To avoid these ads, REGISTER NOW!

Ebay or Auction Deals Permathread!

To avoid these ads, REGISTER NOW!

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
that "Truecraft" metric combo set I posted (post #5079) is only up to $6.50 right now...

no idea where these are going to go as they are auction items:

EASCO 9-pc SAE combination wrench set w/roll-up
5/16 - 3/4
listed as used (see photos)
$20.00 + $5.00 shipping now. 0 bids now. ends Sun 01/15



the guy with the
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
* shipping costs may vary depending upon your location! *

* METRIC WRENCH SET *


TEKTON (Taiwan ROC) 15-pc METRIC combination wrench set (full polish, wide beam)
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22mm
listed as used. not used
$75.00 + $5.40 shipping "buy now"
(* seller just sent me an offer of $65.00 + shipping *)

ARMSTRONG (US) 12-pc METRIC reversible ratcheting box end combination wrench set (full polish, wide beam)
8 9 10 11 12 13 14 15 16 17 18 19mm
listed as used. not used
$159.95 + $10.60 shipping OBO "buy now"

HAZET (Germany) 10 pieces METRIC open-end wrenches with steel holder thingie
6mm - 32mm with a mess of skips (see photos)
used
$4.25 + $13.75 shipping now. 3 bids now. ends Sun 01/15

INDESTRO 10-pc METRIC open-end wrench set w/roll-up pouch
6mm - 26mm (see photos)
used
$50.00 + $19.31 shipping "buy now"
(* seller sent me an offer two days ago of $45.00 * no idea why shipping is so high on this one *)

FACOM (France) 23 piece METRIC deep offset box combination wrench set
7mm - 32mm
fabulous
$425.00 + $14.86 shipping OBO "buy now"
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
* shipping costs may vary depending upon your location! *

KAL (US) 3/8" drive 12-point SAE socket sets (sockets only):
* all military surplus. little or no use. U.S. made. *

17 pieces - 3/8" - 7/8" - shallow and deep and two wobblies
$29.99 incl. shipping OBO "buy now"
* seller just sent me an offer of $25.00

15 pieces - 3/8" - 7/8" - shallow and deep
$24.99 incl. shipping OBO "buy now"
* seller just sent me an offer of $20.00

TWO pieces - 1/2" and 9/16" 12-point 3/8" drive universal joint sockets
$8.99 incl. shipping OBO "buy now"
* seller just sent me an offer of $8.00

====

TRW (US, made by Williams) 8-pc 3/8" drive 6 point deep-well socket set (sockets only)
3/8" - 13/16"
listed as used (see photos)
$28.00 incl. shipping now 0 bids now. ends Fri 01/20

ACESA (Spain) 5 pieces METRIC open-end wrenches
(* Acesa Tools merged in 1995 with Palmera and Irimo to form Herramientas Eurotools SA *)
14, 17, 19. 21, 22, 23, 24, 26, 30, and 32mm ends
used. dirty. cheap.
$3.00 + $15.00 shipping now. 0 bids now. ends Sun. 01/22

GRANCO (Missouri, USA) 1/2" drive 12 point 32mm socket (* military contract stuff *)
listed as used (see photo)
$10.99 incl. shipping OBO "buy now"
(* seller just sent me an offer of $9.00 *)

WRIGHT (US) 2400 1/4" drive RHFT ratchet (smallest diameter head of ANY US made RHFT - sorry Snap-on fan boys)
well used.
$5.99 + $8.27 shipping OBO "buy now"

SEARS (Japan) 6 pieces METRIC double-end box wrench set
listed as used (see photos)
$25.95 + $10.50 expedited shipping "buy now"
(* just listed this morning seller hasn't had time to consider making me an offer yet. *)

figures don't lie, but liars figure:
 

Attachments

  • Wright 2400 1.4 drive ratchet head diameter .81 in.jpg
    Wright 2400 1.4 drive ratchet head diameter .81 in.jpg
    684 KB · Views: 99
  • Wright 2400 1.4 drive ratchet head thickness .56 in.JPG
    Wright 2400 1.4 drive ratchet head thickness .56 in.JPG
    516.2 KB · Views: 83

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
** shipping costs may vary!!! **

in no particular order at all....

.... no telling where possible bidding wars might take these....



MUSTANG (US New Britain) MM43 1/4" drive RHFT ratchet (Kilness patent)
used. clean.
$4.99 + $5.00 shipping now. 1 bid now. ends Thurs. 11/19

S-K (US) 18 pieces of 1/2" drive knurled band SAE sockets and drive tools (no box)
used. see photos.
99 cents + $14.21 shipping now. 1 bid now. ends Sun. 01/22

CRAFTSMAN (US) 9 pieces 1/4" drive SAE sockets "Circle H"
used
$3.25 + $3.95 shipping now. 3 bids now. ends Sun. 01/22

KLEIN (US) 20 pieces 3/8" drive SAE socket set w/steel box
used
$8.09 + $14.00 shipping now. 3 bids now. ends Sun. 01/22

S-K WAYNE 42470 1/2" drive RHFT ratchet (with an extra repair kit?)
used
99 cents + $9.98 shipping now. 0 bids now. ends Sun. 01/22

S-K 42470 1/2" drive RHFT ratchet
used
$4.99 + $8.22 shipping now. 0 bids now. ends Sun. 01/22

AMERICAN FORGE (US New Britain) 3900 3/8" drive RHFT ratchet (Kilness patent)
slightly used. crazy cheap.
$6.00 + $6.00 shipping "buy now"
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
* shipping costs may vary depending upon your location! *

* just some items of interest -

TRW (made by Williams) 3-piece SAE flare nut wrench set
3/8" - 11/16" - 6-point openings
used. surface rust on openings
$14.99 incl. shipping now. 0 bids now. ends today at 18:50 PST

MILFORD (US) 9-inch mini hacksaw
brand new
$7.61 + $3.50 shipping "buy now"
(* seller sent offer of $7.00 *)

BLACKHAWK black plastic blow-mold box for 1/4" drive set (open center- no dividers)
used.
$9.99 + $5.99 shipping "buy now"

MILFORD (US) 45650 12-inch hacksaw
brand new
$22.40 + $8.95 shipping "buy now" (for one)
(* four or more: $15.68 each *)

PROAMERICA (US) 8-piece METRIC SHORT offset double-end box wrench set w/vinyl roll-up
6mm - 20mm
(* very nicely broached. these are NOT polished. they have a grainy, matte finish. I gave my set to a buddy who needed shorties. *)
listed as used (see photos - military surplus with low miles)
$24.95 + $10.60 shipping "Buy now"

PETERSEN DEWITT 4LN pliers
NOS
$16.99 + $5.99 shipping "buy now"

COMPARE prices online before clicking "buy now"

ICON (Taiwan ROC) 10-inch "parrot nose" pliers
used (see photos)
$15.99 + $7.99 shipping "buy now"

EZ-RED (Taiwan ROC) EZR-4SS8 "Quarter-Stick" 1/4" ratchet / bit ratchet
brand new
$28.97 incl. shipping "buy now"

KLEIN (US) D333-8 specialty pliers
listed as "unused"
$25.99 + $7.99 shipping "buy now"

WERA Wera 05007680001 Kraftform Plus 334 SK/6 Screwdriver Set and Rack, Lasertip
brand new
$45.88 incl. shipping "buy now"

WERA Wera 05105623001 Kraftform 300/7 Set 1 Screwdriver Set Kraftform Plus, 7 Pieces
brand new
$47.37 incl. shipping "buy now"

WERA 05073521001 Series 4 851/4 Z Screwdriver Bit, Phillips PH 2 x 89mm Blade
brand new
$6.72 incl. shipping "buy now"
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
* shipping costs may vary just because! *

* some items of interest. be sure to compare prices with other online retailers first on these!


CAPRI (Taiwan ROC) CP11850-14MST 14-pc SAE and METRIC "super thin" open-end wrench set w/holder
new
$129.99 incl. shipping "buy now"

CAPRI (Taiwan ROC) CP11850-7MRK 7-pc METRIC "super thin" open-end wrench set w/holder
new
$49.99 incl. shipping "buy now"

TEKTON (Taiwan) 25253 30-pc SAE and METRIC hex key set w/plastic box
slightly used (see photos)
$22.99 incl. shipping OBO "buy now"

ARMSTRONG (US) 8 pieces METRIC combination wrenches - full polish, wide beam
8 9 10 11 121 13 14 15mm
slightly used (see photos)
$50.00 incl. shipping "buy now"

ARMSTRONG (US) 13-923 3/4" drive 8-inch extension
listed as used (see photos)
$21.45 incl. shipping OBO "buy now"

JS TECHNOLOGY (US) TWO EACH 1/2" drive x 10-inch extensions
listed as used (see photos) engraved (military surplus)
$12.00 incl. shipping OBO "buy now"

JS TECHNOLOGY (US) FIVE EACH 1/2" drive x 10-inch extensions
listed as used (see photos) engraved (military surplus)
$20.00 incl. shipping OBO "buy now"

==

VERMONT TAP & DIE (Lyndonville, VT) 2MS "Lucky" 25-piece SAE tap and die set in original box
used.
appears to be complete. I did NOT inquire of seller whether all components are original to the set.
this item got NO bids last time it was listed as an auction item ($18.83 + $10.95 shipping) the seller just relisted it as a "buy now OBO" deal:
$39.95 incl. shipping OBO "buy now"

CLEVELAND (US) No. 26 drill bit holder
very used
$14.99 incl. shipping "buy now"
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
* shipping costs may vary depending upon your location! *

EASCO (US) 7-pc 3/8" drive SAE crow foot set
9/16, 5/8, 11/16, 3/4, 13/16, 7/8, and 1 inch
slightly used
$17.85 + $10.40 expedited shipping "buy now"

New Britain (US) NBM25 1/4" drive RHFT ratchet (Kilness patent)
used
$17.95 + $4.45 shipping "buy now"
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
* shipping costs may vary! *

MATADOR (Germany) 8 pieces deep offset METRIC double-end box wrenches
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 27mm
used. dirty.
$149.95 incl. shipping OBO "buy now"

BLACKHAWK (US) GW 9997 1/4" drive RHFT flex-head ratchet
used
$24.95 incl. shipping "buy now"
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
** shipping costs may vary! **

INDESTRO 2736 3/8" drive flex-head ratchet (flat "paddle" handle) (52-tooth model, detent ball holds head in four positions)
used. nice shape.
$40. incl. shipping "buy now"
(* seller sent offer of $35. about an hour ago. *)

RAHSOL (Germany) 8 pc METRIC open-end wrench set
used. NOT polished. strictly utilitarian stuff here
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 and 22mm
$15.00 + $10.40 shipping now. 0 bids now. ends Weds. 02/08

INDESTRO & PROTO 47 assorted pieces
(see photos)
$35.00 + $17.10 shipping OBO "buy now"
 

Farmall450

Well-known member
Joined
Dec 23, 2011
Messages
13,356
Location
Marengo, Illinois
* shipping costs may vary depending upon your location! *

* just some items of interest -

TRW (made by Williams) 3-piece SAE flare nut wrench set
3/8" - 11/16" - 6-point openings
used. surface rust on openings
$14.99 incl. shipping now. 0 bids now. ends today at 18:50 PST

MILFORD (US) 9-inch mini hacksaw
brand new
$7.61 + $3.50 shipping "buy now"
(* seller sent offer of $7.00 *)

BLACKHAWK black plastic blow-mold box for 1/4" drive set (open center- no dividers)
used.
$9.99 + $5.99 shipping "buy now"

MILFORD (US) 45650 12-inch hacksaw
brand new
$22.40 + $8.95 shipping "buy now" (for one)
(* four or more: $15.68 each *)

PROAMERICA (US) 8-piece METRIC SHORT offset double-end box wrench set w/vinyl roll-up
6mm - 20mm
(* very nicely broached. these are NOT polished. they have a grainy, matte finish. I gave my set to a buddy who needed shorties. *)
listed as used (see photos - military surplus with low miles)
$24.95 + $10.60 shipping "Buy now"

PETERSEN DEWITT 4LN pliers
NOS
$16.99 + $5.99 shipping "buy now"

COMPARE prices online before clicking "buy now"

ICON (Taiwan ROC) 10-inch "parrot nose" pliers
used (see photos)
$15.99 + $7.99 shipping "buy now"

EZ-RED (Taiwan ROC) EZR-4SS8 "Quarter-Stick" 1/4" ratchet / bit ratchet
brand new
$28.97 incl. shipping "buy now"

KLEIN (US) D333-8 specialty pliers
listed as "unused"
$25.99 + $7.99 shipping "buy now"

WERA Wera 05007680001 Kraftform Plus 334 SK/6 Screwdriver Set and Rack, Lasertip
brand new
$45.88 incl. shipping "buy now"

WERA Wera 05105623001 Kraftform 300/7 Set 1 Screwdriver Set Kraftform Plus, 7 Pieces
brand new
$47.37 incl. shipping "buy now"

WERA 05073521001 Series 4 851/4 Z Screwdriver Bit, Phillips PH 2 x 89mm Blade
brand new
$6.72 incl. shipping "buy now"
Those Icon Pliers are $22 new in store.
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
^ I bought Malco Eagle Grips from Harry Epstein.

I'm going to post this here .... just because ....

James Smith screw plate (die stock) New Haven, CT. (patent 45459)
slightly used. very uncommon.
$25.00 + $10.40 shipping now. 0 bids now. ends Sun. 02/19
 

Attachments

  • patent 45459 Dec 13 1864 J. Smith.jpg
    patent 45459 Dec 13 1864 J. Smith.jpg
    115.1 KB · Views: 40
  • James Smith (New Haven CT) die stock (patent 45459)(ebay 354581455516 01).jpg
    James Smith (New Haven CT) die stock (patent 45459)(ebay 354581455516 01).jpg
    131.4 KB · Views: 43

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington

TEKTON SKT25201 52 Piece 10 to 32mm 1/2 Inch Drive 6 Point Socket Set w Ratchet​

52 pieces / plastic blow-mold box appears to have been damaged.
Currently running at about $200-$210 elsewhere online (new)
this one is slightly used - and the box is dented.
$139.38 incl. shipping OBO "buy now"

(* the same set shows up online for just under $40 bucks at a site called "XDC.com" but they appear to have gotten less than favorable reviews from consumer. YMMV *)
 

Schirmer

Active member
Joined
Aug 23, 2016
Messages
33
Hopefully someone will be kind enough to assist me.

How do I post a link to an ebay item on this forum, from the ebay app? Can I click on the items "share" button and copy it, then post the copied "share" link here? I'm trying to avoid posting a link that is non working and/or nonexistent.

I realize this is extremely basic elementary stuff. I used the forums search feature, but came up empty.

I'll be appreciative of any assistance that I can get.

Thanks
 

Wiz02

Well-known member
Joined
Jul 13, 2007
Messages
2,399
Location
Southeastern PA
@Schirmer, When you are viewing an item, on the top right hand side of the eBay app in betweenr the search icon, 🔍 and the shopping cart 🛒, is the share icon, click on that and scroll down to Actions, select copy link. Now back in this thread, hit reply and paste the link that you just copied into the reply text box. Hope this helps.
 

theoldwizard1

Well-known member
Joined
Feb 22, 2011
Messages
43,132
Location
SE MI
Looking for a nearly new desktop PC ? Shop eBay !

Just picked up an HP "home" desktop, minus monitor, keyboard and mouse for under $200 ! It came in the original box ! List (with keyboard and mouse) on Amazon as over $500 ! I got a deal on a 32" monitor before Christmas for under $150. It was thin on memory (only 4MB) but I had an extra stick.

These are HP TG01 or TP01 with AMD processors. The only difference between the 2 models is the front panel. The cool thing about them is you can easily upgrade to a Ryzen 5700G, max out the memory and it is not a bad low-end gaming rig !
 
To avoid these ads, REGISTER NOW!

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington

qqzj

Well-known member
Joined
Nov 28, 2017
Messages
3,747
TEKTON SKT05301 55-pc 1/4" dr. METRIC and SAE socket set in blow-mold box
looks complete.
listed as used. see the photos.
$63.00 incl. shipping "buy now"
Tekton is updating the 1/4 set by adding 15mm and the spinner will be usa made handle. I guess the old ones just become a bit less desirable?
 

Madjik Man

Well-known member
Joined
Dec 3, 2015
Messages
1,520
Tekton is updating the 1/4 set by adding 15mm and the spinner will be usa made handle. I guess the old ones just become a bit less desirable?

Yeah the only difference I see between the old set and new one is the standard and deep 15mm sockets and the spinner handle is their high torque handle vs the hard that came with the old set.
 

2manytools

Well-known member
Joined
Feb 2, 2016
Messages
4,331
Location
Mt Pleasant, MI
Tekton is updating the 1/4 set by adding 15mm and the spinner will be usa made handle. I guess the old ones just become a bit less desirable?

FWIW, the email I noticed the other day, was an update saying the spinner handle is molded in the USA, and the blade is made in Taiwan.
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
^ The earlier iteration of that set lacked the 4mm and 14mm sockets as well.... THAT was the set that I gave to my buddy.
The set I have here contains both the 4 and 14mm, but not the 15mm.
 

