Drawer liners

[wchamberlain]

What is the best cure for keeping the drawer liners in place??? To avoid the crinkled look in the corners????

 

[canuckian]

put tools in the corners!!!

I'd try magnetic strips with one sticky side. Some people have used double sided tape but the problem with that is if you ever want to clean your liners, they'll be harder to take out and you'll have to re-tape them every time.

 

[SpiderGearsMan]

3M adhesive spray
to clean . just use an air gun or vacuum ..but , it's a toolbox

 

[Rag Roc]

I use ribbed rubber matting from the local rubber and hose supplier. It stays in place, and any gunk buildup can be cleaned with soap and water. A little on the expensive side, but lasts for the life of the box.

 

[NCCheesehead]

I used small drops of hot glue.

 

[05CarbonDRZ]

Good idea with the Hot Glue,It is easy to remove if you change your mind.

 

[allinon72]

I just leave them out in the sun.

 

[Mr Ratchet]

You could always use a small dap of silicon in the corners and one or two in the center.

 

[c/o say]

I used high tack gasket adhesive be warned you will not ever get the residue off with out destroying the paint. But you just cover it with new drawer liner when its time.

 

[2oolhound]

+1 on silicon same colour as your liner material.

 

[Davo3]

Magnets.

http://shop.hobbylobby.com/products/round-magnets-value-pack/

 

[airbatica]

I've had great success with rubber cement (from the office supply store). Holds well, and you can actually remove it without removing paint from the drawers.

 

[G1GRANDEUR]

Double side tape?

 

[Gregg33]

Cutting them the right size, placing tools in the drawers evenly and using magnetic tool holders all will help.

 

[greasemonkey44]

i was thinking of lining my cart with herculiner
anyone tried it before?
maybe even the outside of it too

 

[Ingram306]

I also used the 3m adhesive spray, works pretty well, havent had to remove any of them yet, hope i dont have to lol

 

[Heavy Metal Doctor]

Never took the time to stick liners in place and never really had a problem.....just don't slam the drawers and the stuff should'nt move around....unless you have to constantly roll the box around the shop - that vibration would probably cause things to move....

 

[csargents1546]

I use 3m spray adhesive also. Works great.

 

[dodge610]

I took the liners that came with my box out and have tried all kinds of liners to no avail they all moved. Then a friend told me about using Yoga mats i put these in a year ago they have not moved at all and either has the tools that are in the drawers. Just an idea i got on and googled yoga mats there were a ton of places that carry them I am very happy with how they work. P.S They come in an array of colors to I have orange and purple and also red in my boxes.

 

[Altec]

If your mats move around, you need more tools!

i was thinking of lining my cart with herculiner
anyone tried it before?
maybe even the outside of it too

It'll scratch the hell out of everything, and chip overtime.

 

[dodge610]

If your mats move around, you need more tools!



It'll scratch the hell out of everything, and chip overtime.

I will go along with that but in my box if i get anymore tools it will be new box time. Oh boy another box better start lookin.

 

[burnitwithfire]

I use car trunk carpet in the drawers with heavy tools. Cut to size and it won't move or fold on itself. Easy to clean (vaccum, air or water).