Felo tools

[ash95608]

Just to be clear, we also divide these prices in half?

Yes that is correct.

 

[jvitez]

Email sent with my order. Many thanks!

 

[zer0cell]

If only NWS had a similar promotion going!

 

[firworks]

I sent an email too.

Here's what I ordered for anyone curious:
Felo Item No 61479 - Adapter for sockets 1/4"
Felo Item No 53523 - 3/16” x 3 1/2” | 1/4” x 5” 552 PH 2 x 4” Series 550
Felo Item No 32370 - PH 3 x 6" Series 552
Felo Item No 32362 - 1/2" x 8" Series 550

I decided to take macgee up on his suggestion to check out the Felo version of the chiseldrivers.

 

[Vortaku]

I sent an email too.

Here's what I ordered for anyone curious:
Felo Item No 61479 - Adapter for sockets 1/4"
Felo Item No 53523 - 3/16” x 3 1/2” | 1/4” x 5” 552 PH 2 x 4” Series 550
Felo Item No 32370 - PH 3 x 6" Series 552
Felo Item No 32362 - 1/2" x 8" Series 550

I decided to take macgee up on his suggestion to check out the Felo version of the chiseldrivers.

I am getting a set of the 550s myself! so pumped

 

[dillon_b12]

I may just be missing it, but what is the difference between the 50174 and 53521 sets?

Also, is the 500 series handle similar in construction to the Ergonic handle? Is the main difference between the 500 series and Ergonic just the hex shaft vs. round?

 

[firworks]

Just paid my invoice! Now the waiting game begins...

 

[Vortaku]

Just paid my invoice! Now the waiting game begins...

Goodluck, it is driving me nuts

Sent from my ONE A2005 using Tapatalk

 

[tempdisj]

I sent an email too.

Here's what I ordered for anyone curious:
Felo Item No 61479 - Adapter for sockets 1/4"
Felo Item No 53523 - 3/16” x 3 1/2” | 1/4” x 5” 552 PH 2 x 4” Series 550
Felo Item No 32370 - PH 3 x 6" Series 552
Felo Item No 32362 - 1/2" x 8" Series 550

I decided to take macgee up on his suggestion to check out the Felo version of the chiseldrivers.

I just placed a similar order:

32362 550 Screwdriver Flathead 1/2”
22155 335 Screwdriver set 5 pcs.
32350 338 T-handle Hex Bit Holder
61479 497 Adapter for sockets 1/4"

 

[ash95608]

I may just be missing it, but what is the difference between the 50174 and 53521 sets?

Also, is the 500 series handle similar in construction to the Ergonic handle? Is the main difference between the 500 series and Ergonic just the hex shaft vs. round?

No difference between 50174 and 53521 just the packaging.
500 has a ********* and the 400 has a soft core, they both offer hex shafts.

 

[ash95608]

bump for those who have not seen this yet

 

[ash95608]

bump for those who have not seen this yet

 

[firworks]

Any idea when the orders already placed might be heading out?

 

[marshak]

Just put my order in and paid invoice. I think I'll be good on screwdrivers for quite a while.

Thanks Ash

 

[Waltc]

Does this offer stand for international orders? If it does, what's the best way to work out shipping?

 

[signcrafter]

I need to get my order together. Been putting it off, think because there is so many choices!

Need to get some new screwdrivers for home electrical work so going to get a regular set and also an insulated set. Any suggestions on which lines to go with?

Also for the price and all the good reviews I'm going to pick up a new set for car repair in the garage. And some odds and ends to keep in other tool boxes.

Anyone have experience with the hex bits? I may have to stock up on them to because most of what is available local is garbage.

 

[ash95608]

Any idea when the orders already placed might be heading out?

already shipped and should have gotten a email about tracking details. Should be there today or tomorrow. Thanks.

 

[ash95608]

Does this offer stand for international orders? If it does, what's the best way to work out shipping?

Yes, I can do DHL express or USPS.

 

[ash95608]

I need to get my order together. Been putting it off, think because there is so many choices!

Need to get some new screwdrivers for home electrical work so going to get a regular set and also an insulated set. Any suggestions on which lines to go with?

Also for the price and all the good reviews I'm going to pick up a new set for car repair in the garage. And some odds and ends to keep in other tool boxes.

Anyone have experience with the hex bits? I may have to stock up on them to because most of what is available local is garbage.

these are my favorite sets

53167
50707
53169

 

[Sanddancer]

You mention sockets in the OP, but I couldn't see any in the catalog? I saw socket sets with ratchets starting at p116, but the pdf only went to p115.

 

[ash95608]

You mention sockets in the OP, but I couldn't see any in the catalog? I saw socket sets with ratchets starting at p116, but the pdf only went to p115.

