To avoid these ads, REGISTER NOW!

Ebay or Auction Deals Permathread!

To avoid these ads, REGISTER NOW!
A

a52-830

Well-known member
Joined
May 28, 2016
Messages
4,644
Location
north of boston, massachusetts
brokeboater said:
That was a no brainer even for me. I've got one one the way. Thanks to the OP.
Click to expand...

if you decide to get more (they have various handle lengths and the traditional 1/4, 3/8, and 1/2 in) sizes, ebay is a better location that amazon. same vendor, but prices cycle on ebay a lot. i recently got a 25" long 1/2" flex head. it was at 75$ for a month or so, and then dropped to 40$.

also, these are the Powerbuilt Pro models only. they also offer regular Powerbuilt models, which i have not purchased, and paid no attention to. they might be the greatest thing, but i dont need more ratchets with "snap on" handles.
 
S

sweet victory

Well-known member
Joined
Jun 9, 2016
Messages
1,262
Location
USA
dkroth said:
Sweet,

Would you be willing post up your experiences with installation?

After reading a bunch of reviews on the opener I'd like to hear the story of a complete install.
Click to expand...

Sure thing! It will be a few weeks before I can get to starting to install, but from what I've heard, usually takes around 2 hours. It will probably take me a little longer. I have the drywall removed and plan to add studs where the opener mounts. Also had an outlet added right below where it will go ahead of time.
 
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
bubinga said:
Got the 9" powerbuilt 1/4" drive ratchet yesterday, seems very well made.

Sent from my MotoG3 using Tapatalk
Click to expand...
Well worth purchasing one if you need a quarter inch ratchet. Please note these are quick release and they are a flex head but it has a very nice detent as well so even if you don't need a flex head in other words the detent keeps it nice and straight. I am ever so tempted to also purchase the other quarter inch ratchet and also the 3/8 inch ratchet in that line. Please do not start a petition to revoke my man card but I do not need them flame on LMAO.................. LOL. Also I have spent a little too much this month on quote-unquote toys.

Sent from my MotoG3 using Tapatalk
 
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
bubinga said:
Well worth purchasing one if you need a quarter inch ratchet. Please note these are quick release and they are a flex head but it has a very nice detent as well so even if you don't need a flex head in other words the detent keeps it nice and straight. I am ever so tempted to also purchase the other quarter inch ratchet and also the 3/8 inch ratchet in that line. Please do not start a petition to revoke my man card but I do not need them flame on LMAO.................. LOL. Also I have spent a little too much this month on quote-unquote toys.

Sent from my MotoG3 using Tapatalk
Click to expand...
Okay don't start to petition yet please I may just go ahead and put them on my eBay credit card. Please do not start a petition to revoke my man card I know quote on quote need has nothing to do with it if you are a member of Garage Journal please do not start the petition I'll buy them I'll buy them okay nevermind I'll buy them I'll buy them I promise I'll even provide pictures for proof thank you for putting up with my silliness LOL LMAO

Sent from my MotoG3 using Tapatalk
 
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
bubinga said:
Okay don't start to petition yet please I may just go ahead and put them on my eBay credit card. Please do not start a petition to revoke my man card I know quote on quote need has nothing to do with it if you are a member of Garage Journal please do not start the petition I'll buy them I'll buy them okay nevermind I'll buy them I'll buy them I promise I'll even provide pictures for proof thank you for putting up with my silliness LOL LMAO

Sent from my MotoG3 using Tapatalk
Click to expand...
Does anyone know how to get these ratchets apart?
I'd like to be able to Lube the gears?

Sent from my MotoG3 using Tapatalk
 
A

a52-830

Well-known member
Joined
May 28, 2016
Messages
4,644
Location
north of boston, massachusetts
there is a banner on the ebay homepage offering 10% ebay bucks when using the app (8% on the site). you need to click through the banner to activate it. in the past these were not one time things, but were good for all orders placed in the window.

not as good as 15% off, but the minimum is 25$, which might make up for it.

i hate the app. last time they offered this, i used the site to browse around, and put things in the cart, and then used the app to purchase. much easier, although likely not what they intend.

UPDATE: 1) only to registered and offered ebay bucks enrolled users (check your messages on your ebay account), 2) the 25$ applies to each item, not the cart.
 
Last edited:
A

a52-830

Well-known member
Joined
May 28, 2016
Messages
4,644
Location
north of boston, massachusetts
i got an offer in the front page banner for 10% in ebay bucks on 50$ min purchase on the app, and 8% using the web site until august 30. these are often limited to specific users. check your messages onsite to see if you can enable this offer.

sometimes they offer two 15% off coupons close together at the end of the month. i wonder if they will do the same now, with this offer also available.
 
B

B Hansen

Member
Joined
Aug 4, 2017
Messages
17
Location
Arizona
JohnKal said:
Thank you sir.

Just found out the hard way, the code can only be used once...oh well, should have known.

Saved $30 anyway, MUCH appreciated. :beer:
Click to expand...

That got me too, luckily I was smart enough to bundle a couple orders for the first try and only lost out on some last minute ideas later in the day...
 
