Felo tools

[BMack37]

The only thing I wasn't extremely happy about was the precision screwdriver case, it's flexible plastic which is good but it's a little flimsy. The tray inside also feels kind of cheap and comes out when I pull the driver closer to the hinge. I had bought an extra phillips size so I knew the case wasn't going to work anyway, found this canvas tool pouch on ebay: http://www.ebay.com/itm/361443513649?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

Now it looks and works like the Wiha roll-up set but cheaper because of Ash's sale.

Easy to read sizing when pushed fully into the pouch:

If you bought the precision set, I highly recommend buying the tool pouch I linked to on eBay.

 

[marshak]

Just received my second order from Ash. Everything arrived quickly and well packaged

 

[firworks]

Just received my second order from Ash. Everything arrived quickly and well packaged

Holy cow. You bought everything!

I'm really considering sneaking in a second Felo order before the time is up. I really like the 550/552 screwdrivers I got.

 

[marshak]

I know. I had a bunch of old garbage drivers and figured I would correct it all at once. I also bought two more sets of the red handled screwdrivers for my desk and mobile kit.

 

[esvee]

Just sent in my order. Excited for my mini ratchet, 12" drivers, and a few other goodies.

 

[FEVERinc]

Just received my second order from Ash. Everything arrived quickly and well packaged

uh... can you just e-mail me your order form so I could send it to ash too?! lol

 

[BMack37]

Just sent in my order. Excited for my mini ratchet, 12" drivers, and a few other goodies.

The mini ratchet is a fantastic little ratchet, it is tiny but it is smooth. You can literally make it ratchet by just pushing on the back of the head and turning the handle.

Size comparison

 

[hautpot]

Cant wait for my order! The suspense is killing me

 

[FEVERinc]

I really just don't know what series screw drivers to get.. but I need to hurry up and pick one so I can get the entire set lol.

dang my luck for just now seeing this

 

[firworks]

I really just don't know what series screw drivers to get.. but I need to hurry up and pick one so I can get the entire set lol.

dang my luck for just now seeing this

Get either the 410/412 which is the Felo Ergo with soft comfort grips, or get the 550/552 which are strikeable chiselable heavy duty drivers with soft but not quite like the Ergo grips. They have hex bolsters for using a wrench to turn the driver while bearing down on it, and steel striking caps on the back of the wrench.

Felo 410/412 Ergos:

Felo 550/552:

I like the feel of the 550/552 a little better because I don't quite like how squishy the Felo Ergos are but they are still a very nice driver.

 

[BMack37]

I like the squishier drivers...keep in mind it's not super squishy, but it is softer than any other screwdriver I've seen. It doesn't squish without actually gripping it decently hard, it's not like gel insole soft. It's like the density of Crocs.

 

[firworks]

I like the squishier drivers...keep in mind it's not super squishy, but it is softer than any other screwdriver I've seen. It doesn't squish without actually gripping it decently hard, it's not like gel insole soft. It's like the density of Crocs.

But considerably more fashionable.

 

[FEVERinc]

Im slowly copying over stuff now... I'm still trying to add all of the precision drivers. Haven't even made it to the regular ones yet.

 

[firworks]

I took this for another thread but figured it was relevant to this one. The Felos and the Wera Insulated Handle and Blade kit are from Ash's sale.

Can't go wrong with German screwdrivers!

 

[FEVERinc]

looks like an awesome set up.. I'm gonna have to call it a night. I have an install tomorrow morning then planning on taking off to Atlanta for the weekend by noon. If I can't add anymore I'm just gonna send what I have right now. Tired of having mismatched stuff. Just want one complete set of something from one manufacturer.

 

[FEVERinc]

Never mind.. found it

 

[firworks]

Never mind.. found it

Looks like 507 is Tamper Resistant Torx and 508 is normal Torx.

Here's a good reference for Felo's different series:
http://www.carbideprocessors.com/felo/series-200-polypropylene-handle-screwdrivers/
http://www.carbideprocessors.com/felo/series-300-t-handles/
http://www.carbideprocessors.com/felo/series-400-ergonic-screwdrivers/
http://www.carbideprocessors.com/felo/series-500-frico-and-m-tec-screwdrivers/
http://www.carbideprocessors.com/felo/series-800-economy-line/

 

[FEVERinc]

Looks like 507 is Tamper Resistant Torx and 508 is normal Torx.

Thanks for all of your help

 

[BMack37]

But considerably more fashionable.

Definitely haha


Feverinc, I definitely recommend buying as much as you're comfortable spending. I placed my first order and immediately regretted only buying what I did the first go around, I had another order within a week that doubled the size of my original order. Felo's tools are top notch, I've been very impressed with everything except the case on the precision screwdriver set. I was shockingly impressed by the T handle bit holder, it's fantastic...all their bit holders are much higher quality that you get from HD or Lowe's. I also really like the super small size on their stubby screwdrivers. I do now kind of regret not buying some of the pliers though I don't really have a need for them since I stocked up on Knipex. Hope you get your order in on time.

