Ebay or Auction Deals Permathread!

[winlinmac]

JEGS 69-pc Magnetic Screwdriver set Awls Torx Square Phillips Slotted Bits 80755
$19.99
http://www.ebay.com/itm/JEGS-69-pc-...976c103efd8&rpp_icid=581362e4e4b0259a23cc0c6d

 

[Pontiac787]

I asked my mail lady about it yesterday. They tracked it to the neighbors house, she took it out of the mailbox today and delivered it to me. Nice little ratchet.

Glad to hear you were able to locate the package.

 

[four.cycle]

JS Technologies (Alpharetta, Ga.)
1/4" drive SAE socket set w/box
(military contract / small arms tool kit)
reduced in price.
$12.00 + $5.95 shipping now. 0 bids now. ends Mon. 11/07
OR $20.00 + $5.95 shipping now.

I picked up two of these before the price reduction, and was actually pretty impressed. Ratchet has a fairly nice action. US made.

Don't panic if it's gone - the seller seems to have an endless supply but only posts them one at a time.

As near as I've been able to figure, JS Technologies is now part of the Apex Group.

 

[TM98]

JS Technologies (Alpharetta, Ga.)

1/4" drive SAE socket set w/box

(military contract / small arms tool kit)

reduced in price.

$12.00 + $5.95 shipping now. 0 bids now. ends Mon. 11/07

OR $20.00 + $5.95 shipping now.



I picked up two of these before the price reduction, and was actually pretty impressed. Ratchet has a fairly nice action. US made.



Don't panic if it's gone - the seller seems to have an endless supply but only posts them one at a time.



As near as I've been able to figure, JS Technologies is now part of the Apex Group.

Do you have a link?

 

[winlinmac]

^ seller only posts one quantity at a time.

 

[four.cycle]

Do you have a link?

oops!

for the socket set I mentioned just above:

http://www.ebay.com/itm/A5-JS-USA-1...:g:wWsAAOSwIgNXnpSH&item=182340942042&vxp=mtr

as far a a link to JS Technology, no, I do not.
it's clear they're a contract supplier for the military from the listings currently on Ebay. search " JS socket " and " JS torque wrench ". looks like they sell a hell of a lot of fancy-schmantzy torque wrenches to the military.

I spent a couple hours poking around on the web late one night but was unable to find much information on the company other than their location.
Here's an old address (shown on the instruction sheet for a torque wrench that was listed on Ebay some time back):



There are two Ebay sellers (Keystone Enterprises and markandmandee) who seem to have boatloads of their stuff for sale. Quite a bit of it's engraved, but the prices seem pretty reasonable. I've gotten a few pieces of JS stuff with other sets I've purchased - a 1/2" drive extension, a 1/2" universal joint, and a 1/4" universal joint (among other things) - and (like the 1/4" drive socket set above) it seems to be well made and nicely finished. I would posit that it must be of reasonable quality if they're selling it to the government, but that may be just wild speculation on my part.

 

[four.cycle]

Montgomery Ward "Powr Kraft" 1/2" drive SAE socket set w/original box
7/16" - 15/16"
used. cherry condition.
looks like Wright manufactured (waiting on confirmation from seller)
$39.99 + $25.25 shipping now. 0 bids now. ends Fri. 11/11
http://www.ebay.com/itm/VINTAGE-POW...:g:lp4AAOSwImRYHQSq&item=302129359342&vxp=mtr

 

[Rick M]

Montgomery Ward "Powr Kraft" 1/2" drive SAE socket set w/original box
7/16" - 15/16"
used. cherry condition.
looks like Wright manufactured (waiting on confirmation from seller)
$39.99 + $25.25 shipping now. 0 bids now. ends Fri. 11/11
http://www.ebay.com/itm/VINTAGE-POW...:g:lp4AAOSwImRYHQSq&item=302129359342&vxp=mtr

That is cherry. Makes me wish I had a use for it as I only buy users, not a collector.

 

[wvrailroader]

Montgomery Ward "Powr Kraft" 1/2" drive SAE socket set w/original box
7/16" - 15/16"
used. cherry condition.
looks like Wright manufactured (waiting on confirmation from seller)
$39.99 + $25.25 shipping now. 0 bids now. ends Fri. 11/11
http://www.ebay.com/itm/VINTAGE-POW...:g:lp4AAOSwImRYHQSq&item=302129359342&vxp=mtr

I am positive they are Wright. I have a Powr Kraft 1/2" ratchet just like that and the end of the rubber handle has the Wright "W" logo on it.

Sent from my SM-G930R4 using Tapatalk

 

[Gannz]

Montgomery Ward "Powr Kraft" 1/2" drive SAE socket set w/original box
7/16" - 15/16"
used. cherry condition.
looks like Wright manufactured (waiting on confirmation from seller)
$39.99 + $25.25 shipping now. 0 bids now. ends Fri. 11/11
http://www.ebay.com/itm/VINTAGE-POW...:g:lp4AAOSwImRYHQSq&item=302129359342&vxp=mtr

That's a lot for shipping IMO but it seems to be calculated by region. Only $11 for me expedited and they have an $8 shipping option also.

 

[four.cycle]

re: Powr Kraft 1/2" socket set above

shipping costs vary by geographic location. I forgot to include that in the post above.
the entire set is Wright manufactured. confirmed with seller via email this morning.

11/05/16 10:38 PDT

 

[four.cycle]

* shipping costs may vary depending on geographic location *

ratchet

Indestro Super 2875 1/4" drive RHFT (52-tooth) ratchet
used. engraved.
$1.99 + $6.80 shipping now. 0 bids now. ends Sat. 11/12
OR $8.00 + $6.80 shipping "buy now"
http://www.ebay.com/itm/VINTAGE-IND...543356?hash=item211a15973c:g:MRYAAOSwcLxYHjlA

==

socket

Craftsman 20-pc BE socket set w/box
appears to be 3/8" drive - not specified in ad. set is not complete see photos and ad text for content
used
BE
one cent + $35.60 shipping now. 1 bid now. ends Sunday 11/06 12:44 PST
http://www.ebay.com/itm/272434671040?ul_noapp=true

 

[four.cycle]

* shipping costs may vary depending on geographic location *

socket

PENNCRAFT 10-pc 3/8" drive socket set w/box (New Britain manufactured?)
3/8" - 3/4"
listed as used. looks new.
$8.00 + $7.00 shipping now. 0 bids now. ends Sun. 11/13
http://www.ebay.com/itm/Vintage-Pen...809895?hash=item33c284b827:g:lwIAAOSwo4pYH4Zc

==

wrench

POWR KRAFT 7-pc SAE double-end box wrench set
3/8" - 1"
used
$33.00 + $6.80 shipping "buy now"
http://www.ebay.com/itm/Vintage-Pow...361301?hash=item33c27ddfd5:g:vUcAAOSwj2dXjR-o

==

nut driver

PROTO 7-pc SAE nutdriver set w/plastic case
3/16" - 1/2"
used
$9.50 + $6.75 shipping now. 3 bids now. ends Sat. 11/12
http://www.ebay.com/itm/7-PROTO-PRO...:g:QfUAAOSwo4pYG0pR&item=201708024256&vxp=mtr

==

puller

OTC (Owatonna) 1001-D small 2-jaw gear puller
used
99 cents + $6.75 shipping now. 1 bid now. ends Sat. 11/12
http://www.ebay.com/itm/OTC-TOOLS-2...:g:zoMAAOSwo4pYGwGw&item=361811210193&vxp=mtr

 

[pauls_workshop]

JS Technologies (Alpharetta, Ga.)
1/4" drive SAE socket set w/box
(military contract / small arms tool kit)
reduced in price.
$12.00 + $5.95 shipping now. 0 bids now. ends Mon. 11/07
OR $20.00 + $5.95 shipping now.

I picked up two of these before the price reduction, and was actually pretty impressed. Ratchet has a fairly nice action. US made.

Don't panic if it's gone - the seller seems to have an endless supply but only posts them one at a time.

As near as I've been able to figure, JS Technologies is now part of the Apex Group.

x2 on JS hand tools. Really premium stuff. Like Proto, SK, Wright, etc. - Paul

 

[dkroth]

At $0.10 per socket this may or may not be a deal, but the seller deserves a bump for taking the time to arrange the sockets like that.



http://www.ebay.com/itm/260pc-mixed...933820?hash=item28237aabfc:g:yYUAAOSwvFZW7l3~

 

[Gannz]

7 available @ 260 each. That's a lot of 1/4 inch sockets.

I'm missing a 7mm from my set. Think I can ask him to sell me just one?

Looks like he took the pic with a 10 year old flip phone.

 

[a52-830]

7 available @ 260 each. That's a lot of 1/4 inch sockets.

I'm missing a 7mm from my set. Think I can ask him to sell me just one?

Looks like he took the pic with a 10 year old flip phone.

if you would rather get 1000 for 50$ from him:

http://www.ebay.com/itm/172394029214

damn, he has a lot of 1/4" sockets. suppose the rusty ones are the "vintage" ones?

but . . .

i need that like i need another hole in my head, but i admit i am tempted.

and he will ship that mess for 8$ to me. . . . . . . . .

 

[Tellingthem]

Saw this NOS "USGI EASCO 11 Pc. 1/4" Dr. Socket Set. With Ratchet and Ratchet Extension USA"
Mostly Easco stuff but it has a Wright 2426 1/4" Ratchet $26.13 + Shipping
Link

 

[four.cycle]

* shipping costs may vary depending on geographic location *

puller

Owatonna (OTC) 1001 and 2617 small 2-jaw gear pullers (two pullers)
used
$9.00 + $6.00 shipping now. 0 bids now. ends Sun. 11/13
http://www.ebay.com/itm/TWO-OTC-OWA...:g:zDIAAOSwXeJYH4Yu&item=192020559137&vxp=mtr

==

here's the URL for the PROTO 7-pc nutdriver set on the previous page: (still (9.50 + shipping)
http://www.ebay.com/itm/7-PROTO-PRO...:g:QfUAAOSwo4pYG0pR&item=201708024256&vxp=mtr

 

[winlinmac]

I've noticed most of the deals posted here are Fractional and not Metric. Is Metric the norm these days? I thought we must have both.

Thank goodness the following set is fractional and not metric. Otherwise I would have been all over this. Thanks for sharing.

Saw this NOS "USGI EASCO 11 Pc. 1/4" Dr. Socket Set. With Ratchet and Ratchet Extension USA"
Mostly Easco stuff but it has a Wright 2426 1/4" Ratchet $26.13 + Shipping
Link

 

[Pumpman1968]

At $0.10 per socket this may or may not be a deal, but the seller deserves a bump for taking the time to arrange the sockets like that.



http://www.ebay.com/itm/260pc-mixed...933820?hash=item28237aabfc:g:yYUAAOSwvFZW7l3~

That was nice of him...........easy to see how many are cheap/imported filler!

 

[a52-830]

Armstrong Tools 12-996 1/2" Dr. Indexible Ratchet USA 39$ plus shipping (for me 6.50$). above 100$ everywhere else.

http://www.ebay.com/itm/332025622009

from cripe distributing.

i have one (purchased from them some time ago). a great 72 tooth ftrh indexing wrench.

 

[four.cycle]

* shipping costs may vary depending on geographic location *

socket

PROTO 12-pc 1/4" drive 6-point SAE socket set (sockets only)
1/8" - 9/16" (NO 1/2" NO 9/32") (includes 1/4" and 5/16" 8-point)
new
$23.00 + $3.90 shipping "buy now"
http://www.ebay.com/itm/Proto-Profe...:g:tGMAAOSw8gVYAnJ5&item=162273913360&vxp=mtr

==

nut driver

Proamerica 9-piece SAE nut driver set w/pouch *
3/16" - 9/16"
new
$32.00 incl. shipping "buy now"
http://www.ebay.com/itm/9-Piece-Jum...847132?hash=item5b2e3e1f5c:g:4eQAAOSw5cNYIah6

(* beefier handles on these than on my Vacos or Craftsmans *)

 

[four.cycle]

* shipping costs may vary depending on geographic location *

ratchet

WILLIAMS M51 1/4" drive pear-head ratchet
used
$18.00 incl. shipping "buy now"
http://www.ebay.com/itm/Vintage-Wil...592583?hash=item2a74c37387:g:91kAAOSwXeJYIisE

