To avoid these ads, REGISTER NOW!

Entry door for a pole barn

NES

Well-known member
Joined
Dec 22, 2013
Messages
488
Location
Illinois
Having an entry door for a pole barn. Would you have it be in the front of the barn next to the garage door? Or have it on the side of the garage?
 
To avoid these ads, REGISTER NOW!

navycryppie

Active member
Joined
Oct 25, 2016
Messages
31
Location
Salem, OR
Shortest run from the house. I wouldn't do a window on the door, no need to give prying eyes a reason...:eyecrazy:
 

Attachments

  • IMG_20161111_151025626_HDR.jpg
    IMG_20161111_151025626_HDR.jpg
    151.1 KB · Views: 32

larry_g

Well-known member
Joined
Apr 28, 2007
Messages
16,892
Location
oregon
Lots of different reasons to have it one way or the other. What is the layout inside the building? As said above, shortest trip to the house. Me I put in the 48" wide door around the corner, but it allows me to move long stuff directly through the machine shop into the main garage. What you do in the building, work flow, people flow, and land layout all play in the reason of where to place the door. There is no reason to key the man door placement off the OH door. To many other things have a priority in dictating the placement.

attachment.php

The above is in my build thread below. The man door leads to the machine shop, and on through to the 'dirty' shop.

lg
no neat sig line
 
Last edited:

John in OH

Well-known member
Joined
Jun 2, 2007
Messages
2,444
Location
SE Ohio & Eastern Virginia
The entry door for my newest machine shed/pole barn is on end. But since the entire front of the shed is covered by three sliding doors there was no other practical location.

That being said, IMHO, the location of the entry door really makes absolutely no functional difference. Locate it in the most convenient access location from your house or driveway.

IMG_1308 (Medium).jpg
 
To avoid these ads, REGISTER NOW!

rieferman

Well-known member
Joined
May 18, 2009
Messages
2,586
Location
Collegeville PA (30 min west of Philly)
If you can place a door where it can nicely "nest" when in the open position, that's nice. Usually they swing inwards (else they can get whipped open by wind) so this nesting can help make efficient use of dead spots in your shop. Otherwise, no real rules that I can think of.
 

rburke65

Well-known member
Joined
Nov 10, 2007
Messages
12,349
Location
Canfield, Ohio
Well I placed mine where I can see it from the house....and my grade door swings IN. Try kicking that in some night....or day. But as said, it all opinion.
 

RPH

Well-known member
Joined
Dec 17, 2006
Messages
4,190
Location
Michigan Thumb
Where you don't have to shovel snow to get in. Nothing worse than snow sliding off the roof as you walk out. Yes, nature will wait for that moment.
 

eae197

Well-known member
Joined
Oct 27, 2016
Messages
1,100
Location
Utica, NY area
I have a 30W x 40L garage w/ 12w x 9h overhead door in the center of the gable end towards the house, the service entrance is centerered between the door and the south side of the garage swinging in towards the south wall. It has a window which lends itself well to see if someone comes to the house if the overhead door is down. My service door is a 32" door as I didn't feel a larger one was needed as the overhead door is right there. (a picture really is worth a 1000 words).
 
OP
N

NES

Well-known member
Joined
Dec 22, 2013
Messages
488
Location
Illinois
I'm leaning more toward having the entry door next to the garage door. Especially in the winter time. Or loading and unloading items into the garage.
 
To avoid these ads, REGISTER NOW!
Top Bottom