eye protection, goggles... what's good?

[FleaDog]

Are there any better products out there for eye protection? I mean most of my protective glasses and goggles are plastic and they scratch easily when you wipe them off/clean them and it gets on my nerves. something that is scratch resistant or more durable. wanted to see what people are happy with.

 

[silver2000]

Uvex s a top brand that lots of professional swear by. I never thought too much about it until I got a set with a tool package I bought and I was amazed how much clearer and well made they are. www.uvex.com Nice stuff!

 

[JasonTX]

If you want to make your eye protection last, always clean them wet. Never just wipe them off with a paper towel. I wet mine under running water, put a blob of dish soap on each lense and gently clean them with my fingertips. Rinse, then dry with a soft cloth, preferable a fresh one that hasn't been laying around gathering grit.

 

[VA5326]

Shooting glasses are great for eye protection. They can be a bit pricey, but you get why you pay for and they will last.

 

[Mr.N]

I just buy the cheap 3M in bulk one's every time they go on sale.
Replace them as it gets scratched.


it's so nice to have clean safety glasses

 

[Kevin54]

I wear Harley Davidson safety glasses. They wrap around and do a good job of keeping chips out. If they get gritty from metal dust, I'll run them under the faucet before cleaning them. If it's dust, I'll blow them off with the air hose before cleaning them.

 

[coffeebean]

i like mid range myself. bomber is my first choice. reasonable price, good selection, available at my local ACE hardware.

if you are looking goggles, I'd go ESS. you pay for what you get. they even have a trick pair with a fan in them so they don't fog(reportedly), and they have interchangeable lenses so you can get a tint if you are working outside that day.

dave

 

[Doug B]

I wear glasses,so it's hard to find saftey glasses that fit well. I use a snorkle mask like this- I cut the nose piece off.I keep them in a zip lock bag so they won't get scratched when I'm not wearing them.And I clean them just as JasonTX described.

 

[wssix99]

I have glass safety glasses similar to the Harley ones above (without the logos) and they work great. The lenses never get scratched like the plastic ones.

But... these are my favorite pair! (I use them for dustier work.)

I have only been able to find them offered from (former East Germany) German companies. Restoration Hardware sold them a few years ago, which is where I got mine. In Germany, they are offered with welders lenses and all kinds of tints.

 

[johonmirae]

I wet mine under running water, put a blob of dish soap on each lense and gently clean them with my fingertips.

 

[Journaler]

I use this most of the time: http://amzn.com/B0030FLD8A
If I'm working with nasty solvents etc, I wear these: http://amzn.com/B004EYOKWW

I used to wear shooting glasses, but wood chips etc would easily get between the glasses and my face, so I had to get protective eyewear that is appropriate to the tasks at hand.

 

[LutzTD]

I use the dewalt 2.0 magnifying cheaters, theyre cheap enough I buy a couple at a time so I have a spare. better than goggles over glasses which is what I used to do

 

[KPSquared]

I just buy whatever is cheap at the local supply place. I usually buy 5 pairs at a time so if they get scratched, I just toss them.

Rule #1. . .never wipe them dry, or with your breath, or with those stupid cleaning cloths soaked in cleaner. Run them under water then wipe with a micro-fiber. You're glasses will last a LOT longer this way.

 

[shanker]

I wear Harley Davidson safety glasses. They wrap around and do a good job of keeping chips out. If they get gritty from metal dust, I'll run them under the faucet before cleaning them. If it's dust, I'll blow them off with the air hose before cleaning them.

that's EXACTLY what I'm looking for but w/o the logo...know what brand they are?

 

[rumpity_z28]

I just use my welding helmet when I'm doing any grinding or if I'm using a saw for cutting wood ill use the uvex safety glasses I have. I like there 50/50's

 

[Angelfire]

I just use whatever glasses I have on hand. Uvex typically. If I'm grinding or such, I use a full face shield. Had too much happen to my eyes to take any chances!

 

[drmarkr]

If you want to make your eye protection last, always clean them wet. Never just wipe them off with a paper towel. I wet mine under running water, put a blob of dish soap on each lense and gently clean them with my fingertips. Rinse, then dry with a soft cloth, preferable a fresh one that hasn't been laying around gathering grit.

This. Plastic lenses will last a very long time if you simply show them some respect. NEVER wipe them with paper towels!!! That is a wood product and will scratch! Always use a clean, soft cloth, and ALWAYS use water.

 

[shooting4life]

I wear prescription glasses so I purchased oakley frames and got clear lenses. These are very tight fitting to my brow and my cheeks so it stops most things from reaching my eyes. I also have the same frame with prescription sunglasses.
This is an expensive option (the glasses costing around $200) but it is much better to me than wearing safety glasses over my regular glasses).

 

[ford33]

I purchased a pair of Dewalt DPG82-11c clear goggles and cannot recommend them. They always fog the lense regardless of the room temperature.

I use a pair of standard 3M safety glass from Mendards or Home Depot.

Here's a link to the Dewalt goggles that always fog the lense.

http://www.amazon.com/DEWALT-DPG82-11C-Concealer-Anti-Fog-Safety/dp/B000RKQ1NI/ref=sr_1_1?s=hi&ie=UTF8&qid=1359483483&sr=1-1&keywords=dewalt+goggles

 

[Coloshaver]

You get only one set of eyes. Keep 'em safe.

I've ordered from these guys: http://www.safetyglassesusa.com/

Lowest prices I've found and quick shipping.

 

[wssix99]

that's EXACTLY what I'm looking for but w/o the logo...know what brand they are?

That's a Uvex Tomcat. They make them in plane frames in addition to the model branded with Harley.

 

[NUTTSGT]

I picked up a couple pair of tinted ones at my local NAPA. I'm not sure of the brand but they are tinted for outside work. I have some clear ones in the garage but they are due to get replaced. I just need to find something that I like.

 

[casetractorfarmer]

So whats the best way to clean them

 

[OldNeons]

I bought a bunch of the Harley ones at a swap years ago. They are by far my favorite safety glasses. Comfortable, and snug to the face for much better protection than almost all the other glasses left laying in the drawer! I also use the tinted ones for my sunglasses. PS - the Harley on the frame scrubs off easily with a scotchbrite pad

 

[Fixnfly]

Thanks for all the replys! Now I need to narrow down all the choices.

 

[GRX]

If you want to make your eye protection last, always clean them wet. Never just wipe them off with a paper towel. I wet mine under running water, put a blob of dish soap on each lense and gently clean them with my fingertips. Rinse, then dry with a soft cloth, preferable a fresh one that hasn't been laying around gathering grit.

Agreed.
A paper towel is fine, provided things are clean. To expand on that, running the glasses under running water first removes particles that will scratch the lenses. Have seen many guys screw up their glasses after grinding all day by grabbing a grit covered rag which has been sitting out on the bench, then use that to rub in the grit which was already on the glasses to begin with.

 

[Aberdale]

I've been using motocross goggles. Lots of styles to choose from, and they seal well to my face to keep debris from getting behind the lens. I've been finding them on sale at motorcycle shops in the $10-20.00 range.

I especially like them for metal grinding or paint removal when using a knotted brush on a 4 1/2" grinder. I like them better than traditional safety glasses for lathe and mill work too.

'dale