tapatalk

Armstrong 7 Pc. 12 Point SAE Double Box Ratcheting Wrench Set
with Wrench Roll 3/8 to 3/4 Cat No. 27-609

Armstrong 10 Pc. 12 Point Metric Double Box Ratcheting Wrench
Set with Wrench Roll 10 to 19mm Cat No. 54-609

Armstrong 17 Pc. 12 Point SAE/Metric Double Box Ratcheting
Wrench Set with Wrench Roll (Both sets listed above) Cat No. 27-708

Armstrong 4 Pc. 12 Point SAE Double Box Ratcheting Wrench Set
with Wrench Roll 13/16 to 1 inch Cat No. 27-704

I could not find a catalog listing for the Metric set 21 to 25mm.

I hope this helps

 

[jacked_72]

https://www.amazon.com/dp/B000T8WFBU/?tag=atomicindus08-20

Looks like Gear Wrench makes a set.

 

[Fedwrench]

Looks like Gear Wrench makes a set.

The Gearwrench gearbox are much longer than the Armstrong/Matco standard length versions and aren't US made.
The original Armstrong number for the large metric set was 54-504 consisting of 54-520 a 21 mm wrench, 54-521 22mm, 54-522 24 mm, 54-523 25 mm plus the vinyl roll 29-410.
Long since discontinued.