bought this 4-in-1 (or sometimes called 6-in1) torx driver at an estate sale. The bits apparently do not come from Sears, or anywhere else that I can find. I am looking for a t-20 that will fit this handle. Any ideas where these bits come from? The guy at Sears suggested I get an Ouija board and try and contact the owner in the afterlife! So far, its the best idea...hahahahahaa.
double-ended torx bits?
- Thread starter dumper
- Start date
jjjrmx5
Well-known member
Enderes.
They sell them in t15/t20 and t25/t30 shanks.
http://www.enderes.com/catalog/index.php?SCREEN=item&sid=bFFeemAYUBSaMjJV&department=17&item=18
YOu may have to e-mail enderes dierctly to see if they sell the shanks seperately or if you can order thru your local Enders retailer( I have one 1/4 mi. from my house).
If no help from above, I;ll ask my local retailer which is a mom and pop hdwe store that will order almost anything for me but based upon the wesite above they should sell the shanks in blister packs seperately that should fit.
They sell them in t15/t20 and t25/t30 shanks.
http://www.enderes.com/catalog/index.php?SCREEN=item&sid=bFFeemAYUBSaMjJV&department=17&item=18
YOu may have to e-mail enderes dierctly to see if they sell the shanks seperately or if you can order thru your local Enders retailer( I have one 1/4 mi. from my house).
If no help from above, I;ll ask my local retailer which is a mom and pop hdwe store that will order almost anything for me but based upon the wesite above they should sell the shanks in blister packs seperately that should fit.
Last edited:
jimindm
Well-known member
Snap On makes a driver like that. They also have an eight bit driver. Find a truck they may have it.
jjjrmx5
Well-known member
^^^^^^
SDDD101 is the Snap-On 10-in-1 part #.
It does come with and use short shank double end bits so I'm not sure if they will secure in the shaft the same as the typ. std. long shank double bits.
No long shank double end torx bits available from S-O. Only flat blade tip and phillips.