- Location
- Tampa, FL
- Price
- Varies
I have a lot of stuff to sell, I will be adding to this thread as I get time to dig stuff up. Prices are minus shipping. Make an offer if you don’t like the price. I am located north of Tampa, FL and can meet from Tampa to Homasassa.
See Photos in Second Post
Dewalt DWM120 Portable Band Saw. $110 each Qty.4, 3 Left
May have paint or markings on it, fair shape. Will sell best to worst in order
of sale. Some have new blade tires where needed and/or new Dewalt or
Milwaukee blades. Will be in usable condition with no broken parts.
Dewalt DW328 Portable Band Saw. Very little use. Will come with blade $110
Old HeliCoil Kits $100 for all
3/4-16, 3/4-10, 5/8-11, 5/16-18, 3/8-16. May or may not be complete,
comes with all parts shown.
Hitachi NT50AE2 18ga Brad Nailer, Brand New in Box $45
Snapon TM831 1/4 Flex Ratchet $25, Sold Pending Funds
Chrome wear, chips, and scratches, works flawlessly.
Kobalt Flexzilla Knockoff 50ft air hoses, New $10 each, Qty.2
MAC Tools Slip Joint Pliers, New w/ minor marks, $12 each Qty 2
MAC Tools Extended Reach Pliers, New w/ minor marks, $12
Craftsman 18 Pipe Wrench, New Made in USA, $25
Kobalt 10" Aluminum Pipe Wrench, New $8
Kobalt 10" Adjustable Wrench, New, $5 each Qty. 2
Kobalt 20pc 1/4" Socket Set, New, Made in USA, $25 each Qty. 4
Craftsman 12pc 1/2" Socket Set, New Made in USA 9mm-21mm 6PT, $25
Snap on 1/4" Metric Socket Case, Dirty, 4mm-14mm, $12
Can include Craftsman 1/4" USA Socket set, most are new but a few were used a couple
times for $15 more
SK Impax Dead Blow Hammer Set, New with case, Made in USA $50
Proto 5853 3/4" to 1" Socket Adapter, New, $20
Speedout Screw Extractor Kit, New, $5
NAPA 2833 Engine Cylinder Hone, New, $15
Craftsman Evolv Pancake Compressor, Used, Good Condition, Includes spiral hose, $25
Make offer on the taps you need or all of them.
All of these taps are in great usable shape, most appear new. These are old taps and many have coloring and staining from storage.
Large Taps
1 1/4 - 16NS 6 Flute Vermont
1 - 12NF 4 Flute Butterfield
1 - 16 4 Flute - CAST ALUM Wood & Spencer
3/4 - 14NPT 5 Flute Morse
7/8 - 32NS 6 Flute - Brass Wood & Spencer
3/4 - 10NC 4 Flute Netco Chromclad
3/4 - 16NF 4 Flute Hanson
3/4 - 18NS 4 Flute - QTY 2 Pratt & Whitney
3/4 - 12NS 4 Flute - QTY 2 Pratt & Whitney
1/4 - 14NPT 4 Flute Spiral Spiral Tap
Extra Long Taps
7/16 - 14USS 4 Flute - 12" Long Winter
3/4 - 10NC 4 Flute - 10" Long S.T. Co.
5/8 - 11 4 Flute - 10" Long J.M. Carpenter
1/2 - 16 4 Flute - 10" Long Butterfield
1/2 - 12 4 Flute - 8" Long MorseTwist
7/16 - 14NC 4 Flute - 8" Long S.T. Co.
3/8 - 16 4 Flute - 8" Long, Minor galling from chuck S.T. Co.
