Feel Tool...

[mofo62]

Ola ,I Orlando from Peru,adore this forum(awesome comunity of tool,aws forum,congratulations! .).work with trucks (Kenworth,International,Mack,Volvo,etc...* Eaton Fuller - Spicer - Rockwell) ,but I Need quality of tool,Im addict of GoodTools ,this is my way...I Love tools,i hate badtools ehhee

*next post alls my tools....


Today buy this for 60$ ,Im very Happy...

*Wright 8400 Ratchet, 30" Series 400 1" Drive

Feel Nat...

 

[flathead74]

My Wright ratchets make me feel pretty good too.

 

[Danglerb]

Welcome to the forum. That's and 1" to be proud of.

 

[billymade]

USA tools... YUMMY!

 

[TheGrooveking]

Great ratchet, I love my Wright stuff!

TheGrooveking

 

[mofo62]

.



Much Thanks for wish friends...


.



I Love this ratchet,strong.Facom awsm!

Facom Ratchet K151 Serie Camion 3/4

Feel Nat...

 

[mofo62]

.





Snap On : Puller - Bearing Separators







Today great day .buy this great Puller Snap On CJ84C (ugly box hehe) (Set, Puller, Bar-Type, Manual Tapped Hole, Basic, 10 Ton, 33" max. reach) + CJ951 (Bearing Separator, 4-1/2").Im Happy





*Snap On CJ84C

* Snap On CJ951

V!

 

[american lockpicker]

Nice tools! I like the Facom.

 

[mofo62]

.



Ola friends of Garage Journal



My new tools of this week ,Im excited...



*Armstrong - 22-906 - Ratchets - 1" dr ratchet 30"black

next days My...Snap On . Torque Multiplier of 3200 lbs



V!

 

[american lockpicker]

Nice.

 

[Lump]

Welcome to the Garage Journal forum. NICE TOOLS too!

 

[mikevango]

Snap on, wright, Armstrong, and facom. You do like good tools. Welcome to the garage journal.

 

[Hank McMauser]

are you repairing wristwatches?..............LOL

 

[diesel research]

I think I would be pretty frustrated if I ever found myself needing a 1" drive ratchet.

 

[Wrenches of Death]

I think I would be pretty frustrated if I ever found myself needing a 1" drive ratchet.

It is better to have, and need not, than to need, and to have not.

Man, I haven't used THAT quote in decades...

What do you use when the compressor is down? Or, if you can't get a truck with air within a hundred yards of the job?

WoD

 

[diesel research]

What do you use when the compressor is down?

A torch usually.

Or, if you can't get a truck with air within a hundred yards of the job?
WoD

A tow truck. (or see above)

If it requires 1" drive, it likely requires much more torque than I want to apply to a 30" bar. Also likely has space constraints against cheaters.

Before, I was using 1" IR-TI typically on bolts torqued to several thousand pounds. The gun would run them down to save time with the hydraulic wrench and prevent the need for a backup wrench. Never had the power to loosen though. Burn the bolts off.

Now that I am back into the truck world, the 1" or #5 spline guns get used constantly, but pretty much only for lugs. Not a job I would want to do with a ratchet. If I did have to use a ratchet, I would be highly frustrated as mentioned above.

__________________________________________

As the drive size goes up, the usefulness of a ratcheting mechanism greatly decreases. Maybe a point of diminishing returns. I rarely ever find myself using any ratchet over 1/2" drive (excluding hub nuts), simply because required torque is often so great. Larger ratchets had more use before, when socket size range was less.

 

[TireTracks]

Those are some big ratchets.

How much does that Wright weigh?

 

[mofo62]

.



Ola Friends much Thanks f Welcome

Ah Dates of *Wright 8400 Ratchet, 30" Series 400 1" Drive

Size 30"
Weight 7.73
Overall Length 30"
Header Text Drop forged, one-piece handle. Handle design allows operator to "feel" the fastener. Precision-machined 45 tooth head gives long life and short arc swing. Kit is easily removed for cleaning or replacement

Dates of *Armstrong - 22-906 - Ratchets - 1" dr ratchet 30"black





*More Pictures...

"Comfort grip" handle
Recessed reversing lever
"On-Off" indicating lever
Drive Type: Male Square
Locking Type: Ball
Material: Cold Formed Steel

Item: Dimensions: Weight:
Ratchets - 1" dr ratchet 30"black Unavailable 10.65 lbs

*Snap On - L53 Sliding T-Handle, Complete, 30"




Dates...*

Brand Snap-on
Country Of Origin USA
Finish Chrome
Description Sliding T-handle
Handle Stock No. L53HB
Sliding Head Only Stock No. L53A
Dimension B, Head Depth, inches 2
Dimension C, Overall Length, inches 29

Feel Nat...

