To avoid these ads, REGISTER NOW!

Favorite brick and mortar store for hand tools.

dodge610

Well-known member
Joined
Aug 22, 2010
Messages
5,467
Location
North Canton Ohio
I have gone too Amazon and Home Depot for most things nowadays. Since sears went belly up and sent production over seas. And i cant get any tool trucks to stop at the house. I do run my small business out of the house. But they consider it a residental address. So wont stop.
 
To avoid these ads, REGISTER NOW!

BK13

Well-known member
Joined
Mar 1, 2013
Messages
2,692
Location
PDX, OR
I have a Tractor Supply opening nearby next month. I'm guardedly optimistic, but I am anticipating being disappointed with typical Chinese hand tool fare like all the other Farm and Ranch stores around here.
 

reynoj3

Well-known member
Joined
May 22, 2010
Messages
69
I live about 45 minutes from civilization so my tool purchases are mainly done online. At this point though I'm mainly getting specialty tools as required by whatever work I'm doing.

I tag and insure a couple spare vehicles so that my wife and I can still get to work when something is broke down and I'm waiting on parts or tools.

I do have access to a local lumber yard that sells some tools right down the road from me but they operate bank hours and are closed on the weekend. They are a Stihl dealer so I have needed to go to work late or come home early so I can buy Stihl equipment or parts. They have a guy who also services them but I haven't needed his services yet.

If I need something right now I usually **** it up and drive the 45 minutes to Home Depot or Harbor Freight.

Unfortunately I don't have better brick and mortar options.

Sent from my Pixel 3a XL using Tapatalk
 

PiperCub49

Well-known member
Joined
May 8, 2018
Messages
177
Location
Norfolk, VA
I have a Tractor Supply opening nearby next month. I'm guardedly optimistic, but I am anticipating being disappointed with typical Chinese hand tool fare like all the other Farm and Ranch stores around here.

If nothing else, they should have a good selection of Channellock and Mayhew.
 

damon18

ALLIANCE MEMBER
Joined
Jan 24, 2018
Messages
621
Location
Memphis, TN
Try Meijer...they carry Tekton. Not all of Tekton's stuff is US made but a lot of it is and they are a MI based company, as is Meijer. Meijer is opening new stores all the time.
We dont have them in Memphis but I'm visiting relatives in SW Ohio and I was surprised to see the Tekton display. The store was just like a Walmart Supercenter. 20191114_163527.jpg

Sent from my SM-G973U using The Garage Journal mobile app
 

toolmiser

Well-known member
Joined
Sep 1, 2009
Messages
1,657
Location
La Crosse, WI
We have very limited selection of tools in a city of 50,000. I don't know where I would look if I really wanted quality? Glad I have most of what I need.
 

m6z

Well-known member
Joined
Sep 13, 2019
Messages
2,325
Location
Missouri
It's all **** around here. I'm partial to Sears, but they'll be closing at the end of the year.

Once that happens I'll only have HF, Lowes, Home Depot and your typical auto parts stores like Napa and Auto Zone.

The only places I've bought tools in person in the last coupe of years has been Sears and Harbor Freight.
 

BDT/NWMN

Well-known member
Joined
Jan 22, 2012
Messages
3,762
Location
Erskine, Mn
My favorite and most respected store is Acme Tools in Grand Forks, ND. They are primarily a Dealership, with sales, parts and service of multiple lines of tools and equipment.

But: My visits are more frequent to Ace Hardware, L & M Supply, Menards, and Home Depot. I often end up at these places when fetching materials and supplies for projects; and browse thru the tool isles while there.

However: Over the last decade; the Internet and Brown Tool Truck have taken first place for most of My tool purchases.
 

dr_clyde

Well-known member
Joined
Jan 7, 2009
Messages
6,460
Location
Holland, MI
I buy a lot of tools from Lamb Industrial Supply here in town. They’re old school, have a bunch of old timers behind the counter who are local fixtures. They sell SK as the primary hand tools, but sell all of Snap-on’s Industrial brands like CDI torque, Bahco, Williams and such. They also sell some brands that are somewhat obscure or hard to buy locally like Garland Manufacturing, Wiha, Union Butterfield, Wilton, Dorian and PFERD. Power tools they sell Metabo, Milwaukee and DeWalt, among others.

I also like Production Tool Supply for machinist things, they’re a Michigan company, and I buy a lot of tools from the welding supply, Purity Cylinder Gases.

I rarely buy tools online. Between the above and the tool trucks I’m pretty set.
 

montanafordman

Well-known member
Joined
Feb 10, 2013
Messages
621
Location
Meridian, ID
My favorite and most respected store is Acme Tools in Grand Forks, ND. They are primarily a Dealership, with sales, parts and service of multiple lines of tools and equipment.

But: My visits are more frequent to Ace Hardware, L & M Supply, Menards, and Home Depot. I often end up at these places when fetching materials and supplies for projects; and browse thru the tool isles while there.

However: Over the last decade; the Internet and Brown Tool Truck have taken first place for most of My tool purchases.


I lived in Grand Forks, ND for seven years From 99-06. I loved going to Acme Tools and it was my first retail exposure to SK tools (we had a few on the farm that I had used). I bought my own first SK tools there (a 1/4 deep metric set) that I used to fix the idler pulley on my car. I have not been back to ACME tools since then, but looking on their website I"m disappointed they no longer carry SK..:( I wouldn't be surprised if they had a bad taste from the bankruptcy fallout and decided not to continue after Ideal took the reigns. They have a lot of quality stuff there and a nice store though.
 

BDT/NWMN

Well-known member
Joined
Jan 22, 2012
Messages
3,762
Location
Erskine, Mn
My favorite and most respected store is Acme Tools in Grand Forks, ND. They are primarily a Dealership, with sales, parts and service of multiple lines of tools and equipment.

But: My visits are more frequent to Ace Hardware, L & M Supply, Menards, and Home Depot. I often end up at these places when fetching materials and supplies for projects; and browse thru the tool isles while there.

However: Over the last decade; the Internet and Brown Tool Truck have taken first place for most of My tool purchases.

I lived in Grand Forks, ND for seven years From 99-06. I loved going to Acme Tools and it was my first retail exposure to SK tools (we had a few on the farm that I had used). I bought my own first SK tools there (a 1/4 deep metric set) that I used to fix the idler pulley on my car. I have not been back to ACME tools since then, but looking on their website I"m disappointed they no longer carry SK..:( I wouldn't be surprised if they had a bad taste from the bankruptcy fallout and decided not to continue after Ideal took the reigns. They have a lot of quality stuff there and a nice store though.

On a recent visit; I inquired whether they were going to stock the SK line again. The Salesman explained many customers have inquired, and Acme would like to resume stocking SK. The main problem is the warehouse and distribution system SK used beforehand declined any further involvement.
 

gtsgarage

Well-known member
Joined
Oct 31, 2017
Messages
482
Location
California
There is a place in the SF Bay Area called K-119. Their prices are high but the selection is unreal. It’s a crazy place to go. I just bought a Honda generator there and forgot how amazing the section is. They also service generators and power tools which is why I bought the generator there. There isn’t a guy in this sub forum who wouldn’t live to spend an hour or two just wandering around.
 

magicrat

Well-known member
Joined
Jun 18, 2015
Messages
323
I don’t really have one because quality is online. If u make me choose Home Depot because I can buy Klein pliers and Milwaukee power tools. But I stick to the Internet for cost reasons. However I take advantage of Black Friday every year :)
 

Minnesota Steve

Well-known member
Joined
Sep 24, 2019
Messages
72
Location
Minnesota
I'd say my favorite place to browse is Fleet Farm(farm supply in Minnesota, Iowa, Wisconsin).
It's a bit hit or miss though. They have a variety of cheap items and then they'll have some really good quality pieces. Like they have a Felo screwdrivers in packs and individual. They also have Bondhus, Channellock, Vise-grip and so on. For wrenches they carry Pro-Grade by Allied, and then they have Dewalt sockets sets as well as individual pieces.

Otherwise Menards and Home Depot. Occasionally Northern Tool or Harbor Freight(they're virtually identical).

Acme Tools mostly just has power tools and other things for the trades. They do have a lot of hand tools, but they really love their Dewalt and Milwaukee. Other tools they may have a few of but not a full lineup. Not much for wrenches and such. They may have a few Gearwrench sets, definately Dewalt sets, but I've never seen much besides small sets and no individual sockets, etc. Great place for disposable items like blades and such though, they have lot's of options there. And if they have a special sale you can really get a bargain.
 
To avoid these ads, REGISTER NOW!

jseymour

Active member
Joined
Nov 20, 2019
Messages
39
Location
S.E. Michigan
I'm blessed to have a couple good local tool stores: A place called Performance Line Tool Center and another called Marsh Power Tools. There's also a City Electric Supply nearby, and they have some tools. Beyond that it's Lowe's or HD's tool cribs. Possibly HF.