Andy1234

Active member
Joined
Jul 5, 2018
Messages
44
Location
St Louis

antman213

Well-known member
Joined
Nov 19, 2017
Messages
328
Your guess is as good as mine, the pic is not clear, so why don't you respond to the ad and find out?
Its a Reed 203-1/2" I got a call from the guy just after emailing 7am yesterday, which is honestly the most prompt person I've ever dealt with online LOL
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
these look pretty nice... be even nicer if the guy's willing to deal...

GEDORE (Germany) 15-pc METRIC combination wrenches (check out the length on these)
listed as used. not used.
8 9 10 11 12 13 14 15 16 17 18 19 21 22 24mm
$150.00 incl. shipping OBO "buy now"
 

xjfish

Well-known member
Joined
Feb 22, 2014
Messages
1,292
these look pretty nice... be even nicer if the guy's willing to deal...

GEDORE (Germany) 15-pc METRIC combination wrenches (check out the length on these)
listed as used. not used.
8 9 10 11 12 13 14 15 16 17 18 19 21 22 24mm
$150.00 incl. shipping OBO "buy now"
He accepted my offer of $130. Now i need to find a rack for these babies. Thanks for posting!
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
^ very cool. those looked really nice: extra long shanks. hope they serve well.

* posting this one only because it is so ridiculously cheap *

The ratchet on this unit is a dog. Coarse-tooth mechanism. Ungodly heavy. Poorly balanced. UGH!


NO NAME (China PRC) 46-pc 1/4" drive METRIC socket set with a mess of bits in a plastic box
4-14mm (includes 4.5 and 5.5 sockets)
brand new
it doesn't get any cheaper
$16.99 incl. shipping "buy now"
 
Last edited:

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
^ Don't buy that one! The ratchet is a dog. Blow a few more bucks and get the one with the better ratchet.

Duro/Indestro 8-piece METRIC "stubby" double-end box wrench set w/vinyl roll-up
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20mm
brand new

^ WhatChaMaCallItTools in Oklahoma City has a mess of these for $54.99 (incl. shipping).
(I did not pay that much, but I bought two of these and some other stuff at the same time and got a better price on all of it. YMMV)

THIS ebay seller has some he's dumping for $44.99 incl. shipping OBO
 

Madjik Man

Well-known member
Joined
Dec 3, 2015
Messages
1,520
^ Don't buy that one! The ratchet is a dog. Blow a few more bucks and get the one with the better ratchet.

Duro/Indestro 8-piece METRIC "stubby" double-end box wrench set w/vinyl roll-up
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20mm
brand new

^ WhatChaMaCallItTools in Oklahoma City has a mess of these for $54.99 (incl. shipping).
(I did not pay that much, but I bought two of these and some other stuff at the same time and got a better price on all of it. YMMV)

THIS ebay seller has some he's dumping for $44.99 incl. shipping OBO

Are those deep offsets? I already have a set of 45* but am looking for some deeper ones.
 

genog

Well-known member
Joined
Sep 4, 2021
Messages
2,001
Location
Silicon Valley
Duro/Indestro 8-piece METRIC "stubby" double-end box wrench set w/vinyl roll-up
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20mm
brand new

THIS ebay seller has some he's dumping for $44.99 incl. shipping OBO
As pointed out, that Seller accepts offers (y)
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,683
Location
Tacoma, Washington
@Madjik Man -
RE: "Are those deep offsets? I already have a set of 45* but am looking for some deeper ones."

I cannot answer that question.
That set doesn't appear in the catalogs I have.
They are definitely "offset".
I do know that Indestro's SAE double-end offset wrenches were touted as "45° offset".

Photo below. I don't know where mine are so I can't take a "sideways" shot.

If you're looking for super-deep, take a look at Elora, Stahlwille, or Hazet. I have a set of Eloras that seem a bit more radical than my SAE stuff. The Germans don't mess around when it comes to "offset".
 

Attachments

  • Duro Indestro 8-pc Metric short offset double-end wrench set (Ebay 254472282436 01).jpg
    Duro Indestro 8-pc Metric short offset double-end wrench set (Ebay 254472282436 01).jpg
    681.4 KB · Views: 27
  • Elora Metric offset double-end wrench set 112718 01.jpg
    Elora Metric offset double-end wrench set 112718 01.jpg
    382.5 KB · Views: 29
  • Elora Metric offset double-end wrench set 112718 02.jpg
    Elora Metric offset double-end wrench set 112718 02.jpg
    353.9 KB · Views: 25
To avoid these ads, REGISTER NOW!
Top Bottom