A

a52-830

Well-known member
Joined
May 28, 2016
Messages
4,644
Location
north of boston, massachusetts
SNAP ON TOOLS TOP AND BOTTOM, EMPTY

https://www.ebay.com/itm/173518133285

Item location:
Toledo, Ohio, United States

Ships to:
Local pick-up only

40'' WIDE 20'' DEEP, 58'' HIGH SNAP ON TOP N BOTTOM, BALLBEARING DRAWERS, LOCK N ROLL, 4 KEYS, BOX IN REAL NICE SHAPE FOR AGE, LITTLE PAINT PEELING/ SURFACE RUST ALONG BOTTOM LEDGE/// 550 FIRM ///. FEEL FREE TO ASK ANY QUESTION YOU LIKE,PLEASE FEEL FREE TO CHECK OUT OUR OTHER TOOLS. THANKS FOR LOOKING.

Screen Shot 2018-09-06 at 15.39.36 .jpg
 
To avoid these ads, REGISTER NOW!
A

a52-830

Well-known member
Joined
May 28, 2016
Messages
4,644
Location
north of boston, massachusetts
ebay bucks: 10% on app, 8% on web site, until the 20th.

got a message on ebay, and there was a banner on the home page.

possibly not for everyone, but worth checking if you do ebay bucks.
 
B

Bigblue&Goldie

Well-known member
Joined
Mar 12, 2009
Messages
10,672
Location
AZ
I just started the "ebay bucks" program and I've got $16 coming my way. Free money on purchases I was going to make anyway.....what's not to like? Seems like I buy more on ebay lately than Amazon.
 
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
Brian Puccio said:
Tomorrow, Sep 27 will be 15% off site-wide, $25 min purchase, $100 max discount.

https://pages.ebay.com/promo/2018/0927/69157.html
Click to expand...
Thanks Guys.
Needing some metric (woops too much of The SAE thread....lol):lol_hitti
Needing some Acme threaded rod for a lathe conversion thread, (Thread..WTH) Project .
Retro fitting an Atlas cross feed to my wood lathe if I can do it.
I think I Can.
Now would be the time to get it!
:beer:
 
R

RKA

Well-known member
Joined
Jun 9, 2010
Messages
1,744
Location
NJ
This is irritating, they aren't being upfront about what qualifies. I dropped something into my cart and went to checkout, tried to apply the code and the item was not eligible. According to their instructions, you have to go to checkout to see if it qualifies.
 
S

Super Sport

Well-known member
Joined
Jun 30, 2011
Messages
4,081
Location
West Michigan
chipdog4 said:
If you don't see the Paypal Logo under "Payments", then it should work.
Finding a seller that takes the new Managed Payments isn't easy.
Click to expand...

Ebay isn't giving much incentive to sellers to switch. Processing fees are just slightly lower, and you cannot opt back out or accept Paypal. I was invited to try it but decided against it. I think they will eventually force everyone to switch over.

I read on SD that you can try searching "managed payments" and include the description to find listings adverising that they accept that payment method.
 
C

chipdog4

Well-known member
Joined
Jul 14, 2016
Messages
481
Location
Southern Indiana
New Chicago Latrobe 5/8 Drill Bit (need 5/8 chuck) $8.99 Shipped (4 available)
https://www.ebay.com/itm/Chicago-Latrobe-49740-120-5-8-Drill-Bit/292747878769
($30.17 at Zoro) https://www.zoro.com/chicago-latrobe-taper-length-drill-58-hss-black-oxide-49740/i/G3413821/?q=49740+latrobe

New Chicago Latrobe 31/32 Reduced Shank drill bit. $11.89 + $7.99 Shipping
https://www.ebay.com/itm/C-L-CHICAGO-LATROBE-55462-HSS-1-2-REDUCED-SHK-A725/292314231303
($49.19 at Zoro) https://www.zoro.com/chicago-latrobe-silverdeming-drill-3132-hss-118-deg-55462/i/G2906206/

New Chicago Latrobe 7/8" Reduced Shank Drill Bit $14.63 shipped (3 available)
https://www.ebay.com/itm/Brand-New-Chicago-Latrobe-52456-7-8-HSS-1-2-Reduced-Shank-Silver-Deming-Drill/130842312636
($43.32 at Zoro) https://www.zoro.com/chicago-latrobe-silverdeming-drill-78-hss-118-deg-52456/i/G2565902/?q=52456+latrobe

New M.A. Ford 1" countersink $24 shipped (4 available)
https://www.ebay.com/itm/M-A-Ford-Countersink-HSS-1-Diam-x-1-2-Shank-Diam-x-2-3-4-OAL-82-79251/132755181052
($49 at Amazon) https://www.amazon.com/M-Ford-79100002-Countersink/dp/B002KGSO5K

New Chicago Latrobe Metric Drill/Tap Set $75 + $7.25 shipping
https://www.ebay.com/itm/CHICAGO-LATROBE-18-pc-Dill-Tap-Set-Spiral-Point-NC-w-Index-MADE-IN-USA-SP-18TD/142877833176?hash=item21442eb7d8:g:5k4AAOSwfjdbU6wS
($140 at Zoro) https://www.zoro.com/chicago-latrobe-hand-tapdrill-bit-set-52541/i/G3054292/
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom