Fastener bins.

[Mike Miller]

Bought this stuff from a friend that's moving, they are loaded. Don't know if two hundred was a good deal or not .

 

[Richard Cranium]

depends on what is inside the boxes, got Pics?

 

[Higgins]

The empty boxes are typically going for around $40 - $60 per box, based upon conditions...

AL

 

[Mike Miller]

depends on what is inside the boxes, got Pics?

There's a full assortment of fasteners, mostly for sheet metal and machine screws both stainless and plain steel. Two bins are stocked with both fine and course bolts from 1/4 to 1/2" of various lengths. Also one bin has screen door repair parts and a full assortment of rivets.

 

[Richard Cranium]

I purchased mine from an Ace Hardware store that was closing, got them for 5.00 per box, Boxes were at least 80 0/0 full, and if you bought enough to fill the metal rack (3 or 5) he gave you the rack...

 

[Richard Cranium]

it figures out that you paid just less then 5.75 a box so you didn't do bad. What brand are they? Mine are Hillman

 

[NUTTSGT]

It seems that $5/drawer is about the going rate when others have bought them. You gave a little more but helped a buddy out.

 

[Mike Miller]

it figures out that you paid just less then 5.75 a box so you didn't do bad. What brand are they? Mine are Hillman

Sharon

 

[shooting4life]

I picked my set up for $100, though it is empty. I am so happy to have these, they make keeping my modest hardware collection accessible.

 

[jeffmoss26]

I have a 5 drawer cabinet of plastic Jandorf trays.
The trays themselves cost me 2-5 bucks a piece and the cabinet was free (perks of working at a hardware store in HS/college!). I use them to store key blanks next to my key machine.

 

[SchillerM]

I purchased mine from an Ace Hardware store that was closing, got them for 5.00 per box, Boxes were at least 80 0/0 full, and if you bought enough to fill the metal rack (3 or 5) he gave you the rack...

Thanks for the pricing info.

This is an upcoming auction near me, might have to try and bid on a few..

Matt

 

[Richard Cranium]

stainless steel will go the highest then the metric, the empty and odd ball stuff will be at the last and cheapest... Rich

 

[Mike Miller]

I bought them for the hardware, it's a 16 mile round trip every time I need a widget.

 

[stage20]

I love hillman bins used to sell hardware but after 15 years the lids are comming off. Jandorf ones and servalite will do but some of them have to many dividers. That's the problem with all the clear plastic stuff the box store sells. 24 dividers is too much for me

 

[Richard Cranium]

stage20 pm me if you need a few replacement boxes. Where are you located?

 

[Outlander]

I picked my set up for $100, though it is empty. I am so happy to have these, they make keeping my modest hardware collection accessible.

 

[Richard Cranium]

shooting: What is behind the door on the top?

 

[shooting4life]

shooting: What is behind the door on the top?

It is just a cabinet with one shelf

 

[R6 Racer]

This is what we get offered up around here & it's not a bad deal either.
http://ontario.kijiji.ca/c-buy-and-...abinet-tool-storage-drawer-W0QQAdIdZ557087370

"fastener cabinet tool storage drawer
from the 60s and over all good shape with many compartments. heavy good sized unit with no contents"
Asking $80.00

So, what do you think? Is this a good deal or not? Around you I mean.

Steve

 

[Richard Cranium]

I have sold several of the 4 drawer metal units for 80.00, that is the rack and the 4 boxes.
Seams to be the going price here in central Washington...