3/8 - 16NC 3 Flute - 6" Long Sossner
8 - 32NC 2 Flute - 6" Long Card
8 - 32NC 2 Flute - 4" Long - QTY 2 Japan
10 - 32NF 2 Flute - 4" Long Japan
Japanese Taps
1/2 - 20NF 3 Flute - QTY 2 OSG HY-PRO
1/2 - 20NF 3 Flute Greenfield
3/ 8 - 24NF 3 Flute YMW
1/4 - 28NF 3 Flute Greenfield
10 - 32NF 3 Flute YMW
Taps
1/2 - 13NC 4 Flute Morse
7/16 - 14NC 4 Flute Morse
3/8 - 16NC 4 Flute Morse
3/8 - 16NC 3 Flute Morse
3/8 - 16NC 3 Flute Netco
3/8 - 16NC 3 Flute S.T. Co.
3/8 - 16NC 3 Flute LSI
3/8 - 16NC 3 Flute, Ti ANSER
5/16 - 24NF 4 Flute Hanson
5/16 - 24NF 2 Flute GTD
5/16 - 24NF 4 Flute ?
5/16 - 18NC 2 Flute GTD
5/16 - 18NC 4 Flute, ?RP Symbol Yugoslavia
1/4 - 28NF 2 Flute, Ti Vermont
1/4 - 28NF 4 Flute, ?RP Symbol Yugoslavia
1/4 - 20NC 4 Flute Morse
1/4 - 20NC 2 Flute GTD
1/4 - 20NC 2 Flute Macedonia?
1/4 - 20NC 2 Flute LSI
Med Tap Wrench General
Sm Tap Wrench Unknown
Sm Tap Handle Japan
Also have a box of drill bits, most are USA branded, some are new, most are used and many resharpened or dull. Some of the large ones are probably worth more by themselves than my price of $40
Sold Items
Irwin Hanson 117pc Tap set. Used in good shape. $100 SOLD
Missing 6-32, 10-24 taps. Has Craftsman 7mmx1, Greenfield 8-32. Missing
a couple smaller drill bits. The hinge that allows the pivot to come out
enabled the top to come off too easy. Upgraded the hinge, works great.
Fluke 87V – Used in Good Shape, with leads. Tested accurate with my 87V
and 179. $150 SOLD
Snapon TER6A 1/4 Torque Wrench TORQOMETER NM + IN.LB. Used Once, Like New $120 SOLD
See Photos in Second Post
Dewalt DWM120 Portable Band Saw. $110 each Qty.4, 3 Left
May have paint or markings on it, fair shape. Will sell best to worst in order
of sale. Some have new blade tires where needed and/or new Dewalt or
Milwaukee blades. Will be in usable condition with no broken parts.
Dewalt DW328 Portable Band Saw. Very little use. Will come with blade $110
Old HeliCoil Kits $100 for all
3/4-16, 3/4-10, 5/8-11, 5/16-18, 3/8-16. May or may not be complete,
comes with all parts shown.
Hitachi NT50AE2 18ga Brad Nailer, Brand New in Box $45
Snapon TM831 1/4 Flex Ratchet $25, Sold Pending Funds
Chrome wear, chips, and scratches, works flawlessly.
Kobalt Flexzilla Knockoff 50ft air hoses, New $10 each, Qty.2
MAC Tools Slip Joint Pliers, New w/ minor marks, $12 each Qty 2
MAC Tools Extended Reach Pliers, New w/ minor marks, $12
Craftsman 18 Pipe Wrench, New Made in USA, $25
Kobalt 10" Aluminum Pipe Wrench, New $8
Kobalt 10" Adjustable Wrench, New, $5 each Qty. 2
Kobalt 20pc 1/4" Socket Set, New, Made in USA, $25 each Qty. 4
Craftsman 12pc 1/2" Socket Set, New Made in USA 9mm-21mm 6PT, $25
Snap on 1/4" Metric Socket Case, Dirty, 4mm-14mm, $12
Can include Craftsman 1/4" USA Socket set, most are new but a few were used a couple
times for $15 more
SK Impax Dead Blow Hammer Set, New with case, Made in USA $50
Proto 5853 3/4" to 1" Socket Adapter, New, $20
Speedout Screw Extractor Kit, New, $5
NAPA 2833 Engine Cylinder Hone, New, $15
Craftsman Evolv Pancake Compressor, Used, Good Condition, Includes spiral hose, $25
Make offer on the taps you need or all of them.
