Filling expansion joint cut

[nate379]

I'm a little confused on what to use for filling an expansion joint?

http://www.lowes.com/lowes/lkn?action=productDetail&productId=118023-286-864001&lpage=none

Is that stuff flexable? I can't find any info on the bottle or on the website.

What I bought was this:

http://www.dap.com/product_details.aspx?product_id=18


Idea is to clean and acid water the slab, let it dry, caulk the expansion joints, and throw the epoxy down.

 

[ELS]

I used sikaflex self leveling polyurethane. Comes in small and large caulk gun size tubes. Bought at Home Depot.

 

[nate379]

Will have to check at Home Depot. The only one I know of is out in the end of town while there is a Lowe's not far from home and also one just outside of work.

 

[nate379]

Found what I needed at Lowe's. Was $6 a tube so it better work. Didn't have any foam rods either.. Deepest cut is maybe 1.5" though so I'm just going to fill it.

 

[Cholleman]

Found what I needed at Lowe's. Was $6 a tube so it better work. Didn't have any foam rods either.. Deepest cut is maybe 1.5" though so I'm just going to fill it.

what's the name of the product at lowes? i'd rather shop there than HD.

 

[nate379]

I don't remember but it's a black cardboard tube with some green on it.

Can be found in the caulk aisle.

 

[ELS]

The Sikaflex brand tubes are found in the concrete isle at HD.

 

[nate379]

Yeah I don't shop there cause there is only one store and it's 40 miles from my house and out of my way.

Lowe's is 10 miles from home and there is another on my way home from work too.