Exhaust Flange

[Red Green]

I have been looking of a flange to fit an Exhaust manifold. It is a 68 or so Chevy Ram Horn Manifold. I just need the end with a couple inches of pipe. I know i have seen them but haven't had any luck finding them. I figure Napa or Advance should have them but I don't know what the name to look them up on their websites.

 

[larry_g]

Stop by any good muffler shop and have what you need made. The auto parts stores may have the flange but will not have the pipe without buying a full pipe made for some specific rig.

lg
no neat sig line

 

[N8]

Is it a 2 bolt flange or 3? I forget on the old rams horns.
Do you have the tools to make your own? I have to do that quite a bit with the cars I work with.
Plasma cutter, hole saw, whatever you can get your hands one. Just use 1/4" or better to avoid warping.
Around here our little auto parts places will have the flanges and various lengths of tubing but it is usually galvanized.

 

[lilredex]

If it resembles this style, have a look around the Walker site. Should be a fairly common piece.



Uploaded with ImageShack.us

 

[Red Green]

I got it. I went to the muffler shop and had the pipe made. Thanks guys