==

WRIGHT 2400 1/4" drive RHFT ratchet
used
$16.00 incl. shipping "buy now"
http://www.ebay.com/itm/Wright-Vint...579732?hash=item2a74c34154:g:FSIAAOSwnbZYIihR

==

S-K 40970 1/4" drive RHFT ratchet (diamond logo)
used
$18.00 incl. shipping "buy now"
http://www.ebay.com/itm/Vintage-S-K...712557?hash=item2824009fed:g:9rIAAOSwHMJYIiqw

==

wrench

PROTO 6-pc SAE open-end wrench set w/pouch
3/8" - 15/16" (see ad text and photos for content!)
used. engraved. cheap.
$11.50 + $11.74 "buy now"
http://www.ebay.com/itm/Proto-2409-...:g:Y24AAOSwNRdX8~Sq&item=302133217258&vxp=mtr


==

vintage / collector

PLOMB 16-pc 1/4" drive SAE socket set
(* see ad text and photos for content and condition *)
( Seller: “These are all good tools that has no previous owner marks that have been put together to make as set ”)
used
$9.99 + $6.90 shipping now. 0 bids now. ends Sun. 11/13
http://www.ebay.com/itm/vintage-Plo...ewItem&hash=item360c805481:g:LVcAAOSwMVdYIlnf

 

[winlinmac]

This is on sale
http://www.ebay.com/itm/Milwaukee-4...C-4-0-Extended-Capacity-Battery-/122087964669

 

[four.cycle]

* shipping costs may vary depending on geographic location *

Thorsen 88JNR 3/8" drive RHFT flex-head ratchet
used.
$15.00 incl. shipping "buy now"
listed 11/11 10:49 PST
http://www.ebay.com/itm/Thorsen-3-8...:g:7JoAAOSw5cNYJhJl&item=222311998187&vxp=mtr

* SOLD 11/11 13:35 PST *

 

[T45]

At $0.10 per socket this may or may not be a deal, but the seller deserves a bump for taking the time to arrange the sockets like that.



http://www.ebay.com/itm/260pc-mixed...933820?hash=item28237aabfc:g:yYUAAOSwvFZW7l3~

"Each order will fit in a small flat rate box, discounted shipping on more than 3 orders"

This sounds like a scam TBH...like you get a small flat rate box of unkown junk for $33 dollars...

Caveat emptor and all that.

 

[OSULemon]

"Each order will fit in a small flat rate box, discounted shipping on more than 3 orders"

This sounds like a scam TBH...like you get a small flat rate box of unkown junk for $33 dollars...

Caveat emptor and all that.

He's not exactly spelling out the sizes you'll get. I'm not sure why you think it's a scam.

 

[four.cycle]

* shipping costs may vary depending on geographic location *

ratchet

Indestro Super 2875 1/4" drive RHFT (52-tooth) ratchet
used. engraved
$3.25 + $3.83 shipping now. 2 bids now. ends Saturday Nov. 12 12:04 PST
http://www.ebay.com/itm/VINTAGE-IND...543356?hash=item211a15973c:g:MRYAAOSwcLxYHjlA

==

Owatonna (OTC) H363B 3/4" drive reversible ratchet
used
$19.99 + $22.40 shipping OBO "buy now"
listed 11/11 14:33 PST
http://www.ebay.com/itm/OTC-Owatonn...208982?hash=item3d2b0bf516:g:tfkAAOSwHMJYJkZN

socket

S-K 12-pc 1/4" drive socket set (ad does not specify SAE or Metric, but with the inclusion of the 8-points I think it's reasonable to assume it's SAE)
(appears to be missing a couple sockets)
used. cheap.
listed 11/11 07:32 PST
$29.98 incl. shipping "buy now"
http://www.ebay.com/itm/S-K-SK-Tool...035772?hash=item3f6f0c973c:g:ZhYAAOSwB09YJeR7

 

[T45]

He's not exactly spelling out the sizes you'll get. I'm not sure why you think it's a scam.

Because the ad is for "260 sockets" for $25+8 shipping.

But you will get a 'sampling' of sockets from a lot 260, not the whole lot.

1) "260 sockets" won't fit in a small flat rate box.

2) Also says you buy 3 boxes full you get a discount...etc.

So you're just getting a scoop of unkown junk in a flat rate box.