 

[Wrenches of Death]

The gun would run them down to save time with the hydraulic wrench and prevent the need for a backup wrench.

I didn't know that these had gotten to the point where there were man portable. I saw a truck mounted one years back. I just did a few searches and see that now you can get a unit that you can carry that's good for 6500ft.lbs.

Technology advances!

Yeah, that sure beats the hell out of a ratchet.

WoD

 

[mofo62]

.




I Love this tool ,for me its totally Awesome,but too expensive






*Snap On - Yay393 - Torque Multiplier, Geared Head, Bar Reaction, 3200 ft. lb. Output

V!

 

[Lump]

I'll bet that, in Peru, there are not so many big tow trucks and portable equipment resources available. I've never been there, but that is the way things are in most of Latin America, by my experience.

Nice tools, Mofo62! Welcome.

 

[mofo62]

.


Thank you very much, if hard to find good tools, and are expensive in Peru, but me like to have good tools, soon I have my own truck shop. My Tops 12 :

1.Snap On
2.Proto
3.Wright
4.Armstrong
5.Facom
6.Hazet
7.Indestro
8.Stahlwille
9.Swinborne
10.Cornwell
11.Williams
12.Craftsman


Greetings from Perù

V!

 

[Lump]

Very nice! And most all of us Garage Journal members here in the USA have extra tools lying around. So let us know if you need anything special. Maybe we have a used one like the one you want, and you can get it cheaper!

Bueno suerte, mi amigo!

 

[mofo62]

Very nice! And most all of us Garage Journal members here in the USA have extra tools lying around. So let us know if you need anything special. Maybe we have a used one like the one you want, and you can get it cheaper!

Bueno suerte, mi amigo!

Muchas Gracias amigo Lump



and Muchas Gracias Garage Journal forum ,Best!!!!!!!!

V!

 

[Lump]

Por favor... Espanol esta muy deficil para mi.
Anglais esta facil. ?Okay? Buenvenidos, amigo!

 

[mofo62]

.



I Love Armstrong.i love this socket





*Armstrong Tool - 21-016 Socket Impact 3/4Dr 6Pt 1/2

V!

 

[Lump]

Wow, what a super-heavy-duty old socket. LOVE it!

 

[greasemonkey44]

Wowza a 3/4 impact socket for a ~13mm bolt?
wouldnt that just shear the head off? or do the 1/2 bolts just pull them selves outta there from the intimidation of that monster socket?

 

[mofo62]

Wowza a 3/4 impact socket for a ~13mm bolt?
wouldnt that just shear the head off? or do the 1/2 bolts just pull them selves outta there from the intimidation of that monster socket?

Ola amigo Lump

Yay GreaseMonkey




*Armaloy...

V!

 

[TireTracks]

Now thats a socket!

 

[mofo62]

.




I wanna Snap On adaptader soon.but Genius its good...



*Genius - 841006b - 1-inch to 3/4-inch Impact Adapter



Made of Chrome Molvbdenum Steel

V!

 

[mofo62]

.




Ohh nòstalgia,Ohh Swinborne...



*Swinborne - Extension 1/2" - D5P

V!

 

[T56 Impala]

That Armstrong ratchet reminds me a lot of the old Plomb ratchets.

I had completely forgotten about Swinborne! Whatever happened to them? Good tools.

Oh, and welcome! Keep up with the pictures!

 

[mofo62]

That Armstrong ratchet reminds me a lot of the old Plomb ratchets.

I had completely forgotten about Swinborne! Whatever happened to them? Good tools.

Oh, and welcome! Keep up with the pictures!

.I think that Swinborne best tools of U.k ,but no more products.my extension of 1/2 its strong!Great Swinborne



Ah Armstrong ohh Best Tools.Strong!!!


...Soon pictures of my Armstrong extension of 1"

V!

 

[Lump]

Wow, never heard of Swinborne. That extension looks great!

 

[mofo62]

.


Yay Lump.Swinborne its great...





*Husky - Hammer

V!

 

[Lump]

Hammer? I don't see a hammer? But NICE photo of the girl. Hahahaha!

 

[Rus Bear]

My tools.

 

[Rus Bear]

My tools:

1.Williams
2.Proto
3.Koken
4.Tohnichi - torque wrenches

 

[mofo62]

My tools:

1.Williams
2.Proto
3.Koken
4.Tohnichi - torque wrenches

Nice tools,Welcome.greetings from Perù.

Hammer? I don't see a hammer? But NICE photo of the girl. Hahahaha!

Hahhaha Lump but she its so beautiful...

V!