To avoid these ads, REGISTER NOW!

Eagle Carports 20x21 build

fastbike02

Well-known member
Joined
Nov 30, 2015
Messages
501
Location
Walnut Grove MS
As some of y'all might have seen in my other post I had issues with the contractors getting stuck in my yard but besides that I quite please with the building. I plan on adding extra braces inside and insulating it when the rain stops. I would have took more pictures but it started pouring soon as I get everything inside the shop.

This was concrete being poured, I didn't take pictures of the forming bc I did it myself and I worked like a rented mule to get it done in time



This was the contractors, they worked well into the night to get the building 90% done





This is what I got for just under 4K, I think it was a great deal myself




Hopefully soon I will post pics of interior and the rest of the build
 
To avoid these ads, REGISTER NOW!
OP
F

fastbike02

Well-known member
Joined
Nov 30, 2015
Messages
501
Location
Walnut Grove MS
Funny story about the land, when I started the forming I didn't own the land lol, it was only after I had the forms up did the real landowner inform me that it was his land and offer to sale it to me. To be honest I wanted a 30x20 but budget wouldn't allow it at the moment (after buying the lot) and I mostly work on atv's and motorcycles. Also I figure this summer I will pour another 12ft and have the building extend to be a 32x21 if I need it.
 
Last edited:
To avoid these ads, REGISTER NOW!

savethatclassic

Well-known member
Joined
Oct 23, 2015
Messages
75
Location
Hawthorne CA
Funny story about the land, when I started the forming I didn't own the land lol, it was only after I had the forms up did the real landowner inform me that it was his land and offer to sale it to me. To be honest I wanted a 30x20 but budget wouldn't allow it at the moment and I mostly work on atv's and motorcycles. Also I figure this summer I will pour another 12ft and have the building extend to be a 32x21 if I need it.

Right on, looks good!
 
OP
F

fastbike02

Well-known member
Joined
Nov 30, 2015
Messages
501
Location
Walnut Grove MS
Haven't been able to work much on my shop but I did get conduit in the ground and mounted to the house.. With any luck tomorrow I will go pick up the ground wire and run some cable out

IMG_3418_zpsnjhe3awd.jpg
[/URL][/IMG]
 
To avoid these ads, REGISTER NOW!
Top Bottom