3) For $33 bucks you can buy a NOS USA socket in a decent brand.

Just be careful and confirm in writing what you expect to get.

 

[tool_scrounge]

Owatonna (OTC) H363B 3/4" drive reversible ratchet
used
$19.99 + $22.40 shipping OBO "buy now"
listed 11/11 14:33 PST
http://www.ebay.com/itm/OTC-Owatonn...208982?hash=item3d2b0bf516:g:tfkAAOSwHMJYJkZN

Looks like a relabeled New Britain 3/4" ratchet. If so it is really nice ratchet with a small head, relatively fine tooth count and low drag. I really like the smooth action.

 

[a52-830]

while i agree that there are irregularities with the listing . . ..

Because the ad is for "260 sockets" for $25+8 shipping.

But you will get a 'sampling' of sockets from a lot 260, not the whole lot.

wording to the listing:

"Buyer will get everything seen here in pictures. "

 

[rob1200]

wording to the listing:

"Buyer will get everything seen here in pictures. "

Did you notice that the seller shows a quantity of seven for sale (currently 5 available/2 sold).

So the seller has seven identical sets of 260 random sockets, each set looking exactly like that photograph?

 

[Super Sport]

Because the ad is for "260 sockets" for $25+8 shipping.

But you will get a 'sampling' of sockets from a lot 260, not the whole lot.

1) "260 sockets" won't fit in a small flat rate box.

2) Also says you buy 3 boxes full you get a discount...etc.

So you're just getting a scoop of unkown junk in a flat rate box.

3) For $33 bucks you can buy a NOS USA socket in a decent brand.

Just be careful and confirm in writing what you expect to get.

I would be willing to bet 260 1/4 drive sockets could fit in a small flat rate box.

I'm sure they're junk sockets, but I'm thinking you would get a total of 260. Which isn't that great, I usually sell junk import sockets for about 10 cents each.

 

[four.cycle]

this might be a stupid question, but why would you even waste your time on something like that? odds are you're going to get a mess of Taiwan or Chinese-made oddballs. (9mm anyone?)

* shipping costs may vary depending on geographic location *

if you are looking for cheap 1/4" drive sockets, you cannot beat this:

Herbrand 9-pc 1/4" drive 6-pt SAE socket set (sockets only)
3/16, 7/32, 1/4in, 9/32, 5/16, 11/32, 3/8,7/16, and 1/2in
new NOS
$6.00 incl. shipping "buy now"
http://www.ebay.com/itm/Herbrand-So...552000?hash=item360bffde80:g:G8IAAOSwd0BV67oI

(* these appear to be later "Triangle era". not Snap-on or Proto, but not bad. I picked up a couple sets. definitely NOT "thin wall" stuff - if you're working with tight clearances, go with some 12-pt Craftsman G series.)

if you need something to push the sockets with:

Herbrand 1/4" drive breaker bars (two each)
new NOS
$9.99 incl. shipping "buy now"
http://www.ebay.com/itm/2pc-HERBRAN...549931?hash=item54142a00eb:g:a70AAOSw1-RUZhZs

(* pretty beefy. you'd have a hell of a time breaking one of these. see comparison photo below.)



==

Proto/Challenger 14-pc 1/4" drive SAE socket set w/box
3/16" - 1/2"
used
$14.99 + $5.00 shipping now. 0 bids now. ends Sat. 11/19
http://www.ebay.com/itm/Vintage-Cha...892049?hash=item41b7a499d1:g:ZOUAAOSwZJBX-u2b
(* the 1060 Challenger is actually a pretty nice little unit. * excellent seller. *)

==

Thorsen 17-pc 1/4" and 3/8" drive SAE socket set w/box
3/16" - 3/4" (missing 13/16" spark plug socket)
listed as used. looks new.
(* shipping might be a deal-killer. check shipping rate for your area *)
$19.99 + $20.05 shipping "buy now"
http://www.ebay.com/itm/Vintage-Tho...254870?hash=item1a1f98c356:g:j~MAAOSwcLxYI4TV

==

Thorsen 18-pc 1/4" and 3/8" drive SAE socket set w/box
3/16" - 3/4" (same set as above, but includes spark plug socket)
listed as used. looks pretty good except for some green paint dots.
$19.99 incl. shipping now. 1 bid now. ends Sunday 11/13 19:08 PST
http://www.ebay.com/itm/Vintage-Tho...817087?hash=item4d4e572a3f:g:TNoAAOSw4GVYIpM0

==

No reason to shell out a ton of money for a 1/4" set unless you're buying Snap-on or Proto.

As for the hodge-podge "socket lots" - there are better deals for better stuff on there every day... but what are you going to do with 27 11/32" 12-points?

 

[a52-830]

this might be a stupid question, but why would you even waste your time on something like that? odds are you're going to get a mess of Taiwan or Chinese-made oddballs. (9mm anyone?)

As for the hodge-podge "socket lots" - there are better deals for better stuff on there every day... but what are you going to do with 27 11/32" 12-points?

the yankee swap parties my wife drags me to. . . . .

 

[Richard Cranium]

I sent a large one price box of sockets to Bull a couple of years ago, I was surprised at how many I could get into a box. Rich

 

[four.cycle]

* shipping costs may vary depending on geographic location *

ratchet

Herbrand S-8 1/2" drive "Ratch-A-Dapter"
used
$9.99 + $7.85 shipping OBO "buy now"
http://www.ebay.com/itm/HERBRAND-S-...:g:S5sAAOSwXeJYEA1y&item=122226622410&vxp=mtr

==

S-K 40970 1/4" drive RHFT ratchet
used. excellent.
$22.99 + $4.16 shipping OBO "buy now"
http://www.ebay.com/itm/Vintage-SK-...:g:m3AAAOSwoudW9yMy&item=122224200838&vxp=mtr

==

S-K 40975 1/4" drive RHFT ratchet with S-K 40962 1/4" drive 6-inch extension
used
$15.00 + $3.60 shipping "buy now"
http://www.ebay.com/itm/S-K-Tools-1...657577?hash=item25c89f1069:g:TtAAAOSwcUBYKNRL

==

S-K 40975 1/4" drive RHFT ratchet
used
$20.00 + $3.00 shipping "buy now"
http://www.ebay.com/itm/Ratchet-1-4...988158?hash=item1c752d4ffe:g:XdIAAOSw4GVYKMGP

==

S-K 45170 3/8" drive RHFT ratchet
used. excellent.
$15.00 incl. shipping "buy now"
http://www.ebay.com/itm/S-K-No-4517...753277?hash=item2cb5afb8fd:g:YPAAAOSw5cNYKQHh

==

S-K 45170 3/8" drive RHFT ratchet
used. needs cleaning.
$8.99 + $3.60 shipping OBO "buy now"
http://www.ebay.com/itm/vtg-used-s-...293042?hash=item1c75413932:g:jgQAAOSwKOJYKgd1

==

S-K 45175 3/8" drive RHFT ratchet
used
$24.99 incl. shipping OBO "buy now"
http://www.ebay.com/itm/S-K-45175-3...678084?hash=item56905503c4:g:SJsAAOSw4GVYKO3g

==

INDESTRO 6272 3/8" drive pear-head ratchet
used
$19.95 incl. shipping OBO "buy now"
http://www.ebay.com/itm/Vintage-Ind...:g:SxQAAOSw0UdXrf-B&item=172408387338&vxp=mtr

==

WRIGHT 3429 3/8" drive "Tootsie Roll" RHFT ratchet
used
$20.00 incl. shipping "buy now"
http://www.ebay.com/itm/Wright-3-8-...639364?hash=item4658ce81c4:g:SAQAAOSwB09YKOg7

==

WRIGHT 4426 1/2" drive RHFT ratchet
used.
$24.99 incl. shipping "buy now"
http://www.ebay.com/itm/Wright-1-2-...209199?hash=item2376df6caf:g:CBUAAOSwLnBX2wZS

==

S-K 42470 1/2" drive RHFT ratchet
used
$7.99 + $6.80 shipping now. 0 bids now. ends Sun. 11/20
OR $14.99 + $6.80 shipping "buy now"
http://www.ebay.com/itm/vintage-SK-...:g:mlMAAOSwo4pYKQ04&item=361827952106&vxp=mtr

==

socket

S-K (Sherman-Klove) 16-pc 1/4" drive 6-pt SAE socket set w/original box
3/16" - 1/2"
new NOS
$49.00 incl. shipping "buy now"
(one left 11/14 20:30 PST - the other two have already sold in the last 24 hours)
http://www.ebay.com/itm/FREE-SHIPPI...:g:KokAAOSw5cNYKPC~&item=201717757029&vxp=mtr

==

JS Technologies 23-pc 3/8" drive 12-pt SAE socket set w/box
(see ad text and photos for content) (military surplus)
used. (barely)
$28.98 + $14.00 shipping "buy now"
http://www.ebay.com/itm/23-JS-J-S-R...:g:ICUAAOSwstxVJrV0&item=172408949919&vxp=mtr

==

Duro-Indestro 7-pc 3/8" drive SAE deep-well socket set (sockets only)
(seller doesn't specify whether they're 6-point or 12-point)
1/2" - 7/8"
new NOS
$10.99 + $8.05 shipping "buy now"
http://www.ebay.com/itm/401225246294?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

==

Indestro Select 12-pc 1/2" drive 12-pt SAE socket set (sockets only)
7/16" - 1-1/6" sockets and 1/2" drive universal joint
used
$24.50 + $6.00 shipping "buy now"
http://www.ebay.com/itm/Vintage-Ind...:g:QFsAAOSw0OBYKLPE&item=322328092181&vxp=mtr

==

BRITOOL 16-piece 3/4" drive SAE socket set w/original box and paperwork
1-1/16" - 1-5/8"
listed as used. obviously not used very much.
$9.99 + $30.80 shipping now. 3 bids now. ends Sun. 11/20
http://www.ebay.com/itm/Vtg-Britool...175821?hash=item33c2e5db0d:g:l7cAAOSwo4pYJ7g3

==

wrench

ALLEN/HOLO-KROME 18-pc SAE hex key set w/fabulous metal box
.028" - 5/8"
used. excellent.
$24.95 incl. shipping "buy now"
http://www.ebay.com/itm/USA-Made-AL...598775?hash=item2cb5bc9fb7:g:R1QAAOSwA3dYKmQ-

==

WURTH (Germany) 8-pc METRIC 60° offset double-end box wrench set
6mm - 22mm
used
$10.00 + $10.30 shipping now. 0 bids now. ends Mon. 11/21
http://www.ebay.com/itm/8-piece-60-...:g:ELUAAOSwImRYKk1~&item=291943072352&vxp=mtr

==

CRAFTSMAN 6-pc SAE open-end wrench set
3/8" - 1"
used
=V=
$24.95 + $6.40 shipping "buy now"
http://www.ebay.com/itm/Vintage-Cra...:g:QxgAAOSwiDFYKiEC&item=371789491817&vxp=mtr

==

S-K 7-pc SAE open-end wrench set w/pouch
1/4" - 7/8"
used. one piece engraved. mixed S-K and S-K Wayne
$21.00 + $6.00 shipping "buy now"
http://www.ebay.com/itm/SK-Tools-7-...:g:oHgAAOSwal5YKK7G&item=322328084018&vxp=mtr

==

puller

Herbrand Bonney Owatonna (OTC) puller assortment (3 big-*** pullers)
one 3-arm hub puller and two large 2-jaw gear pullers
used
$20.00 + $14.00 shipping now. 0 bids now. ends Thurs. 11/17
http://www.ebay.com/itm/Hub-Puller-...:g:ttAAAOSwiDFYKmg6&item=142179748889&vxp=mtr

==

Owatonna (OTC) 1010½ 3-arm gear puller
used
$19.99 + $11.42 shipping now. 0 bids now. ends Mon. 11/21
http://www.ebay.com/itm/Owatonna-To...:g:Gj8AAOSwcLxYKfzN&item=232143605978&vxp=mtr

==

vintage / collector

PLOMB 4749 1/4" drive pear-head ratchet
used
$24.99 incl. shipping "buy now"
http://www.ebay.com/itm/Vintage-474...446234?hash=item2ef74bf65a:g:FCAAAOSw0OBYKJxz

