To avoid these ads, REGISTER NOW!

Filter/mesh for funnel

bochnak

Well-known member
Joined
Apr 9, 2007
Messages
1,230
Location
Mt. Prospect, IL
I'm currently derusting a tank and would like to strain/filter the vinegar for reuse.

Anyone have any clever ways to add a filter to a funnel? Or can you recommend a funnel with built in screen/mesh?

I guess I can line my current funnel with pantyhose, that would probably work OK.

Just wondering if anyone has any other good ideas.
 
To avoid these ads, REGISTER NOW!
OP
B

bochnak

Well-known member
Joined
Apr 9, 2007
Messages
1,230
Location
Mt. Prospect, IL
Paint filter from body shop.

The paper ones? I have one I picked up from ACE for a home project. I'll give it a try however not reusable.

or maybe even a coffee maker filter, vinegar shouldn't hurt those.

I've tried coffee filters in the past. The filter well however really slow. Think drip coffee slow. It's a 5 gal tank and would like to empty it fast.
 

bowhuntr311

Well-known member
Joined
Aug 3, 2016
Messages
135
Location
North Central Minnesota
Dump your tank into a clean bucket then work on filtering it from there....A coffee filter should remove almost all of your sediment. And a bucket would allow you to dip into it to get as much or as little as need to filter.
 

archauto

Member
Joined
Dec 11, 2007
Messages
9
If you have an old dress shirt that you are about to throw out or its in your "I can wear that shirt when I lose 30 lbs" bag of clothes, they are fine knit and strain things fast.
 

redmondjp

Well-known member
Joined
Nov 25, 2014
Messages
2,318
Location
Redmond, WA
The paper ones? I have one I picked up from ACE for a home project. I'll give it a try however not reusable.



I've tried coffee filters in the past. The filter well however really slow. Think drip coffee slow. It's a 5 gal tank and would like to empty it fast.

No - I've tried the paper coffee filters as well.

You use the reusable coffee filters with the fine-mesh screen in them. Works great and I use them all the time for screen coolant that I have drained out of a vehicle.
 

joeya

New member
Joined
Sep 3, 2012
Messages
4
Location
Pennsylvania
I use steel wool placed in the funnel. The finer the wool (or more tightly packed) the slower but better filtration. Works pretty well most of the time.
 
To avoid these ads, REGISTER NOW!

rshadd

Well-known member
Joined
Dec 29, 2009
Messages
1,598
Location
Doylestown, PA
I bought some Plews funnels recently that came with fine brass screens. They were made in the USA too.

25102054133_8bcc586d6d_c.jpg


25728665855_e7b989abce_c.jpg


25728668265_dd53437031_c.jpg
 
Last edited:

Marctrees

Well-known member
Joined
Mar 5, 2015
Messages
6,265
Location
TX/LA border - Toledo Bend
Work in 2 or three stages.

Any old big funnel, no need to spend $.

First, steel wool or Scotch brite pad to start.

Then one layer of some rag.

If needed, then coffee filter.

You need to go in stages, or you get plugged up waiting for drops to drop. Marc
 

icthruu74

Well-known member
Joined
Jul 26, 2015
Messages
330
Location
Michigan
The original gas filter was chamois. I've never used one, but I've heard about it, I do know that it has to be a real chamois skin, not one of the fake car wash chamois.

A few years back, after issues with water in gas in a boat I purchased a 'Mr funnel' filtered funnel for around $15 and it has worked great (at least I have had no more issues with water in gas).
 

Warrenator

Well-known member
Joined
May 31, 2008
Messages
781
Location
Newberg, OR
Paper towel makes a fine filter. Blue shop towels, even better. Fold them diagonally twice to make them fit the funnel.
 

ynned

Well-known member
Joined
Feb 27, 2013
Messages
1,150
Location
N.E. Ohio
The idea of transferring it to a bucket first is good. Allow the large stuff to settle for a day or so, then dip off the top, so there's a lot less to filter out.
Seems like a lot of trouble to save vinegar.
 
To avoid these ads, REGISTER NOW!
Top Bottom