Finally my 24x32 VW Garage Eastern CT

[vwb5t]

made some more progress,

got tired of forgetting the keys when i went out to the garage

ran some cat5 and coax for future projects.

ran some wire for the welder and compressor

started with a 1000' roll of 12/2 this is all that is left, finally tally was 27 outlets in the garage, 3 outdoor outlets, 2 spot lights, 2 lights over the garage doors, 1 light for the service door, 7 cat5e lines, and 1 coax to a future TV. probably something i missed hopefully i think of it before the walls are closed.

with all that done was finally able to start tearing into my new project to see if this old motor will actually run.

today the garage door openers are finally going in, and soon we will start insulating it and getting the walls closed up.

 

[vwb5t]

did some more work,

finally put the summer tires away

bought a bunch of insulation

started the ceiling but stopped to put a new shelf up.

finished the ceiling, that sucked so much ladder moving glad im down to only walls now. will cover the ceiling this summer when its nicer out and i have some time and help.

and finally packed some more projects into the garage. amazing how much stuff you can fit.

 

[Qrazy]

Looks great neighbor!! Those lights appear to work very well!

 

[DWP1726]

Nice garage, More about the BAJA

Dave

 

[Styx]

Very nice build... Looks like your into VW's just a little...lol...

Any updates. I'm very close to lighting and electrical (2 to 3 weeks out) how are the LED's working for you??? Good idea with the speakers...

Cheers Randy...

 

[vwb5t]

Very nice build... Looks like your into VW's just a little...lol...

Any updates. I'm very close to lighting and electrical (2 to 3 weeks out) how are the LED's working for you??? Good idea with the speakers...

Cheers Randy...

lights are working great, no issues at all with them and still bright as the day they were installed.

 

[vwb5t]

time for an update, lots going on with the garage.

got some insulation in and some of the walls done.

got all my CAT5 run and terminated in the garage still need to pull the wires out to the garage.

started working on the new work benches

took a little trip and picked up a new car trailer and some new shop tools from greg smith equipment

testing my new favorite tool out

picked up a few other things to make life easier

dug out and built a new parking area to keep my dually

still a bunch of work to do, i need to paint the walls, finish the ceiling with plywood and paint that as well. pull the cable and CAT5 out to that garage conduit is already in.

 

[hunterguy86]

Which 4 post is that? How hard was it to set up?


Sent from my iPhone using Tapatalk

 

[Bigdukaaa]

what are you running off the POE

 

[vwb5t]

Which 4 post is that? How hard was it to set up?


Sent from my iPhone using Tapatalk

atlas 409-hp and it was fairly simple to setup, just heavy 2 people made it much easier

what are you running off the POE

security cameras for inside and outside garage.

 

[Vette10R]

Shop looks great, how is that speaker set up working out? Do you have any info on the speakers and amp you used? I like to crank up the stereo when I'm working in the garage.

 

[vwb5t]

speakers work great, even loud they sound pretty good. amp is an audiosource AMP100 2 channel amp

 

[vwb5t]

more progress,

finally got the pumps for my rolling jacks that were on back order, also added some slim LED light bars to the lift, much easier to see now.

added a telescoping mount for the free TV my buddy gave me

and also got a free 20 year old parts washer that has never been used.

 

[hnsy]

Are those the LED lights from Costco?

I have the ones from Costco, would highly recommend them

Sent from my Nexus 5 using Tapatalk

 

[vwb5t]

got some new tools for the garage and got one of my benches built finally.

and one of the benches, its off at the powder coaters right now, going to build the other one sometime this week.

also got a new tig but don't have any pictures of it but its gotten a decent workout building the bench.

 

[vwb5t]

one work bench back from the powder coaters now on to build the second bench

 

[Qrazy]

Looks great!!!

 

[vwb5t]

work benches finally done