==

Indestro / Duro Chrome manufactured (equivalent to 3202 Indestro) 1/2" square female drive ratchet w/ 3215 drive adapter
(handle design looks like manufactured for private label)
used.
$14.97 + $7.15 shipping "buy now"
http://www.ebay.com/itm/Vintage-N-F...735146?hash=item43f9155aea:g:7A4AAOSwu-BWQiXq

==

PENNCRAFT 13-pc 1/4" drive SAE socket set w/box
(looks like New Britain manufactured)
3/16" - 1/2" (* missing 7/16" socket or I would have already bought it.)
used. (see notes in ad text)
$19.99 incl. shipping now. 0 bids now. ends Sun. 11/20
http://www.ebay.com/itm/Vintage-Pen...269533?hash=item4d4e9b1a9d:g:-CgAAOSwKOJYKTIw
(* excellent seller *)

==

HINSDALE 10-pc 1/4" drive socket set w/wall-hanging rack
(see ad text and photos for content. apparently missing one piece)
well used.
$19.99 + $6.90 shipping now. 0 bids now. ends Weds. 11/23
http://www.ebay.com/itm/Antique-11-...488351?hash=item48952e5a9f:g:FwYAAOSw44BYKQlp

==

HUSKY 18-pc 1/4" and 3/8" drive SAE socket set w/original box (New Britain manufactured)
(see ad text and photos for content. set appears to be complete but SP socket has been replaced with an S-K)
used
$20.00 + $15.50 shipping OBO "buy now"
http://www.ebay.com/itm/Husky-Ratch...840755?hash=item41b7b313b3:g:PnwAAOSw0OBYKMmZ

 

[a52-830]

cripe distributing is one of the featured players here. as usual they have a lot of good deals on their ebay store:

armstrong:

Armstrong Tools 12-996 1/2" Dr. Indexible Ratchet USA, 39$, hard to find elsewhere, but over 100$ shipped when i did.
http://www.ebay.com/itm/332025622009

Armstrong 11-931 3/8" Drive Locking Adapter USA, 9$, 24$ on amazon
http://www.ebay.com/itm/391611081160

Armstrong 10-968A 1/4" Drive Teardrop Ratchet Knurled Handle 5-1/2" USA, 14$, on amazon 37.53$
http://www.ebay.com/itm/401217500486

Armstrong 12-916A 1/2" Drive Roundhead Ratchet Knurled Handle USA, 19$, elsewhere around 25$
http://www.ebay.com/itm/401201330613

Armstrong 6 Pt Full Polish Combination Wrench 15mm 52-015 USA,3.75$, on tooltpois 9.61
http://www.ebay.com/itm/401051698934

note: they have a load of different armstrong wrenches around this price

gearwrench:

GearWrench 84050 4 Pc. Door Pad and Panel Removal Kit 14$, toolsource.com has it for 38.75$, everywhere else seems to be out of stock.
http://www.ebay.com/itm/332029248560

GearWrench Indexing Double Box Ratcheting Wrenches (40$ and above on amazon):

85484 17mm x 18mm, 18$
http://www.ebay.com/itm/401206639026

85483 15mm x 16mm, 14.50$
http://www.ebay.com/itm/330745838417

85482 13mm x 14mm, 14$
http://www.ebay.com/itm/390428534044

85481 11mm x 12mm, 12$
http://www.ebay.com/itm/390428535854

85480 8mm x 10mm, 12$
http://www.ebay.com/itm/331999980132

all of this is plus shipping. on ebay, put it in a cart, and go to the cart and ask for a shipping quote. -or- go to their web site, cripedistributing.com, (create an account if you dont have one) put it in the cart there, send an email to them adding anything on ebay that is not on the regular web site, and ask for a shipping quote. they give a discount for ordering through the web site, and are pretty aggressive on keeping shipping down to a minimum.

[note, i am not affiliated with them other than being a satisfied customer.]

 

[a52-830]

Price Slash!! Brand New 3/8 inch Drive Breaker Bar Priced Low & Free Shipping great neck brand, model fl38, 6.99$ shipped.

only 8" long (which is likely how the shipping is included), but as one of the reviewers notes: "It's a short little fella, which is good on occasion. If you need a little extra torque it slides nicely into a length of 1/2" pipe."



http://www.ebay.com/itm/361423323423

i have bought from this seller before, they are very nice. i dont know anything else about them.