drip leg

[yatg]

Are pressure gauges that read sideways not common? Or I guess the feed is on the side vs bottom? I've really only used back and bottom mount in the past.

The one on the small compressor broke when I moved and it feeds from the right side. It was just a cheap thing anyhow, I generally use liquid filled gauges.

I have a normal bottom mount one that'll work, but haven't found a decent side mount (I guess that's the name?). Not a huge deal, just had me wondering.

https://www.amazon.com/dp/B0BCYMDY5M?tag=atomicindus08-20

A 1/4" street ell will fix you right up to use common back or bottom mount gauges

 

[DaveAndStuff]

Are pressure gauges that read sideways not common? Or I guess the feed is on the side vs bottom? I've really only used back and bottom mount in the past.

The one on the small compressor broke when I moved and it feeds from the right side. It was just a cheap thing anyhow, I generally use liquid filled gauges.

I have a normal bottom mount one that'll work, but haven't found a decent side mount (I guess that's the name?). Not a huge deal, just had me wondering.

https://www.amazon.com/dp/B0BCYMDY5M?tag=atomicindus08-20

Street elbow

Should have kept reading

 

[Beerhippie]

A 1/4" street ell will fix you right up to use common back or bottom mount gauges

Or you could just not get all **** about it and learn to cope with gauges at odd angles.

 

[DaveAndStuff]

Or you could just not get all **** about it and learn to cope with gauges at odd angles.

Is that an emegeny pressure relase hanging on the front?

 

[Beerhippie]

Is that an emegeny pressure relase hanging on the front?

Just a pressure release. The unit is a vaporizer for liquid CO2 for the brewery.

 

[Sumboodie]

A 1/4" street ell will fix you right up to use common back or bottom mount gauges

Yeah, that's what I did.

 

[DaveAndStuff]

Just a pressure release. The unit is a vaporizer for liquid CO2 for the brewery.

I was talking about the buck-saw

 

[Sumboodie]

Or you could just not get all **** about it and learn to cope with gauges at odd angles.

The glycerine leaks out after a while. It's meant to be kept plug up... like these.

 

[danielbuck]

A

Already is one. Im not redoing factory stuff to add a drain though.

without the drain, it's just putting water into your tank. I'll shut up now though, I've said my piece.

 

[Beerhippie]

I was talking about the buck-saw

Oh, that. It's a frame saw. It just hangs out there. Y'know how it is when folks find out you're interested in old tools and you don't want to turn them off by rejecting what they bring you, just in case next time it is really cool? That's how you end up with three or four of these.

 

[DaveAndStuff]

without the drain, it's just putting water into your tank. I'll shut up now though, I've said my piece.

It is designed to put water in the tank.