To avoid these ads, REGISTER NOW!

Electricians Chain Pliers

bob_the_builder

Well-known member
Joined
Apr 25, 2010
Messages
404
Does anyone know a good source for electricians chain pliers. I had a very old pair which has lost the spring and I would like to get a backup. When I search the web I only come across this one set which is sold by a few different companies.


Is this the only type that exists?

51KbPky195L._SL1024_.jpg


Bob
 
To avoid these ads, REGISTER NOW!

Beemer533

Well-known member
Joined
May 9, 2014
Messages
2,057
Location
Syracuse, NY
They are for opening/closing up chain links for things like chandeliers..

Those are the only type I have seen recently.
 

abk241

Well-known member
Joined
Aug 22, 2014
Messages
310
Location
SF Bay Area, California
Okay, so you lost the spring...
If you are anywhere near a good hardware store you will most likely find a usable replacement spring.
HD and Lowes don't carry an assortment like you would need. At least not in my area.
Mom & pop stores usually do.
 
To avoid these ads, REGISTER NOW!

signcrafter

Well-known member
Joined
May 9, 2012
Messages
12,359
I never even knew those existed and back in the day I put up hundreds of chandeliers working for an electrician. We just used two pairs of channel locks to spread the chain link and squeeze it back together. I ended up getting two extra pairs of channel locks and wrapping them with tape so they wouldn't scratch the chain.
 
OP
B

bob_the_builder

Well-known member
Joined
Apr 25, 2010
Messages
404
They are very handy since you can adjust the chain with one hand rather than using the two channellock method.

I know I could replace the spring but it would be nice just to have a second pair as well.

Bob
 

mickeyone

Well-known member
Joined
May 31, 2007
Messages
198
Location
northern NJ
Use one all the time ,much better than channelocks no where near the ammount of pressure is needed to spread chain. That pretty much is the style available at most electric suppliers or lighting shops.
 

signcrafter

Well-known member
Joined
May 9, 2012
Messages
12,359
They are very handy since you can adjust the chain with one hand rather than using the two channellock method.

I know I could replace the spring but it would be nice just to have a second pair as well.

Bob

That makes sense. I've only hung a handful in the last ten or so years after I got out of the sparky game but might have to pick one up.
 
To avoid these ads, REGISTER NOW!
Top Bottom