 

[FEVERinc]

Definitely haha


Feverinc, I definitely recommend buying as much as you're comfortable spending. I placed my first order and immediately regretted only buying what I did the first go around, I had another order within a week that doubled the size of my original order. Felo's tools are top notch, I've been very impressed with everything except the case on the precision screwdriver set. I was shockingly impressed by the T handle bit holder, it's fantastic...all their bit holders are much higher quality that you get from HD or Lowe's. I also really like the super small size on their stubby screwdrivers. I do now kind of regret not buying some of the pliers though I don't really have a need for them since I stocked up on Knipex. Hope you get your order in on time.

I emailed ash for over $600 worth. Figured this would get me started. Mostly all the precision stuff and the 550 series. I got the smart t handle because that thing just looks awesome. This game out of my flooring budget but I couldn't pass up on the deal. Guess I'll have to go with something cheaper on the floor of the new shop.


Sent from my iPhone using Tapatalk

 

[misterdobalina]

You working today Ash? Is this deal still on?

 

[firworks]

You working today Ash? Is this deal still on?

I hope so, sounds like he's got a huge sale to make!

 

[FEVERinc]

He said the orders should be to him by noon. I emailed him. Hoping it didn't go to his spam folder. I just wanted to confirm the totals before I sent him PayPal founds


Sent from my iPhone using Tapatalk

 

[BMack37]

I emailed ash for over $600 worth. Figured this would get me started. Mostly all the precision stuff and the 550 series. I got the smart t handle because that thing just looks awesome. This game out of my flooring budget but I couldn't pass up on the deal. Guess I'll have to go with something cheaper on the floor of the new shop.


Sent from my iPhone using Tapatalk

Definitely too good of a deal to pass up, well done. I almost bought the smart t handle because it's a neat design but the bit holder is more useful to me. Hope you are as happy as I am

 

[misterdobalina]

He said the orders should be to him by noon. I emailed him. Hoping it didn't go to his spam folder. I just wanted to confirm the totals before I sent him PayPal founds


Sent from my iPhone using Tapatalk

I beat that deadline. Fingers crossed.

 

[esvee]

Same here, he said we pay what he pays for shipping, so I didn't want to short-change him and just pay up front. Waiting for an invoice I guess.

 

[FEVERinc]

I just got a reply. Sounds like he is doing the invoicing now. Who hoo!


Sent from my iPhone using Tapatalk

 

[ash95608]

did everyone get there invoices? I had a lot at the last minute just want to make sure I got eveyone

 

[FEVERinc]

did everyone get there invoices? I had a lot at the last minute just want to make sure I got eveyone

I just shot you an email about mine. Sorry for my order being last minute. I just saw the thread last night and worked on my order immediately. Had I seen it sooner I would have jumped on the amazing offer


Sent from my iPhone using Tapatalk

 

[signcrafter]

Been busy all week and came to place my order by the end of the 31st but looks like it was cut off at noon. Guess I missed out. Was looking forward to trying some felo screwdrivers out but guess not this time. That's what I get for waiting till the last minute but had a kid this week so screwdrivers dropped to the bottom of the priority list.

If anyone got the insulated screwdrivers let me know how you like them.

 

[tjpavlov]

Just sent a last minute order. Home I'm not too late! Thanks so much, Ash!

 

[firworks]

I just got a reply. Sounds like he is doing the invoicing now. Who hoo!


Sent from my iPhone using Tapatalk

Make sure to share some pictures when your monster order comes in!

 

[FEVERinc]

Got my invoice and paid him. Can't wait for it to come in


Sent from my iPhone using Tapatalk

 

[tjpavlov]

I got an invoice almost immediately from Ash. Paid via paypal and now I just have to wait for the goods to arrive. Thanks, Ash, for doing this. I've always been curious about the Ergonic line of Felo tools. Can't wait for my order!

 

[rodsnratfinks]

What a great deal. I'm a little ashamed I missed it, but it's probably for the best.

Sent via homing pigeon using methamphetamines

 

[Roddyo]

What a great deal. I'm a little ashamed I missed it, but it's probably for the best.

Sent via homing pigeon using methamphetamines

It was a great deal.....and I missed it also. There's always next year. A big thanks to everyone who puts these specials on

 

[esvee]

Received my box of goodies from Ash today and couldn't be happier.

I am a little disappointed that I didn't get more than one mini-ratchet: one for me to be constantly fiddling with at my desk and one to actually keep in my toolbox. I can't put this thing down!

 

[signcrafter]

Received my box of goodies from Ash today and couldn't be happier.

I am a little disappointed that I didn't get more than one mini-ratchet: one for me to be constantly fiddling with at my desk and one to actually keep in my toolbox. I can't put this thing down!

That was fast.

Ash, is there a chance of another sale like this in the future? This will be my first felo tools but if I like them as much as everyone else I would like to place another order for some more screwdrivers like torx and stuff and also some hex bits and pliers.

 

[TXBDan]

I'd also put an order in for $100 or so

 

[FEVERinc]

Received my box of goodies from Ash today and couldn't be happier.

I am a little disappointed that I didn't get more than one mini-ratchet: one for me to be constantly fiddling with at my desk and one to actually keep in my toolbox. I can't put this thing down!