ETA: Production Tool Supply. Forgot about them. Reminded by dr_clyde in post #53
 
Last edited:

WittHay

Well-known member
Joined
Jan 6, 2016
Messages
2,157
Location
Surrey, BC Canada
There is a locally owned chain of stores called KMS Tools. They carry a lot of name brands.
 

Attachments

  • EAreWkWU0AEG05D.jpg
    EAreWkWU0AEG05D.jpg
    84.9 KB · Views: 30
  • KMS-Contest-640x318.jpg
    KMS-Contest-640x318.jpg
    62.1 KB · Views: 33
Last edited:

FigureItOut

Well-known member
Joined
Sep 14, 2015
Messages
3,267
Location
Bentonville AR
Other than the big boxes and HF, the only options in my area are supply houses, which usually have a limited, trade specific selection and high prices. I've had good luck being able to pick up something I needed at Grainger the same day, but there's not much browsing to do there of course. Oddly there is one supply house with a decent selection of stuff and okay pricing, and they specialize in doors of all things. For anything automotive specific, Napa or Bumper to Bumper sometimes have some passable versions of certain things, but rarely anything I'd buy if I could wait.
 

lardy1

Well-known member
Joined
Mar 17, 2019
Messages
3,406
Location
Michigan
There's nothing of interest around here. Home Cheapo, Lowe's, Tractor Supply, Meijers, etc. No place to buy domestic tools off the shelf around here. Those days are long gone.
 

stonesfan68

Well-known member
Joined
Apr 19, 2012
Messages
2,760
Location
Houston, TX
Empire Tools here in Houston has a big selection although the prices aren’t always the best at least you can handle the tool and use it the same day.
 

Tiny Jackson

Well-known member
Joined
Oct 22, 2007
Messages
170
Location
Schiller Park, IL
Berland's House of Tools.


Been a customer for decades but just now learned of their connection to SK (Sherman Klove).

From their web site:

A Tool Story

The Sherman family, owners of Berland's, got their start in the tool business in 1914 when Mason Sherman left the presidency of Birmingham Steel and teamed up with Roger Klove to create the S-K Wrench company. S-K was one of a handful of wrench manufacturers to survive the great depression. Mason’s son, William, and grandson, Dave, continued in the family’s wrench business.

Dave joined S-K in 1949 as a shipping clerk but soon convinced his bosses that he should be a salesman for S-K. By the late 1950s, Dave had also begun a side company with his uncle, selling tools out of the trunk of his car. This became a wholesale too company they named Clark-Hall, using each of their middle names. In 1960, Dave left S-K and moved Clark-Hall to Forest Park, a western suburb of Chicago. Dave began to see opportunity in retail and In 1969 bought a store on Chicago’s northwest side from Mae Berland, one of Clark-Hall's clients, .

At the time, Berland’s specialized in tools for the plaster, masonry, cement and trowel trades. Dave’s son, Dwight, upon graduating college, joined the company in 1974. Two years later, both Clark-Hall and Berland's moved to Downers Grove. Dwight saw the retail potential in Berland’s and greatly expanded the lines in order to cover more trades. Eventually Dave sold Clark-Hall and Dwight, with guidance and support from dad, turned Berland’s into the three location tool superstore it is now: a tool nut’s paradise, a carpenter’s candy store, a man’s best friend. Today, Dwight’s son Spencer and wife Janet are also key members of the company, ensuring that the family tradition continues. S-K wrenches are still sold at Berland's.

I know I am responding to an older post but this made me giggle. I have an SK ratchet that needed a rebuild kit so I went to Berland's House of Tools in Lombard(where I bought this particular ratchet nearly 25 years ago.) Surely I knew I might have a problem getting the kit when I went back to the repair area, which happens to be in the same area as the mechanics tools, where I saw a massive display of DEWALT ratchets, sockets etc. Old timer behind the counter confirmed no more S-K there despite Berlands history. He mentioned I would have to call Ideal to get warranty. Berlands is still the best brick and mortar I know and love to spend a few hours loitering there.
 

nbpt100

Well-known member
Joined
Oct 19, 2016
Messages
2,301
Location
Massachusetts
it use to be Sears. But now I have no loyalty to any one Brick and Mortar. I only buy a tool now if I have an immediate need and it helps me get a job done better, faster, or easier. Usually. Sometimes I fall prey to what I think is a good deal with no immediate need.

Where I buy all depends where I am . Time is more valualbe than driving down the street to save $5. If I need it and I see it and it is going to work, I buy it.
 
To avoid these ads, REGISTER NOW!
Top Bottom