To avoid these ads, REGISTER NOW!

Epoxy floor tips and tricks...

Schwartzint1

Well-known member
Joined
Jan 14, 2014
Messages
46
Location
Metro Detroit
The PO of my home put an epoxy finish in the garage. I love the look. However.... This stuff is slicker than snot on a door knob when it gets wet. Also this winter its gotten very very dirty very quickly. I love the spring summer I can just blow the floor out with my compressor to clean. What are some tips and tricks from guys with epoxy floors on keeping some traction and keeping it clean? Thanks in advance guys.
 
To avoid these ads, REGISTER NOW!

Jsf721

Well-known member
Joined
Dec 23, 2012
Messages
4,129
Location
LI, NY
I had the contractor put shark grip in the top clear coat. Mine is easy to clean. I mop it 1x a year after the winter and blow it out with a leaf blower once and a while.
 
To avoid these ads, REGISTER NOW!

LegacyIndustrial

ALLIANCE MEMBER
Joined
Jun 7, 2010
Messages
7,995
Location
deerfield, IL
At this point, degrease, degloss, solvent wipe and coat with a clear or pigmented urethane. A "rounded" anti-skid product can be used. Our brand is Soft-Skid, there are others to choose from.

When done, your floor will be cleanable, walkable (bare feet) and looking very glossy still.
 
To avoid these ads, REGISTER NOW!
Top Bottom