Drilled Hole Cleanout Tool

[morgaj1]

I was just watching Wheeler Dealers when they refurbed an old Army Jeep. After Edd drilled holes in the sheet metal, he had a hand tool that he used to clean off the drilled hole. Do you guys know what it's called and where I could get one?

 

[DHCrocks]

Reamer. I bought a pbswiss one from pbtools.us there are other brands available.

 

[Kenwc]

If it was sheet metal I'd bet it was a de-burring tool

 

[Advan]

One of these?


http://www.amazon.com/Grizzly-G5618-Deburring-Length-blades/dp/B0000DD4CY/ref=sr_1_2?ie=UTF8&qid=1439126807&sr=8-2&keywords=deburring+tool

 

[Axis]

Reamers are for making accurately sized holes. It was probably a de-burring tool. Countersinks work great in thicker metal.

 

[mike13u]

Deburing Tool. They are nice to have around. Shaviv is the name in deburing tools. Look at Shaviv Mango II kit. Comes with several blades and handle. About $20 on Amazon

 

[notlob]

I prefer this type of deburring tool over the bladed type:

http://www.amazon.com/Grizzly-H8079-Deburring-Countersink-Length/dp/B000M631KS/ref=sr_1_11?ie=UTF8&qid=1439136974&sr=8-11&keywords=hand+countersink

 

[2oolhound]

The 1st example does any freshly cut metal edge and usually comes with differently shaped blades. The second example does holes of a certain size.

 

[morgaj1]

The one that Edd was using looked more like the Shaviv countersink, but I really like the Mango II with the deburring tip.

 

[DHCrocks]

did it look like this? this is my PBSwiss reamer. it does a good job of cleaning up holes with a lite touch and will enlargen holes if you need just a little clearance.