To avoid these ads, REGISTER NOW!

E-tek's attached 2 car....

e-tek

Well-known member
Joined
Dec 19, 2007
Messages
10,690
Location
Saskatoon, SK
After several years of living in my shop, it was finally time to show the 2-car attached garage some LOVE. This weekend, the floor, next weekend - who knows!

The space had sunk to a new low. Even the lovely Mrs E-tek didn't want to park in there - although not enough to subject "Lizzie" to an outside berth!

100_1107.JPG


First thing was to clear the floor in preperation for the floor prep:

100_1108.JPG


There many applications of latex floor paint that had to be removed, so I rented a drum sander and went through a few 20G pads:

100_1109.JPG


Here's the surface after sanding:

100_1112.JPG


IMG00367-20110929-1238.jpg


Once cleaned I was careful to protect it from car and dog excrement overnight:

100_1110.JPG


To repair some cracks, I couldn't think of anything better than plastic body filler, which worked very well!

IMG00369-20110930-1259.jpg


IMG00370-20110930-1300.jpg


A couple hours later and VIOLA - new flooring! The product was Rustoleum's 2-part Garage Floor Epoxy Coat. I bought 2 kits at $70 a piece and used 1.5 kits. In retrospect, I should have only mixed half the second batch so I would have had some for a touch up down the road. However, I don't think it's shelf-life is all that long - when I opened one of the kits, the catalyst had partially crystalized.

100_1120.JPG


100_1118.JPG


100_1119.JPG


All in all, I'm thrilled to have finally got 'er done and Mrs. E-tek is happy to have a garage worthy of her Mini Cooper (Lizzie).

:beer:
 
Last edited:
To avoid these ads, REGISTER NOW!

ddrewyor

Well-known member
Joined
Dec 23, 2007
Messages
250
Nice floor. What is on the right side in the finished picture? Thanks
 
OP
E

e-tek

Well-known member
Joined
Dec 19, 2007
Messages
10,690
Location
Saskatoon, SK
That's a 6 foot pit the original owner put in! As I now have a BendPak in my shop out back, I mostly use it for tire storage.

IMG_4245.JPG
 

ddrewyor

Well-known member
Joined
Dec 23, 2007
Messages
250
Interesting - I have followed several of your threads and you do great work. Take care

Dave
 

jvitez

Well-known member
Joined
Nov 30, 2009
Messages
2,429
Location
Big Sky Country, Canada
Wow, a beautiful floor, and a place to hide the bodies. Cool. :)

Only a couple of hours? It looks like it would be a many hour job. How easy was it overall to apply?
 

Omphaloskeptic

Well-known member
Joined
Oct 11, 2008
Messages
2,346
Location
Ultima Ratio, Wa.
E-tek, you had half a gallon of paint left and you did not paint the pit?! :shocking:

Seriously, a very good looking transformation AND you made points with Mrs. E-tek; well done, m'lad, well done! :thumbup:
 

Thruxton

Well-known member
Joined
Dec 30, 2010
Messages
767
Location
Virginia
Now THAT is motivational! Just finished drywall, still warm enough to do the floor...
 
To avoid these ads, REGISTER NOW!
OP
E

e-tek

Well-known member
Joined
Dec 19, 2007
Messages
10,690
Location
Saskatoon, SK
Wow, a beautiful floor, and a place to hide the bodies. Cool. :)

Only a couple of hours? It looks like it would be a many hour job. How easy was it overall to apply?

It actually went much faster than I thought. After reading so many "All-Weekend" slogs by other guys on here, I was ready for much worse....

The drum sanding took me a little less than 2 hours. I rented the machine from Homey Depot on a 4-hour weekday special (Thursday) and had it back in 3 hours. The next day I blew it off with the leaf blower, vacuumed it and then applied the Epoxy. Had it not been for the 30-minute wait time for Parts A and B to set-off, I'd have been done in 2 hours. From start to finsih it was about 3 hours Friday. Total = 5 hours.

E-tek, you had half a gallon of paint left and you did not paint the pit?! :shocking:
Now THAT should have been the plan!!:(

Seriously, a very good looking transformation AND you made points with Mrs. E-tek; well done, m'lad, well done! :thumbup:

Happy wife - happy life (and good *** too!!) :lol_hitti
 

Kevin54

MEMBER EMERITUS
Joined
Jan 12, 2005
Messages
29,341
Location
Urbana, Ohio
E-Tek...how many coats of paint were on the garage floor that you had to sand off? The reason I ask is that I need to sand ours off due to large areas flaked off all over. Our house garage is about 22' x 22' now. All in all I thing I have three coats on ours that nned to come off. How many of the 20 grit pads did you go through? I figure I'll still ahve a few warm days left this month to get it done.
 

MoonRise

Well-known member
Joined
Nov 5, 2010
Messages
4,045
Location
NJ
:( Still waiting for those promised pics of Mrs. E-tek with the Mini. :lol_hitti

And that's not a "drum sander", that's a pad sander. :beer:

Floor looks nice. And the Mrs. is happy, so all good. :beer:

Now about those pics ... :bounce:
 

buening

Well-known member
Joined
Dec 17, 2007
Messages
1,338
Location
Decatur, IL
What happens when moisture creeps up through the crack and gets into the body filler? Food for thought ;)

Floor looks good BTW!
 
OP
E

e-tek

Well-known member
Joined
Dec 19, 2007
Messages
10,690
Location
Saskatoon, SK
What happens when moisture creeps up through the crack and gets into the body filler? Food for thought ;)

Floor looks good BTW!

Luckily there's no moisture in dem cracks.....

As for Mrs E-tek.....join the cue, I've spent my life waiting on her....:lol_hitti
 
OP
E

e-tek

Well-known member
Joined
Dec 19, 2007
Messages
10,690
Location
Saskatoon, SK
E-Tek...how many coats of paint were on the garage floor that you had to sand off? The reason I ask is that I need to sand ours off due to large areas flaked off all over. Our house garage is about 22' x 22' now. All in all I thing I have three coats on ours that nned to come off. How many of the 20 grit pads did you go through? I figure I'll still ahve a few warm days left this month to get it done.

I actually could have done it with a single 20Grit disc. They don't wear down much at all. I did put a new disc on for a final go over, but it was hardly used when I was done.
 
To avoid these ads, REGISTER NOW!
Top Bottom