I just checked the pdf it goes to page 174, maybe try reloading it

 

[Hephaestus29]

I'd like to have a nice set of T handled
allen wrenches, metric and standard.
Do you have any of those that you know
of without me scrolling through every
page ? Thanks H.

 

[Hephaestus29]

I'm at work now so maybe I'm not seeing
all the search options on my phone.
I'll try it when I get home.

 

[ash95608]

I'd like to have a nice set of T handled
allen wrenches, metric and standard.
Do you have any of those that you know
of without me scrolling through every
page ? Thanks H.

I would suggest one of the smart box sets on page 125, the only actual t-handles they are torx version on page 115

 

[BMack37]

Received my order today, damn it...this Felo stuff is nicer than I thought. I really wish I had gone with the Felo set of screwdrivers over the single Felo PH2 and a set of the Wera that everyone is always talking about. I may be placing another order.

I received a T Handle bit holder and it's the nicest bit holder of any kind I have seen. I recommend picking one up or at least picking up one of their magnetic bit holders. This is actually strong enough to hold screws firmly on the bit you're using...normally, they magnetize enough to barely be able to move a screw on a flat surface. It actually magnetizes as strong or stronger on a 2.5" bit that the average bit holder. Also, you can just tell it's EXTREMELY high quality, the T Handle for $6 is a STEAL. If I would have paid retail plus shipping I'd still consider it a deal.

 

[Hephaestus29]

Hey I have a question about 50042 & 44
Pincers. Are there any better pics of the
cutting area of the jaws ? My dad uses
some similar in luthier work for clipping
off excess fret material from the necks
of the instrument. I need to know if the
cutting edge is right at the surface or
face of the tool or is it slightly recessed
with a beveled edge ? Thanks

 

[ash95608]

Hey I have a question about 50042 & 44
Pincers. Are there any better pics of the
cutting area of the jaws ? My dad uses
some similar in luthier work for clipping
off excess fret material from the necks
of the instrument. I need to know if the
cutting edge is right at the surface or
face of the tool or is it slightly recessed
with a beveled edge ? Thanks

I will take a picture for you tomorrow, but I believe they are recessed in with a beveled edge.

 

[ash95608]

Hey I have a question about 50042 & 44
Pincers. Are there any better pics of the
cutting area of the jaws ? My dad uses
some similar in luthier work for clipping
off excess fret material from the necks
of the instrument. I need to know if the
cutting edge is right at the surface or
face of the tool or is it slightly recessed
with a beveled edge ? Thanks

Here are the pictures.

 

[Hephaestus29]

I suppose I could grind them down for
that price.

 

[ash95608]

By the way the felo vde pliers are made by nws.

 

[firworks]

I got my Felo items from ash95608. Packed well and all looks very good. I should have bought more stuff.

 

[ash95608]

bump

 

[BMack37]

Not a whole lot of time left to take advantage of Ash's generosity. I actually placed two orders, the second should show up tomorrow. Was pleasantly surprised with the quality of Felo tools and at these prices it was a steal.

Please guys, let's thank Ash for the deals he's posted by taking a moment to give him an honest review of your experience with him. He hasn't asked me to post this, but I just posted my review and saw that he only had a couple of vendor reviews. I manage a small business and reviews are a big deal to drive business. Here's a link to the german-hand-tools vendor review thread: http://www.garagejournal.com/forum/showthread.php?t=231025

 

[ricleh]

I went and saw Ash today and picked up the items I ordered. I'll post some pictures this week. As always, Ash is a great guy to buy tools from.

 

[Itinerant]

I received my order a few days ago, very pleased with the tools and with my experience dealing with Ash. Thank you Ash for this generous offer.

 

[George in Rancho Cordova]

ricleh:

I must have just missed you, as I picked up my order around 2:30 yesterday.
Were the tool boxes in his pickup for you?

George in Rancho

 

[esvee]

Just spotted this thread and oh man am I excited. You said "end of december" - are we basically good until midnight on the 31st?

Figured I'd double check to make sure I wasn't inconveniencing such a generous offer by taking my time.

 

[ricleh]

ricleh:

I must have just missed you, as I picked up my order around 2:30 yesterday.
Were the tool boxes in his pickup for you?

George in Rancho

I left at about 2:00. The tool boxes were not for me. I don't have any room for more toolboxes. This is my garage.

 

[ash95608]

Just spotted this thread and oh man am I excited. You said "end of december" - are we basically good until midnight on the 31st?

Figured I'd double check to make sure I wasn't inconveniencing such a generous offer by taking my time.

it would have to be before 12 noon on the 31st. Thank

 

[ash95608]

Merry Christmas everyone, only 6 days left on this deal. Let me know as soon as you can if interested.