Fire ball fab jigs

[koditten]

I saw this vid a bit ago. I'm very impressed. Might have to pony up and get me one.

I do think I would make my own out of aluminum though.

 

[Thumper68]

If you go to his website he has them in AL as well and in 2 different sizes. He also does some good vids on Youtube.

When the play money builds back up I will be ordering a few from him.

 

[RivennHewn]

They have a pretty good instagram page under fireballtool.

maybe he'll offer all GJ customers a discount if we all follow him.

 

[nine4gmc]

Pretty slick

 

[uniballer]

They have a pretty good instagram page under fireballtool.

maybe he'll offer all GJ customers a discount if we all follow him.

What is instagram?

 

[RivennHewn]

What is instagram?

gotta keep up dude, the world is passing you by.

 

[Stuart in MN]

A few people in the Youtube machinist community have his products and have demonstrated them in their videos - Abom79 and Outside Screwball are examples, and there are probably others. His stuff looks pretty good.

 

[bullnerd]

Nice.

I like his welding table too.

 

[LXCam]

What a great idea. Now I know what I'll be putting on my Christmas wish list

 

[strength_and_power]

I just ordered the cast iron mini set. Will post some pics and feedback once received.
I had slots put in my welding table top as well, it's great for clamping, I'm guessing I can clamp 80% of my table. Only regret is not going with a thicker top.


Sent from my iPhone using Tapatalk

 

[Kaizen]

Nice.



I like his welding table too.

Yea it is slick. That's how I found his channel. On his angle jigs I wonder how much it would take to put it out of square


Sent from my iPhone using Tapatalk

 

[steel 35]

On my to do list, If I could only get to my table!

 

[Ditch]

Sweet stuff !

 

[jimgood]

That's nice. I'm pretty sure if I bought the kit and tried to weld it, it would warp.

 

[Richard Cranium]

Man that would be nice, too bad I don't have a welding table. I need to wire my shop for my welder. Rich

 

[iajonesy]

Those are really nice fixtures. The "mini monsters" are large enough for most home projects and made of cast iron,they should last a good long time. I'm sure I have to have these tools.Seems like such a simple idea, why didn't I think of them.

Mike

 

[Thumper68]

Right On! Im glad you guys found my welding fixtures/shop tools. Any new customers are eligible for 10% off. Type NEWCUSTOMER at checkout. Thanks
Be sure to stop by my FABTECH booth in Chicago 2017 and check us out!
Jason
Fireball Tool

Jason glad you found this, (I sent the e-mail )

I will be sure to look you up at fabtech!

 

[koditten]

Thanks for getting the word out to Jason, @Thumper.

I didn't even realize this was a production item last night when I posted the link. I was just randomly clicking on welding vids to get me closer to quitting time.

These things will really made my trailer building easier.

Now to decide what one I need the most. Hmmm?

Welcome to the Garage Journal, @Fireball Tool

Kirk

 

[Thumper68]

Thanks for getting the word out to Jason, @Thumper.

I didn't even realize this was a production item last night when I posted the link. I was just randomly clicking on welding vids to get me closer to quitting time.

These things will really made my trailer building easier.

Now to decide what one I need the most. Hmmm?

Welcome to the Garage Journal, @Fireball Tool

Kirk

Hey I might have had a ulterior motive, ok I did, like I said before as soon as the toy fund gets a bit healthier I will be ordering some for myself, and it never hurts to help promote a well made home grown product.

 

[strength_and_power]

Right On! Im glad you guys found my welding fixtures/shop tools. Any new customers are eligible for 10% off. Type NEWCUSTOMER at checkout. Thanks

Be sure to stop by my FABTECH booth in Chicago 2017 and check us out!

Jason

Fireball Tool

Any way to make this retroactive? I just ordered this morning.


Sent from my iPhone using Tapatalk

 

[koditten]

I hear you. That magic square is going on my "must have" list.

 

[LXCam]

Right On! Im glad you guys found my welding fixtures/shop tools. Any new customers are eligible for 10% off. Type NEWCUSTOMER at checkout. Thanks
Be sure to stop by my FABTECH booth in Chicago 2017 and check us out!
Jason
Fireball Tool

Welcome to the site Jason. If you hadn't noticed it's a damn good place for guys like you to hang out at.


When do you think you'll have more of the large self assembly kits back in stock?

 

[4EyedTurd]

Impressive tools, every time I use my cheapy speed square I think about looking for something better.

 

[Iron-Iceberg]

This site will be the end of me. It's already the end of my wallet. Auggggg.

 

[Duker]

I have his aluminum square. It has been a huge time saver in doing a railing project I am working on. Being able to hold a post square and offset to mounting plate has been great.

*

 

[koditten]

I watched the entire series of vids. Very impressed.

I was amazed at how imperfect the speed squares were.

Amazed at how perfectly square the Fire Ball squares were. Less than 5000ths out of square.

I don't think I need anything that perfect, but it's nice to know how true they are.

I need to pester the Mrs. to see if she will give some of her egg money

 

[speed bump]

Cool idea, I will have to remember these jigs when I start a new fab project.

 

[Duker]

I like to support folks who contribute/support the GJ as it somewhat self serving as the amount of expertise on the site is remarkable and I have to yet find someone who wasn't willing to answer some questions or point me in the right direction when I was stuck on a project. I especially like to support small business entrepreneurs who make a great product. An example, warning...shameless plug ... is one of my new favorite items a Bux-Box wallet http://randomfab.us/index.html made by GJ member Joe aka Kaslx.

So, since I have some major welding projects coming up in my new shop build I just ordered the cast-iron fabricator package using the code Jason supplied earlier in the thread. The link has been updated to take orders if you are interested.

https://www.fireballtool.com/product-page/cast-iron-fabricator-package





Sent from my iPad using Tapatalk Pro

 

[A**holes Garage]

Right On! Im glad you guys found my welding fixtures/shop tools. Any new customers are eligible for 10% off. Type NEWCUSTOMER at checkout. Thanks
Be sure to stop by my FABTECH booth in Chicago 2017 and check us out!
Jason
Fireball Tool

Damn,never made it past the video, and I just ordered, Any chance for the discount now?

 

[Duker]

I bet they would give you the discount. Shoot them an email.... you will probably get a reply back from Jessica who helped me this morning .


Sent from my iPhone using Tapatalk Pro

 

[koditten]

I played around with drafting up some patterns. Had some aluminum plate laying around. Decided to see how accurate I could get using my own tools.

I need to grab some 3" aluminum bar stock before I can go any further.

I'm not going to sell any, so I don't think there is any issue with me building my own.

I do want that magic square and the wife has the info to get me one for my birthday.

 

[koditten]

Test.

 

[koditten]

 

[koditten]

Attempting to make my own.

 

[koditten]

Hole saw and skill saw work great on aluminum plate.

 

[koditten]

 

[koditten]

 

[koditten]

Started assembling the jigs.

 

[koditten]

Started assembling the jigs.

 

[koditten]

This is about as close as I can get it without machining. I don't have machining equipment, so this is where it stays.