All of these taps are in great usable shape, most appear new. These are old taps and many have coloring and staining from storage.
Large Taps
1 1/4 - 16NS 6 Flute Vermont
1 - 12NF 4 Flute Butterfield
1 - 16 4 Flute - CAST ALUM Wood & Spencer
3/4 - 14NPT 5 Flute Morse
7/8 - 32NS 6 Flute - Brass Wood & Spencer
3/4 - 10NC 4 Flute Netco Chromclad
3/4 - 16NF 4 Flute Hanson
3/4 - 18NS 4 Flute - QTY 2 Pratt & Whitney
3/4 - 12NS 4 Flute - QTY 2 Pratt & Whitney
1/4 - 14NPT 4 Flute Spiral Spiral Tap
Extra Long Taps
7/16 - 14USS 4 Flute - 12" Long Winter
3/4 - 10NC 4 Flute - 10" Long S.T. Co.
5/8 - 11 4 Flute - 10" Long J.M. Carpenter
1/2 - 16 4 Flute - 10" Long Butterfield
1/2 - 12 4 Flute - 8" Long MorseTwist
7/16 - 14NC 4 Flute - 8" Long S.T. Co.
3/8 - 16 4 Flute - 8" Long, Minor galling from chuck S.T. Co.
3/8 - 16NC 3 Flute - 6" Long Sossner
8 - 32NC 2 Flute - 6" Long Card
8 - 32NC 2 Flute - 4" Long - QTY 2 Japan
10 - 32NF 2 Flute - 4" Long Japan
Japanese Taps
1/2 - 20NF 3 Flute - QTY 2 OSG HY-PRO
1/2 - 20NF 3 Flute Greenfield
3/ 8 - 24NF 3 Flute YMW
1/4 - 28NF 3 Flute Greenfield
10 - 32NF 3 Flute YMW
Taps
1/2 - 13NC 4 Flute Morse
7/16 - 14NC 4 Flute Morse
3/8 - 16NC 4 Flute Morse
3/8 - 16NC 3 Flute Morse
3/8 - 16NC 3 Flute Netco
3/8 - 16NC 3 Flute S.T. Co.
3/8 - 16NC 3 Flute LSI
3/8 - 16NC 3 Flute, Ti ANSER
5/16 - 24NF 4 Flute Hanson
5/16 - 24NF 2 Flute GTD
5/16 - 24NF 4 Flute ?
5/16 - 18NC 2 Flute GTD
5/16 - 18NC 4 Flute, ?RP Symbol Yugoslavia
1/4 - 28NF 2 Flute, Ti Vermont
1/4 - 28NF 4 Flute, ?RP Symbol Yugoslavia
1/4 - 20NC 4 Flute Morse
1/4 - 20NC 2 Flute GTD
1/4 - 20NC 2 Flute Macedonia?
1/4 - 20NC 2 Flute LSI
Med Tap Wrench General
Sm Tap Wrench Unknown
Sm Tap Handle Japan
Also have a box of drill bits, most are USA branded, some are new, most are used and many resharpened or dull. Some of the large ones are probably worth more by themselves than my price of $40
Sold Items
Irwin Hanson 117pc Tap set. Used in good shape. $100 SOLD
Missing 6-32, 10-24 taps. Has Craftsman 7mmx1, Greenfield 8-32. Missing
a couple smaller drill bits. The hinge that allows the pivot to come out
enabled the top to come off too easy. Upgraded the hinge, works great.
Fluke 87V – Used in Good Shape, with leads. Tested accurate with my 87V
and 179. $150 SOLD
Snapon TER6A 1/4 Torque Wrench TORQOMETER NM + IN.LB. Used Once, Like New $120 SOLD
Last edited:
